[LinuxBIOS] The two load RAM codes.
yinghai.lu at amd.com
Sat Feb 3 01:25:07 CET 2007
LinuxBIOS have three parts
1. linuxbios for init RAM, and Cache_as_RAM. Code is Flash, and
stack is in CACHE. From cache_as_ram_main()
2. linuxbios_ram: for PCI device handling. --- from hardwaremain()
Code is in ram and unzipped from rom by 1.
3. payload: it could be Etherboot ( boot from Network) or Kernel.
Elfloader in 2 will load payload and jmp to it.
Also the flash will contain three linuxbios.rom
Failover will be used to init 64K above rom access.
From: linuxbios-bounces at linuxbios.org
[mailto:linuxbios-bounces at linuxbios.org] On Behalf Of Feng, Libo
Sent: Thursday, February 01, 2007 8:16 PM
To: linuxbios at linuxbios.org
Subject: [LinuxBIOS] The two load RAM codes.
I am studying the LinuxBios project. I have a question about the RAM
code: from Makefile, it seems that LinuxBios could load codes from FLASH
to RAM twice, first for linuxbios_ram, second for so-called payload. My
understanding is correct or not. However, also from Makefile, it seems
that linuxbios is dependent on LINUXBIOS_RAM_ROM, but doesn't include
it. The below is abstracted from a Makefile for via epia-m based on
linuxbios: crt0.o $(INIT-OBJECTS) $(LINUXBIOS_APC) $(LINUXBIOS_RAM_ROM)
$(CC) -nostdlib -nostartfiles -static -o $@ -T ldscript.ld
$(CROSS_COMPILE)nm -n linuxbios | sort > linuxbios.map.
So, there is no action on LINUXBIOS_RAM_ROM. Does it mean linuxbios_ram
is not very important. Even without it, the system is also ok?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the coreboot