[LinuxBIOS] PIRQ REF DES AMD LXUVCRDK

Otávio Alcântara otavio.junior at gmail.com
Fri Jul 13 16:12:05 CEST 2007


Marc wrote:


> Otávio,
> Correct, you can't get graphics until a driver is loaded. For a
> test/debug setup that uses the filo menu will only be visable serial.
> Please see this link for the Geode LX framebuffer support.
> http://thread.gmane.org/gmane
>
> > .linux.fbdev.devel/10339
>
> > Marc


Marc,

     I've compiled the kernel image with LX framebuffer driver and the video
got fine! But, for some reason a kernel panic happens when loading initrd,
I've used this initrd on other projects and worked very well. I'm putting
the serial log bellow. Is there any chance to be a problem created by my
bios?

Thanks,

Otávio Alcântara




LinuxBIOS-2.0.0.0Fallback Qua Jun 20 07:45:43 BRT 2007 starting...
_MSR GLCP_SYS_RSTPLL (4c000014) value is: 00000498:00001820
Configuring PLL


LinuxBIOS-2.0.0.0Fallback Qua Jun 20 07:45:43 BRT 2007 starting...
_MSR GLCP_SYS_RSTPLL (4c000014) value is: 00000498:07de0020
Done cpuRegInit
SMBUS READ ERROR:03 device:a2
Ram1.00
Ram2.00
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
SMBUS READ ERROR:03 device:a2
Ram3
DRAM controller init done.
RAM DLL lock
Ram4
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0.0Fallback Sex Jul 13 08:29:57 BRT 2007 booting...
clocks_per_usec: 432
Enumerating buses...
>> Entering northbridge.c: pci_domain_enable
Enter northbridge_init_early
writeglmsr: MSR 0x10000020, val 0x20000000:0x000fff80
writeglmsr: MSR 0x10000021, val 0x20000000:0x080fffe0
writeglmsr: MSR 0x1000002c, val 0x20000000:0x00000003
sizeram: _MSR MC_CF07_DATA: 10077014:00004840
sizeram: sizem 0x200MB
SysmemInit: enable for 512MBytes
usable RAM: 536739839 bytes
SysmemInit: MSR 0x10000028, val 0x2000001f:0xfdf00100
sizeram: _MSR MC_CF07_DATA: 10077014:00004840
sizeram: sizem 0x200MB
SMMGL0Init: 536739840 bytes
SMMGL0Init: offset is 0x80400000
SMMGL0Init: MSR 0x10000026, val 0x29fbe080:0x400fffe0
writeglmsr: MSR 0x10000080, val 0x00000000:0x00000003
writeglmsr: MSR 0x40000020, val 0x20000000:0x000fff80
writeglmsr: MSR 0x40000021, val 0x20000000:0x080fffe0
writeglmsr: MSR 0x4000002e, val 0x20000000:0x00000003
sizeram: _MSR MC_CF07_DATA: 10077014:00004840
sizeram: sizem 0x200MB
SysmemInit: enable for 512MBytes
usable RAM: 536739839 bytes
SysmemInit: MSR 0x4000002a, val 0x2000001f:0xfdf00100
SMMGL1Init:
SMMGL1Init: MSR 0x40000023, val 0x20000080:0x400fffe0
writeglmsr: MSR 0x40000080, val 0x00000000:0x00000001
writeglmsr: MSR 0x400000e3, val 0x60000000:0x033000f0
CPU_RCONF_DEFAULT (1808): 0x25FFFC02:0x11FFDF00
CPU_RCONF_BYPASS (180A): 0x00000000 : 0x00000000
L2 cache enabled
Enabling cache
GLPCI R1: system msr.lo 0x00100130 msr.hi 0x1ffdf000
GLPCI R2: system msr.lo 0x80400120 msr.hi 0x8041f000
Exit northbridge_init_early
Done cpubug fixes
Not Doing ChipsetFlashSetup()
