[LinuxBIOS] about programming BIOS Savior

[Ning (Michael) Qu]

Hi, Mondrian,

Unfortunately, after patching flashrom, the results remain the same as
before. Only the page 7 is programmed. I guess I should first check
the WP pin of Savior, and then perhaps I need this patch to program
it. Thanks for your help!

Best,
Ning

On 4/25/07, Mondrian Nuessle <nuessle at uni-mannheim.de> wrote:
> Hi!
> You need to enable writing to the flash. In case of the Iwill board,
> some SuperIO GPIOs need to be properly set.
> I sent an email to the list with a patch attached, which configures
> flashrom to handle the iwill dk8_htx correctly.
>
> Regards,
> Mondrian
>
> --
>  Mondrian Nuessle                 University of Mannheim
>  Phone: +49 621 181 2717          Computer Architecture Group
>  Fax:   +49 621 181 2713          http://ra.ti.uni-mannheim.de
>  mailto:nuessle at uni-mannheim.de
>