[LinuxBIOS] GA-M57SLI-S4 dual bios pins
uwe at hermann-uwe.de
Sun Apr 8 00:59:09 CEST 2007
On Sun, Apr 08, 2007 at 12:13:52AM +0200, ST wrote:
> Looking at the jumpers it looks like the flash program itself can control
> which of the (physically partly non-existant) flash chips is to be
> programmed. Pin 13 of the PM49FL004 is #Init. Init has to be high while
> while accessing the chip (in both Modes LPC and FWH). So i am pretty sure
> that flashbios is may be the only needed key to make this work. It would be
> nice if anybody could give me an pointer where this Mainboard specific stuff
> is located in flashbios (i have only glanced over the sources)
You mean flashrom (not flashbios)?
It has been recently moved to board_enable.c, see
> and if someone
> knows which pin is connected to the soldered flash chip.
No idea, sorry.
> I would like to buy another flash chip. But all local dealers don't have any
> flash chips at hand :-(. Do i need the PM49FL004 or will any other PLCC32
> flash chip do? Any pointers for german buyers?
Most electronics dealers should have some, e.g. Conrad: http://www.conrad.de.
Or try one of these:
eBay has lots of them, too (but not too cheap, usually).
http://www.hermann-uwe.de | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 189 bytes
Desc: Digital signature
More information about the coreboot