VRC_VG value: 0xffff
Before VSA:
do_vsmbios
buf ilen 35441 olen60466
buf 00060000 *buf 186 buf[256k] 1
buf[0x20] signature is b0:10:e6:80
Call real_mode_switch_call_vsm
biosint: INT# 0x15
biosint: eax 0xbea7 ebx 0x4e53 ecx 0x10000026 edx 0x10000028
biosint: ebp 0x15ed4 esp 0xff0 edi 0x8a71 esi 0x38
biosint:  ip 0x5b3   cs 0x6000  flags 0x46
biosint: gs 0x0 fs 0x0 ds 0x6000 es 0x0
handleint21, eax 0xbea7
biosint: INT# 0x15
biosint: eax 0xbea4 ebx 0x4e53 ecx 0x10000026 edx 0x10000028
biosint: ebp 0x15ed4 esp 0xfee edi 0x8a71 esi 0x38
biosint:  ip 0x5c1   cs 0x6000  flags 0x46
biosint: gs 0x0 fs 0x0 ds 0x6000 es 0x0
handleint21, eax 0xbea4
do_vsmbios: VSA2 VR signature verified
After VSA:
<<<WARNING>>> Graphics init...
 <<WARNING!!!>>> VRC_VG value: 0x2808
Finding PCI configuration type.
PCI: Using configuration type 1
PCI_DOMAIN: 0000 enabled
APIC_CLUSTER: 0 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:01.0 [1022/2080] enabled
PCI: 00:01.1 [1022/2081] enabled
PCI: 00:01.2 [1022/2082] enabled
PCI: 00:0d.0 [10ec/8139] enabled
PCI: 00:0f.0 [1022/2090] enabled
PCI: 00:0f.2 [1022/209a] enabled
PCI: 00:0f.3 [1022/2093] enabled
PCI: 00:0f.4 [1022/2094] enabled
PCI: 00:0f.5 [1022/2095] enabled
PCI: 00:0f.6 [1022/2096] enabled
PCI: 00:0f.7 [1022/2097] enabled
PCI: pci_scan_bus returning with max=000
done
Allocating resources...
Reading resources...
Done reading resources.
Setting resources...
PCI: 00:01.1 10 <- [0x00fd000000 - 0x00fdffffff] mem
PCI: 00:01.1 14 <- [0x00fe000000 - 0x00fe003fff] mem
PCI: 00:01.1 18 <- [0x00fe004000 - 0x00fe007fff] mem
PCI: 00:01.1 1c <- [0x00fe008000 - 0x00fe00bfff] mem
PCI: 00:01.1 20 <- [0x00fe00c000 - 0x00fe00ffff] mem
PCI: 00:01.2 10 <- [0x00fe010000 - 0x00fe013fff] mem
PCI: 00:0d.0 10 <- [0x0000001000 - 0x00000010ff] io
PCI: 00:0d.0 14 <- [0x00fe019000 - 0x00fe0190ff] mem
PCI: 00:0f.0 10 <- [0x0000001cb0 - 0x0000001cb7] io
PCI: 00:0f.0 14 <- [0x0000001400 - 0x00000014ff] io
PCI: 00:0f.0 18 <- [0x0000001c00 - 0x0000001c3f] io
PCI: 00:0f.0 1c <- [0x0000001c80 - 0x0000001c9f] io
PCI: 00:0f.0 20 <- [0x0000001800 - 0x000000187f] io
PCI: 00:0f.0 24 <- [0x0000001c40 - 0x0000001c7f] io
PCI: 00:0f.2 20 <- [0x0000001ca0 - 0x0000001caf] io
PCI: 00:0f.3 10 <- [0x0000001880 - 0x00000018ff] io
PCI: 00:0f.4 10 <- [0x00fe016000 - 0x00fe016fff] mem
PCI: 00:0f.5 10 <- [0x00fe017000 - 0x00fe017fff] mem
PCI: 00:0f.6 10 <- [0x00fe014000 - 0x00fe015fff] mem
PCI: 00:0f.7 10 <- [0x00fe018000 - 0x00fe018fff] mem
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:01.0 cmd <- 145
PCI: 00:01.1 subsystem <- 00/00
PCI: 00:01.1 cmd <- 142
PCI: 00:01.2 cmd <- 142
PCI: 00:0d.0 cmd <- 143
cs5536: cs5536_pci_dev_enable_resources()
PCI: 00:0f.0 cmd <- 149
PCI: 00:0f.2 cmd <- 141
PCI: 00:0f.3 cmd <- 141
PCI: 00:0f.4 cmd <- 142
PCI: 00:0f.5 cmd <- 142
PCI: 00:0f.6 cmd <- 142
PCI: 00:0f.7 cmd <- 142
done.
