[LinuxBIOS] Topsearch motherboard

[Cimino Vittorio]

Hi,

When i launch memtest all are ok (it recognize the memory area as reported into table at 0x0530). If i launch a kernel (see later) the system restart. 

Any help ??



Linuxbios V2 report this memory map area

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-88) Type: WB
DONE fixed MTRRs
call enable_fixed_mtrr()
Setting variable MTRR 0, base:    0MB, range:  128MB, type WB
ADDRESS_MASK_HIGH=0xf
DONE variable MTRRs
Clear out the extra MTRR's
call enable_var_mtrr()
Leave x86_setup_var_mtrrs

Ram areas
  [0x0000000000000000, 0x0000000000001000) Reserved
  [0x0000000000001000, 0x00000000000a0000) RAM
  [0x00000000000a0000, 0x00000000000c0000) Reserved
  [0x00000000000c0000, 0x00000000000f0000) Reserved
  [0x00000000000f0000, 0x0000000000100000) Reserved
  [0x0000000000100000, 0x0000000008000000) RAM

Filo 0.5 report this

collect_linuxbios_info: Searching for LinuxBIOS tables...
find_lb_table: Found candidate at: 00000530
find_lb_table: header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table: record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at: 00000530
convert_memmap: 0x00000000000000 0x00000000001000 16
convert_memmap: 0x00000000001000 0x0000000009f000 1
convert_memmap: 0x000000000a0000 0x00000000020000 2
convert_memmap: 0x000000000c0000 0x00000000030000 2
convert_memmap: 0x000000000f0000 0x00000000010000 16
convert_memmap: 0x00000000100000 0x00000007f00000 1
collect_sys_info: 0000000000001000-00000000000a0000
collect_sys_info: 0000000000100000-0000000008000000
collect_sys_info: RAM 128 MB


Filo Report This:

Booting 'hda1:/boot/vmlinuz-2.6.20 root=/dev/hda1 console=ttyS0'
malloc_diag: alloc: 272 bytes (4 blocks), free: 16104 bytes (1 blocks)
malloc_diag: alloc: 288 bytes (5 blocks), free: 16088 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.20
devopen: Partition 1 start 62 length 62620
Mounted ext2fs
malloc_diag: alloc: 272 bytes (4 blocks), free: 16104 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 288 bytes (5 blocks), free: 16088 bytes (1 blocks)
file_open: dev=hda1, path=/boot/vmlinuz-2.6.20
devopen: already open
malloc_diag: alloc: 272 bytes (4 blocks), free: 16104 bytes (1 blocks)
Found Linux version 2.6.20 (bellard at voyager.localdomain) #2 SMP Sun Feb 11 19:54
:51 CET 2007 (protocol 0x205) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 0000000000100000 - 0000000008000000
set_memory_size: ramtop=0x8000000
set_memory_size: ext_mem_k=64512, alt_mem_k=130048
parse_command_line: original command line: "root=/dev/hda1 console=ttyS0"
parse_command_line: kernel command line at 0x91000
parse_command_line: kernel command line (28 bytes): "root=/dev/hda1 console=ttyS
0"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1f038c
Loading kernel... ok
start_linux: eip=0x100000
Jumping to entry point...
0

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20071227/ae8c126d/attachment.html>