[LinuxBIOS] PCI: Left over static devices. Check your Config.lb

[Steve Isaacs]

On Sun, 2007-12-09 at 12:26 -0800, yhlu wrote:
> whole boot log and your Options.lb in your MB dir ?
> 

I just now realized that this might be what you wanted. This is the
output sent to the serial port during boot.

Steve
---------

LinuxBIOS-2.0.0._apollo_Fallback OBJ-XXXX-XX Mon Dec 10 11:19:06 PST
2007 starting...

(0,1) link=01
(1,0) link=01
02 nodes initialized.
core0 started:  01
 01 02 03SBLink=00
NC node|link=00
SMBus controller enabled



INIT detected from  ---- {APICID = 00 NODEID = 00 COREID = 00} ---

Issuing SOFT_RESET...
(0,1) link=01
(1,0) link=03
02 nodes initialized.
core0 started:  01
*01*00000001
*02*00000001
*03*00000001
SBLink=00
NC node|link=00
SMBus controller enabled
ht reset -
SMBus controller enabled
Ram1.00
Ram1.01
Ram2.00
Registered
333Mhz
Interleaved
RAM: 0x00400000 KB
Ram2.01
Registered
333Mhz
Interleaved
RAM: 0x00800000 KB
Ram3
Initializing memory:  done
Initializing memory:  done
RAM: 0x00900000 KB
Setting variable MTRR 02, base: 0000MB, range: 0800MB, type WB
Setting variable MTRR 03, base: 0800MB, range: 0400MB, type WB
DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=0f done
DQS Training:RcvrEn:Pass1: 01 CTLRMaxDelay=12 done
DQS Training:DQSPos: 00 done
DQS Training:DQSPos: 01 done
DQS Training:RcvrEn:Pass2: 00 CTLRMaxDelay=41 done
DQS Training:RcvrEn:Pass2: 01 CTLRMaxDelay=42 done
DQS Training:tsc[00]=0000000752224b10
DQS Training:tsc[01]=00000007571fbef7
DQS Training:tsc[02]=000000075724e540
DQS Training:tsc[03]=000000087986923e
DQS Training:tsc[04]=000000088462e3bf
mem_trained[00]=01
mem_trained[01]=01
Ram4
v_esp=000ceef8
testx = 5a5a5a5a
Copying data from cache to ram -- switching to use ram as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to ram.
src=fffe8000
dst=00004000
linxbios_ram.nrv2b length = 000088b7
linxbios_ram.bin   length = 00017e0c
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0._apollo_Fallback Mon Dec 10 11:19:06 PST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
  PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] enabled
  PCI: 00:19.3 siblings=1
CPU: APIC: 02 enabled
CPU: APIC: 03 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] enabled
PCI: 00:00.0 [1166/0140] enabled
PCI: 00:08.0 [1166/0140] enabled next_unitid: 000d
PCI: 00:00.0 [1166/0031] enabled
PCI: 00:0d.0 [1166/0031] enabled next_unitid: 0015
PCI: pci_scan_bus for bus 00
PCI: 00:01.0 [1166/0031] enabled
PCI: 00:02.0 subbordinate bus PCI-X
PCI: 00:02.0 [1166/0406] enabled
PCI: 00:02.1 [1166/0429] enabled
PCI: 00:03.0 subbordinate bus PCI-X
PCI: 00:03.0 [1166/0406] enabled
PCI: 00:03.1 [1166/0429] enabled
PCI: 00:04.0 subbordinate bus PCI Express
PCI: 00:04.0 [1166/0420] enabled
PCI: 00:04.1 [1166/042a] enabled
PCI: 00:05.0 subbordinate bus PCI Express
PCI: 00:05.0 [1166/0422] enabled
PCI: 00:05.1 [1166/042a] enabled
PCI: 00:07.0 [1166/0408] enabled
PCI: 00:07.1 [1166/0215] enabled
PCI: 00:07.2 [1166/040a] enabled
PCI: 00:07.4 [1166/040e] enabled
PCI: 00:07.5 [1166/040e] enabled
PCI: 00:07.6 [1166/040e] enabled
PCI: 00:08.0 [1166/0140] enabled
PCI: 00:09.0 subbordinate bus PCI Express
PCI: 00:09.0 [1166/0142] enabled
PCI: 00:0a.0 subbordinate bus PCI Express
PCI: 00:0a.0 [1166/0144] enabled
PCI: 00:0b.0 subbordinate bus PCI Express
PCI: 00:0b.0 [1166/0142] enabled
PCI: 00:0c.0 subbordinate bus PCI Express
PCI: 00:0c.0 [1166/0144] enabled
PCI: 00:01.1
PCI: Left over static devices.  Check your Config.lb