[LinuxBIOS] FILO and USB: Out of heap space
Corey Osgood
corey.osgood at gmail.com
Thu Jul 5 05:32:51 CEST 2007
FILO is giving me the error below when using autoboot and attempting to
boot from a usb drive. I think this might be due to this board having 4
USB controllers, but I'm not really sure. The board in question is the
CN700/VT8237R board, booting the factory BIOS and then booting FILO
through grub. USB is enabled in the BIOS, EHCI is disabled, and all USB
controllers are enabled (there's no option to disable some, it's all or
none). BTW, Peter's FILO IDE speedup patch works great on this board!
This error occurs with a fresh checkout as well. I'm hoping someone with
more USB knowledge than me (which doesn't take much) can tell what's
wrong here.
Thanks,
Corey
Error log:
boot:
uda1:/vmlinuz
malloc_diag: alloc: 416 bytes (3 blocks), free: 15960 bytes (1
blocks)
malloc_diag: alloc: 432 bytes (4 blocks), free: 15944 bytes (1
blocks)
file_open: dev=uda1,
path=/vmlinuz
LinuxLabs USB
bootloader
uhc_init: Found UHCI at
fffffd00
uhc_reset: Resetting
UHCI
uhc_init: uhc_init setting framelist to:
1ddaa2d0
uhc_start: Starting
UHCI
dump_uhci: HCI at
fffffd00
uhc_init: Found UHCI at
fffffc00
uhc_reset: Resetting
UHCI
uhc_init: uhc_init setting framelist to:
1ddaa2d0
uhc_start: Starting
UHCI
dump_uhci: HCI at
fffffc00
uhc_init: Found UHCI at
fffffb00
uhc_reset: Resetting
UHCI
uhc_init: uhc_init setting framelist to:
1ddaa2d0
uhc_start: Starting
UHCI
dump_uhci: HCI at
fffffb00
uhc_init: Found UHCI at
fffffa00
uhc_reset: Resetting
UHCI
uhc_init: uhc_init setting framelist to:
1ddaa2d0
uhc_start: Starting
UHCI
dump_uhci: HCI at
fffffa00
malloc_diag: alloc: 8632 bytes (5 blocks), free: 7744 bytes (1
blocks)
init_framelist: frame_list is at
12e000
dump_link: frame_list_link: addr:
00121db0
dump_link: frame_list_link: raw addr:
1decc080
dump_link: frame_list_link: terminate:
0
dump_link: frame_list_link: queue:
1
dump_link: frame_list_link: depth:
0
Out of heap space
More information about the coreboot
mailing list