[LinuxBIOS] PCI: Left over static devices. Check your Config.lb

[yhlu]

On Dec 10, 2007 1:51 PM, ron minnich <rminnich at gmail.com> wrote:
> On Dec 10, 2007 1:39 PM, yhlu <yinghailu at gmail.com> wrote:
>
> > No, you don't need that. I have made it automatically detect that. So
> > you only need the chain that down to superio.
> > if my memory is right, the auto detect is in northbridge.c
>
> oops, forgot you had done that!
>
> So, what should his Config look like?

northbridge/amd/amdk8/root_complex
 device apic_cluster 0 on
   chip cpu/amd/socket_F
     device apic 0 on end
   end
 end
 device pci_domain 0 on
   chip northbridge/amd/amdk8
     device pci 18.0 on #  northbridge
                        #  devices on link 0
       chip southbridge/broadcom/bcm21000
         device pci 0.0 on end
         device pci 1.0 on end
         device pci 2.0 on end
         device pci 3.0 on end
         device pci 4.0 on end
       end
       chip southbridge/broadcom/bcm11000
         device pci 0.0 on end
         device pci 1.0 on end
         device pci 1.1 on end
         device pci 2.0 on end
         device pci 2.1 on end
         device pci 3.0 on end
         device pci 3.1 on end
         device pci 4.0 on end
         device pci 4.1 on end
         device pci 6.0 on end
         device pci 6.1 on end
         device pci 6.2 on
           chip superio/smsc/sch4304
             device  pnp 2e.0 off  # Floppy
               io 0x60 = 0x3f0
               irq 0x70 = 6
               drq 0x74 = 2
             end
             device pnp 2e.3 on  # Parallel Port
               io 0x60 = 0x378
               irq 0x70 = 7
             end
             device pnp 2e.4 on  # Com 1
               io 0x60 = 0x3f8
               irq 0x70 = 4
             end
             device pnp 2e.5 on # Com 2
               io 0x60 = 0x2f8
               irq 0x70 = 3
             end
             device pnp 2e.6 on # RTC
               io 0x60 = 0x70
               io 0x62 = 0x72
             end
             device pnp 2e.7 on  # Keyboard
               io 0x60 = 0x60
               io 0x62 = 0x64
               irq 0x70 = 1
             end
             #device pnp 2e.7 off
             #end
             #device pnp 2e.B off
             #end
           end
         end
         device pci 6.3 off
         end
         device pci 6.4 on
         end
         device pci 6.5 on
         end
         device pci 6.6 on
         end
       end # bcm11000
     end #  device pci 18.0
     device pci 18.1 on
     end
     device pci 18.2 on
     end
     device pci 18.3 on
     end
   end
 end #pci_domain
end