[LinuxBIOS] GA-M57SLI-S4 bios programming

ST st at iss.tu-darmstadt.de
Thu Apr 12 18:09:59 CEST 2007


I am still puzzled how the second flash chip is to be used on the GA-M57SLI-S4 
board. As Peter mentioned LPC is used on this board. Would it be enough to 
use the flash chips (for programming and reading) to just disable one chip 
with the #init signal? It seems as if only one of the chips gets the #init to 
low, the other one will stay in reset mode and will keep its I/O pins in Z 


More information about the coreboot mailing list