[LinuxBIOS] Setting up ethernet - help
joe at smittys.pointclark.net
Tue Aug 14 18:54:04 CEST 2007
Quoting Peter Stuge <peter at stuge.se>:
> On Tue, Aug 14, 2007 at 12:30:14PM -0400, Joseph Smith wrote:
>> > On Tue, Aug 14, 2007 at 12:06:25PM -0400, Joseph Smith wrote:
>> >> lspci-tvv
>> >> -[0000:00]-+-1e.0-[0000:01]----08.0 Intel Corporation 82801DB PRO/100
>> >> VE (CNR) Ethernet Controller
>> >> How the heck do I set this up in Config.lb? HELP??
>> > Looks like it's been done before:
>> > --8<-- src/mainboard/asus/mew-vm/Config.lb
>> > chip southbridge/intel/i82801xx # Southbridge
>> > device pci 1e.0 on # PCI Bridge
>> > #chip drivers/pci/onboard
>> > # device pci 1.0 on end
>> > # register "rom_address" = "0xfff80000"
>> > #end
>> > end
>> > ..
>> > end
>> > -->8--
>> Does that mean I would have to cat in a ethernet rom?
> Do you or the chip need one? Is there one in the factory BIOS or in a
> standalone flash chip or none at all?
>> Also, wouldn't it be device pci 08.0 on end
> Yep. I only looked for the PCI-PCI bridge.
I don't need an ethernet rom. Etherboot would take care of that
correct? But in the config above it is alocating 0xfff80000 for a PCI
rom, correct? My VGA bios is already using 0xfff80000.
Thanks - Joe
More information about the coreboot