Initializing devices...
Root Device init
Norwich ENTER init
Norwich EXIT init
PCI: 00:01.0 init
PCI: 00:01.1 init
APIC_CLUSTER: 0 init
Initializing CPU #0
CPU: vendor AMD device 5a2
CPU: family 05, model 0a, stepping 02
model_lx_init
Enabling cache
A20 (0x92): 2
A20 (0x92): 2
CPU model_lx_init DONE
CPU #0 Initialized
PCI: 00:01.2 init
PCI: 00:0d.0 init
PCI: 00:0f.0 init
cs5536: southbridge_init
RTC Init
rct_init finished
Disabling VPCI device: 0x0000106C
Disabling VPCI device: 0x00001075
Disabling VPCI device: 0x0000107E
Disabling VPCI device: 0x00001087
Disabling VPCI device: 0x00001090
Disabling VPCI device: 0x00001099
Disabling VPCI device: 0x000010A2
Disabling VPCI device: 0x000010AB
PCI: 00:0f.2 init
PCI: 00:0f.3 init
PCI: 00:0f.4 init
PCI: 00:0f.5 init
PCI: 00:0f.6 init
PCI: 00:0f.7 init
Devices initialized
Copying IRQ routing tables to 0xf0000...done.
Verifing copy of IRQ routing tables at 0xf0000...done
Checking IRQ routing table consistency...
check_pirq_routing_table() - irq_routing_table located at: 0x000f0000
/home/otavio/LinuxBIOSv2/src/arch/i386/boot/pirq_routing.c:
36:check_pirq_routing_table() - checksum is: 0x00 but should be: 0x96
done.
write_pirq_routing_table(8000785C, BAAB)
PIR Entry 0 Dev/Fn: 8 Slot: 0
INT: A bitmap: 800 PIRQ: 11
INT: B bitmap: 0 PIRQ: 0
INT: C bitmap: 0 PIRQ: 0
INT: D bitmap: 0 PIRQ: 0
Assigning IRQ 11 to 0:1.1
  Readback = 11
Assigning IRQ 11 to 0:1.2
  Readback = 11
PIR Entry 1 Dev/Fn: 78 Slot: 0
INT: A bitmap: 800 PIRQ: 11
INT: B bitmap: 400 PIRQ: 10
INT: C bitmap: 400 PIRQ: 10
INT: D bitmap: 800 PIRQ: 11
Assigning IRQ 10 to 0:f.3
  Readback = 10
Assigning IRQ 11 to 0:f.4
  Readback = 11
Assigning IRQ 11 to 0:f.5
  Readback = 11
PIR Entry 2 Dev/Fn: 68 Slot: 0
INT: A bitmap: 800 PIRQ: 11
INT: B bitmap: 0 PIRQ: 0
INT: C bitmap: 0 PIRQ: 0
INT: D bitmap: 0 PIRQ: 0
Assigning IRQ 11 to 0:d.0
  Readback = 11
PIR Entry 3 Dev/Fn: 0 Slot: 0
INT: A bitmap: 0 PIRQ: 0
INT: B bitmap: 0 PIRQ: 0
INT: C bitmap: 0 PIRQ: 0
INT: D bitmap: 0 PIRQ: 0
PIR Entry 4 Dev/Fn: 0 Slot: 0
INT: A bitmap: 0 PIRQ: 0
INT: B bitmap: 0 PIRQ: 0
INT: C bitmap: 0 PIRQ: 0
INT: D bitmap: 0 PIRQ: 0
PIR Entry 5 Dev/Fn: 0 Slot: 0
INT: A bitmap: 0 PIRQ: 0
INT: B bitmap: 0 PIRQ: 0
INT: C bitmap: 0 PIRQ: 0
INT: D bitmap: 0 PIRQ: 0
Moving GDT to 0x500...ok
Adjust low_table_end from 0x00000530 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote linuxbios table at: 00000530 - 000006c4  checksum ec7f

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

rom_stream: 0xfff89000 - 0xfffeffff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
New segment addr 0x100000 size 0x306e0 offset 0xc0 filesize 0xb248
(cleaned up) New segment addr 0x100000 size 0x306e0 offset 0xc0 filesize
0xb248
New segment addr 0x1306e0 size 0x48 offset 0xb320 filesize 0x48
(cleaned up) New segment addr 0x1306e0 size 0x48 offset 0xb320 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x0000000000100000 memsz: 0x00000000000306e0 filesz:
