[LinuxBIOS] Intel 815

Anton anton.borisov at gmail.com
Thu Jan 11 21:32:08 CET 2007

On Sun, 3 Dec 2006 04:01:15 +0100
Peter Stuge <stuge-linuxbios at cdy.org> wrote:

> On Sat, Dec 02, 2006 at 03:10:02PM -0500, Corey Osgood wrote:
> > I'm thinking something like this: connect two plcc sockets
> > together, back to back, sodiering together all the connectors
> > except chip enable and/or power.
> Sure, it will work just fine. I would suggest wiring between the two
> PLCC sockets however, since they're keyed and don't handle mirroring
> without help.
> Or - make a board for two SMT PLCC sockets.
> > then, de-sodier those connectors from the existing chip. run wires
> > to the motherboard on those lines, and also to a switch, and then
> > also to the pair of plcc sockets.
> I would probably let the switch control one of two AND gates per
> switched signal, the other input being the signal from mobo and
> output going to one socket each.

	Any chances to make it similar for SPI chips?

More information about the coreboot mailing list