[LinuxBIOS] (fwd) Re: USB bootloader
Stefan Reinauer
stepan at coresystems.de
Thu Sep 7 13:21:35 CEST 2006
Hi,
anyone has an idea on this one?
----- Forwarded message from Al Boldi -----
Date: Thu, 7 Sep 2006 13:52:28 +0300
From: Al Boldi <a1426z at gawab.com>
To: Stefan Reinauer <stepan at coresystems.de>
Cc: openbios at lists.openbios.org, etherboot-discuss at lists.sourceforge.net
Subject: Re: USB bootloader
Thanks for your response!
Stefan Reinauer wrote:
> * Al Boldi <a1426z at gawab.com> [060904 20:58]:
> > FILO version 0.5 ....
> > Can't get memory map from firmware. Using hardcoded default.
> > Press ...
> > boot: uda1:/vmlinuz
> > LinuxLabs USB bootloader
> > New USB device, setting address 2 (repeats 1-4 times)
> > boot: uda1:/vmlinuz
> > LinuxLabs USB bootloader
> > Out of heap space
>
> Please try increasing the heap space in i386/ldscript by changing the
> following lines:
> /* 16KB heap and stack */
> HEAP_SIZE = 16384;
> to
> /* 32KB heap and 16K stack */
> HEAP_SIZE = 32768;
>
> > And, how can filo 0.5 be fixed to boot USB?
>
> If the message stays, try all the way up to 262144.
Ok, the message is gone, but it still does not boot.
Turning on debug repeats this:
FILO version 0.5 (root at localhost) Thu Sep 7 13:40:13 AST 2006
collect_sys_info: boot eax = 0x0
collect_sys_info: boot ebx = 0x0
collect_sys_info: boot arg = 0xfeee330
collect_elfboot_info: Bootloader: Etherboot
collect_elfboot_info: Version: 5.4.1
malloc_diag: alloc: 0 bytes (0 blocks), free: 262136 bytes (1 blocks)
malloc_diag: alloc: 16 bytes (1 blocks), free: 262120 bytes (1 blocks)
collect_elfboot_info: Image name: /tftpboot/boot/pxelinux.0
malloc_diag: alloc: 32 bytes (2 blocks), free: 262104 bytes (1 blocks)
collect_linuxbios_info: Searching for LinuxBIOS tables...
Can't get memory map from firmware. Using hardcoded default.
malloc_diag: alloc: 72 bytes (3 blocks), free: 262064 bytes (1 blocks)
collect_sys_info: 0000000000000000-00000000000a0000
collect_sys_info: 0000000000100000-0000000002000000
collect_sys_info: RAM 32 MB
relocate: Current location: 0x100000-0x16d827
relocate: Relocating to 0x1f927d0-0x1fffff7... ok
setup_timers: CPU 413 MHz
pci_init: Scanning PCI: found 9 devices
malloc_diag: alloc: 192 bytes (4 blocks), free: 261944 bytes (1 blocks)
pci_init: 00:00.0 8086:7120 0600 00
pci_init: 00:01.0 8086:7121 0300 00
pci_init: 00:1e.0 8086:2418 0604 00
pci_init: 01:04.0 1282:9102 0200 00
pci_init: 01:05.0 10ec:8139 0200 00
pci_init: 01:0a.0 1191:8040 0100 00
pci_init: 00:1f.0 8086:2410 0601 00
pci_init: 00:1f.1 8086:2411 0101 80
pci_init: 00:1f.2 8086:2412 0c03 00
boot: uda1:/vmlinuz
malloc_diag: alloc: 216 bytes (5 blocks), free: 261920 bytes (1 blocks)
malloc_diag: alloc: 232 bytes (6 blocks), free: 261904 bytes (1 blocks)
file_open: dev=uda1, path=/vmlinuz
LinuxLabs USB bootloader
uhc_init: Found UHCI at ffffd000
uhc_reset: Resetting UHCI
uhc_init: uhc_init setting framelist to: 01e927d0
uhc_start: Starting UHCI
dump_uhci: HCI at ffffd000
malloc_diag: alloc: 8432 bytes (7 blocks), free: 253704 bytes (1 blocks)
init_framelist: frame_list is at 12a000
dump_link: frame_list_link: addr: 00125850
dump_link: frame_list_link: raw addr: 1fb8020
dump_link: frame_list_link: terminate: 0
dump_link: frame_list_link: queue: 1
dump_link: frame_list_link: depth: 0
malloc_diag: alloc: 11512 bytes (8 blocks), free: 250624 bytes (1 blocks)
poll_usb: poll_usb1 i=0 poll_u_root_hub1 v=00001083 poll_u_root_hub2
v=00001083 poll_u_root_hub21 v=00001083 Connection on port d010
New USB device, setting address 2