0x000000000000b248
Clearing Segment: addr: 0x000000000010b248 memsz: 0x0000000000025498
Loading Segment: addr: 0x00000000001306e0 memsz: 0x0000000000000048 filesz:
0x0000000000000048
Jumping to boot code at 0x108bdc
FILO version 0.5 (otavio at labdes15) Fri Jul 13 08:05:08 BRT 2007
collect_linuxbios_info: Searching for LinuxBIOS tables...
find_lb_table: Found canidate at: 00000530
find_lb_table: header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table: record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at: 00000530
convert_memmap: 0x00000000000000 0x00000000001000 16
convert_memmap: 0x00000000001000 0x0000000009f000 1
convert_memmap: 0x000000000f0000 0x00000000010000 16
convert_memmap: 0x00000000100000 0x0000001f6e0000 1
Press <Enter> for default boot, or <Esc> for boot prompt... 2 1 
boot: hda1:/boot/vmlinuz root=/dev/hda1 initrd=/boot/initrd console=tty0
console=ttyS0,115200
hda: LBA 40GB: ST340014A
Mounted ext2fs
Found Linux version 2.6.18 (root at alexandre) #3 SMP Fri Jul 13 09:40:07 BRT
2007 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 0000000000100000 - 000000001f7e0000
set_memory_size: ramtop=0x1f7e0000
set_memory_size: ext_mem_k=64512, alt_mem_k=514944
parse_command_line: original command line: "root=/dev/hda1
initrd=/boot/initrd console=tty0 console=ttyS0,115200"
parse_command_line: kernel command line at 0x91000
parse_command_line: initrd=/boot/initrd
parse_command_line: kernel command line (48 bytes): "root=/dev/hda1
console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x11b91c
Loading kernel... ok
load_initrd: start=0x1f391000 end=0x1f7af000
Loading initrd... ok
start_linux: eip=0x100000
Jumping to entry point...
Linux version 2.6.18 (root at alexandre) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #3 SMP Fri Jul 13 09:40:07 BRT 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 000000001f7e0000 (usable)
0MB HIGHMEM available.
503MB LOWMEM available.
DMI not present or invalid.
Allocating PCI resources starting at 20000000 (gap: 1f7e0000:e0820000)
Detected 431.642 MHz processor.
Built 1 zonelists.  Total pages: 128992
Kernel command line: root=/dev/hda1 console=tty0 console=ttyS0,115200
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 504340k/515968k available (1421k kernel code, 11104k reserved, 546k
data, 160k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 864.59 BogoMIPS
(lpj=1729182)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
CPU0: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
checking if image is initramfs...it isn't (bad gzip magic numbers); looks
like an initrd
Freeing initrd memory: 4216k freed
NET: Registered protocol family 16
PCI: Using configuration type 1
Setting up standard PCI resources
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: PnP BIOS support was not detected.
