[LinuxBIOS] Enabling USB 2.0

Anil B G bg.anil at gmail.com
Fri Sep 1 17:40:01 CEST 2006

Thanks. I plan to boot from SATA and not from USB.  Do any other boards
supported by LinuxBIOS (whose source is available in the source tree)
bringup USB that I could use as a reference?

On 9/1/06, Jonathan Sturges <jsturges at speakeasy.net> wrote:
> Anil B G wrote:
> > Hi,
> >   I am trying to enable USB on a board similar to Tyan s2892 (CK804)
> > chipset?
> > Is there anything that else that needs to be done separately other
> > than setting the irqs et al correctly? Specifically do we need to
> > write some sort of a driver to enable the USB host controller.
> >
> > Thanks
> > Anil
> Assuming you don't hope to boot from USB, all you really should need is
> to setup the IRQ map, AFAIK.  Then the Linux kernel will detect it and
> be able to attach the appropriate driver.
> -Jonathan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20060901/3c139955/attachment.html>

More information about the coreboot mailing list