uhci_control_msg: uhci_control_msg: request_type = 0 request = 5 wLength=0
malloc_diag: alloc: 15616 bytes (9 blocks), free: 246520 bytes (1 blocks)
dump_uhci: HCI at ffffd000
dump_td: failed_transaction: TD(0011d860):
dump_td: failed_transaction: type: SETUP
dump_td: failed_transaction: retries: 3
dump_td: failed_transaction: IOC
dump_td: failed_transaction: active: 0001
dump_td: failed_transaction: device_addr: 00
dump_td: failed_transaction: endpoint: 0
dump_td: failed_transaction: data_toggle: 0
dump_td: failed_transaction: max_transfer: 7
dump_td: failed_transaction: actual: 0
dump_td: failed_transaction: link:
dump_link: failed_transaction: addr: 0011d880
dump_link: failed_transaction: raw addr: 1fb0050
dump_link: failed_transaction: terminate: 0
dump_link: failed_transaction: queue: 0
dump_link: failed_transaction: depth: 0
dump_td: failed_transaction: TD(0011d880):
dump_td: failed_transaction: type: IN
dump_td: failed_transaction: retries: 0
dump_td: failed_transaction: active: 0001
dump_td: failed_transaction: device_addr: 00
dump_td: failed_transaction: endpoint: 0
dump_td: failed_transaction: data_toggle: 1
dump_td: failed_transaction: max_transfer: 7ff
dump_td: failed_transaction: actual: 0
dump_td: failed_transaction: link:
dump_link: failed_transaction: addr: fe16d830
dump_link: failed_transaction: raw addr: 0000
dump_link: failed_transaction: terminate: 1
dump_link: failed_transaction: queue: 0
dump_link: failed_transaction: depth: 0
malloc_diag: alloc: 11512 bytes (8 blocks), free: 250624 bytes (1 blocks)
configure_device: configure_device: set_address failed!
poll_u_root_hub: poll_u_root_hub1 v=00001080 poll_usb1 i=0 poll_u_root_hub1
v=00001083 poll_u_root_hub2 v=00001083 poll_u_root_hub21 v=00001083
Connection on port d010
New USB device, setting address 2
uhci_control_msg: uhci_control_msg: request_type = 0 request = 5 wLength=0
malloc_diag: alloc: 15616 bytes (9 blocks), free: 246520 bytes (1 blocks)
dump_uhci: HCI at ffffd000
dump_td: failed_transaction: TD(0011d860):
dump_td: failed_transaction: type: SETUP
dump_td: failed_transaction: retries: 3
dump_td: failed_transaction: IOC
dump_td: failed_transaction: active: 0001
dump_td: failed_transaction: device_addr: 00
dump_td: failed_transaction: endpoint: 0
dump_td: failed_transaction: data_toggle: 0
dump_td: failed_transaction: max_transfer: 7
dump_td: failed_transaction: actual: 0
dump_td: failed_transaction: link:
dump_link: failed_transaction: addr: 0011d880
dump_link: failed_transaction: raw addr: 1fb0050
dump_link: failed_transaction: terminate: 0
dump_link: failed_transaction: queue: 0
dump_link: failed_transaction: depth: 0
dump_td: failed_transaction: TD(0011d880):
dump_td: failed_transaction: type: IN
dump_td: failed_transaction: retries: 0
dump_td: failed_transaction: active: 0001
dump_td: failed_transaction: device_addr: 00
dump_td: failed_transaction: endpoint: 0
dump_td: failed_transaction: data_toggle: 1
dump_td: failed_transaction: max_transfer: 7ff
dump_td: failed_transaction: actual: 0
dump_td: failed_transaction: link:
dump_link: failed_transaction: addr: fe16d830
dump_link: failed_transaction: raw addr: 0000
dump_link: failed_transaction: terminate: 1
dump_link: failed_transaction: queue: 0
dump_link: failed_transaction: depth: 0
malloc_diag: alloc: 11512 bytes (8 blocks), free: 250624 bytes (1 blocks)
configure_device: configure_device: set_address failed!
(...repeats...)
Thanks again!
--
Al
----- End forwarded message -----
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
More information about the coreboot
mailing list