PCI: Probing PCI hardware
PCI: Using IRQ router default [1022/2090] at 0000:00:0f.0
PCI: Ignore bogus resource 6 [0:0] of 0000:00:01.1
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(943920012.588:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Guessed IRQ 11 for device 0000:00:01.1
PCI: Sharing IRQ 11 with 0000:00:01.2
PCI: Sharing IRQ 11 with 0000:00:0d.0
lxfb 0000:00:01.1: 8192 KB of video memory at 0xfd000000
Console: switching to colour frame buffer device 80x25
fb0: Geode LX frame buffer device
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible
chip
8139cp 0000:00:0d.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
PCI: Guessed IRQ 11 for device 0000:00:0d.0
PCI: Sharing IRQ 11 with 0000:00:01.1
PCI: Sharing IRQ 11 with 0000:00:01.2
eth0: RealTek RTL8139 at 0x1000, 00:11:9e:c0:0a:e5, IRQ 11
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: Can't read CTR while initializing i8042.
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
RAMDISK: cramfs filesystem found at block 0
Time: tsc clocksource has been installed.
RAMDISK: Loading 4216KiB [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/


On 6/20/07, Marc Jones <marc.jones at amd.com> wrote:
>
>
>
> Otávio Alcântara wrote:
> > Thanks for the help. But I have another doubt, I'm not getting video
> > working even after the linux kernel boots. What do I do to change the
> > console to video? I've configured Filo to use video console, but the
> > stream goes only to serial interface.
> >
> > Regards,
> >
> > Otávio Alcântara
> >
>
> Otávio,
> Correct, you can't get graphics until a driver is loaded. For a
> test/debug setup that uses the filo menu will only be visable serial.
> Please see this link for the Geode LX framebuffer support.
> http://thread.gmane.org/gmane.linux.fbdev.devel/10339
>
> Marc
>
>
>
>
>
> > On 6/20/07, *Marc Jones* <marc.jones at amd.com
> > <mailto:marc.jones at amd.com>> wrote:
> >
> >
> >
> >     Otávio Alcântara wrote:
> >      > Hello to all,
> >      >
> >      >           I'm porting a linuxbios v2 version for a board ref des
> >      > LXUVCRDK (http://www.amd.com/geodelxuvcrdk
> >     <http://www.amd.com/geodelxuvcrdk>) based on norwich board. I've
> >      > already got to boot linux from HD, but it seems to halt in some
> point
> >      > (see log below captured from serial). Although,  I'm using VSA
> >      > (lx_vsa.36k.bin) and I got no output from video VGA.
> >      >           I'd like some help for setting up the PIRQ table and
> >     for VGA
> >      > setup.
> >      >
> >      > PS: The schematics for this board are publicly available from AMD
> >      > Embedded Developer Web Site.
> >      >
> >      > Thanks,
> >      >
> >      > --
> >      > Otávio Alcântara
> >      > "I'll never cross to the Dark Side."
> >      >
> >      >
> >      >
> >
> >     I took a quick look at the schematics and I think that this is what
> the
> >     PIRQ table should look like.
> >
> >     /* If you change the number of entries, change the IRQ_SLOT_COUNT
> >     above! */
> >     /* bus, dev|fn,           {link, bitmap},      {link, bitmap},
> >     {link, bitmap},     {link, bitmap},     slot, rfu */
> >     {0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00,
> >     0x00}, {0x00, 0x00}}, 0x0, 0x0},        /* cpu */
> >     {0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB},
> >     {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0},     /* chipset
> */
> >     {0x00, (0x0D << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00}, {0x00,
> >     0x00}, {0x00, 0x00}}, 0x0, 0x0},        /* ethernet */
> >
> >     Make sure to change IRQ_SLOT_COUNT in the mainboard Options.lb
> >     <http://Options.lb>
> >
> >     As Jordan pointed out, you should use the Linux framebuffer and X
> >     drivers instead of VGA. That means that you should also set
> >     CONFIG_CONSOLE_VGA=0 and CONFIG_PCI_ROM_RUN=0 in Options.lb
> >     <http://Options.lb>
> >
> >
> >     It also looks like there is something funny going on with the
> >     Config.lb <http://Config.lb>.
> >     Try using the norwich one without modifications.
> >
> >      > cs5536: southbridge_init: enable_ide_nand_flash is 36
> >     If you want to boot from IDE enable_ide_nand_flash should be 0
> >
> >      > Disabling VPCI device: 0x0000106C
> >      > Disabling VPCI device: 0x00001075
> >      > Disabling VPCI device: 0x0000107E
> >      > Disabling VPCI device: 0x00001087
> >      > Disabling VPCI device: 0x00001090
> >      > Disabling VPCI device: 0x00001099
> >      > Disabling VPCI device: 0x000010A2
> >      > Disabling VPCI device: 0x000010AB
> >     This is a very strange list.
> >
> >
> >     I don't have one of these boards so when you get it working please
> >     submit a patch!
> >     Let me know if there is anything else I can do to help
> >
> >     Marc
> >
> >
> >
> >      >
> >      > LinuxBIOS-2.0.0.0Fallback Qua Jun 20 07:45:43 BRT 2007
> starting...
> >      > _MSR GLCP_SYS_RSTPLL (4c000014) value is: 00000498:00001820
> >      > Configuring PLL
> >      >
> >      >
> >      > LinuxBIOS-2.0.0.0Fallback Qua Jun 20 07:45:43 BRT 2007
> starting...
> >      > _MSR GLCP_SYS_RSTPLL (4c000014) value is: 00000498:07de0020
> >      > Done cpuRegInit
> >      > SMBUS READ ERROR:03 device:a2
> >      > Ram1.00
> >      > Ram2.00
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > SMBUS READ ERROR:03 device:a2
> >      > Ram3
> >      > DRAM controller init done.
> >      > RAM DLL lock
> >      > Ram4
> >      > Copying LinuxBIOS to ram.
> >      > Jumping to LinuxBIOS.
> >      > LinuxBIOS-2.0.0.0Fallback Qua Jun 20 08:56:35 BRT 2007 booting...
> >      > clocks_per_usec: 432
> >      > Enumerating buses...
> >      >  >> Entering northbridge.c: pci_domain_enable
> >      > Enter northbridge_init_early
> >      > writeglmsr: MSR 0x10000020, val 0x20000000:0x000fff80
> >      > writeglmsr: MSR 0x10000021, val 0x20000000:0x080fffe0
> >      > writeglmsr: MSR 0x1000002c, val 0x20000000:0x00000003
> >      > sizeram: _MSR MC_CF07_DATA: 10076112:00004840
> >      > sizeram: sizem 0x100MB
> >      > SysmemInit: enable for 256MBytes
> >      > usable RAM: 268304383 bytes
> >      > SysmemInit: MSR 0x10000028, val 0x2000000f:0xfdf00100
> >      > sizeram: _MSR MC_CF07_DATA: 10076112:00004840
> >      > sizeram: sizem 0x100MB
> >      > SMMGL0Init: 268304384 bytes
> >      > SMMGL0Init: offset is 0x80400000
> >      > SMMGL0Init: MSR 0x10000026, val 0x28fbe080:0x400fffe0
> >      > writeglmsr: MSR 0x10000080, val 0x00000000:0x00000003
> >      > writeglmsr: MSR 0x40000020, val 0x20000000:0x000fff80
> >      > writeglmsr: MSR 0x40000021, val 0x20000000:0x080fffe0
> >      > writeglmsr: MSR 0x4000002e, val 0x20000000:0x00000003
> >      > sizeram: _MSR MC_CF07_DATA: 10076112:00004840
> >      > sizeram: sizem 0x100MB
> >      > SysmemInit: enable for 256MBytes
> >      > usable RAM: 268304383 bytes
> >      > SysmemInit: MSR 0x4000002a, val 0x2000000f:0xfdf00100
> >      > SMMGL1Init:
> >      > SMMGL1Init: MSR 0x40000023, val 0x20000080:0x400fffe0
> >      > writeglmsr: MSR 0x40000080, val 0x00000000:0x00000001
> >      > writeglmsr: MSR 0x400000e3, val 0x60000000:0x033000f0
> >      > CPU_RCONF_DEFAULT (1808): 0x25FFFC02:0x10FFDF00
> >      > CPU_RCONF_BYPASS (180A): 0x00000000 : 0x00000000
> >      > L2 cache enabled
> >      > Enabling cache
> >      > GLPCI R1: system msr.lo 0x00100130 msr.hi 0x0ffdf000
> >      > GLPCI R2: system msr.lo 0x80400120 msr.hi 0x8041f000
> >      > Exit northbridge_init_early
> >      > Done cpubug fixes
> >      > Not Doing ChipsetFlashSetup()
> >      > <<<WARNING>>> Graphics init...
> >      >  <<WARNING!!!>>> VRC_VG value: 0xffff
> >      > Before VSA:
> >      > do_vsmbios
> >      > buf ilen 35441 olen60466
> >      > buf 00060000 *buf 186 buf[256k] 0
> >      > buf[0x20] signature is b0:10:e6:80
> >      > Call real_mode_switch_call_vsm
> >      > biosint: INT# 0x15
> >      > biosint: eax 0xbea7 ebx 0x4e53 ecx 0x10000026 edx 0x10000028
> >      > biosint: ebp 0x15ed4 esp 0xff0 edi 0x8a71 esi 0x38
> >      > biosint:  ip 0x5b3   cs 0x6000  flags 0x46
> >      > biosint: gs 0x0 fs 0x0 ds 0x6000 es 0x0
> >      > handleint21, eax 0xbea7
> >      > biosint: INT# 0x15
> >      > biosint: eax 0xbea4 ebx 0x4e53 ecx 0x10000026 edx 0x10000028
> >      > biosint: ebp 0x15ed4 esp 0xfee edi 0x8a71 esi 0x38
> >      > biosint:  ip 0x5c1   cs 0x6000  flags 0x46
> >      > biosint: gs 0x0 fs 0x0 ds 0x6000 es 0x0
> >      > handleint21, eax 0xbea4
> >      > do_vsmbios: VSA2 VR signature verified
> >      > After VSA:
> >      > <<<WARNING>>> Graphics init...
> >      >  <<WARNING!!!>>> VRC_VG value: 0x2808
> >      > Finding PCI configuration type.
> >      > PCI: Using configuration type 1
> >      > PCI_DOMAIN: 0000 enabled
> >      > APIC_CLUSTER: 0 enabled
> >      > PCI: pci_scan_bus for bus 00
> >      > PCI: 00:01.0 [1022/2080] enabled
> >      > PCI: 00:01.1 [1022/2081] enabled
> >      > PCI: 00:01.2 [1022/2082] enabled
> >      > PCI: 00:0d.0 [10ec/8139] enabled
> >      > PCI: 00:0f.0 [1022/2090] enabled
> >      > PCI: 00:0f.2 [1022/209a] enabled
> >      > PCI: 00: 0f.3 [1022/2093] enabled
> >      > PCI: 00:0f.4 [1022/2094] enabled
> >      > PCI: 00:0f.5 [1022/2095] enabled
> >      > PCI: 00: 0f.6 [1022/2096] enabled
> >      > PCI: 00:0f.7 [1022/2097] enabled
> >      > PCI: pci_scan_bus returning with max=000
> >      > done
> >      > Allocating resources...
> >      > Reading resources...
> >      > Done reading resources.
> >      > Setting resources...
> >      > PCI: 00: 01.1 10 <- [0x00fd000000 - 0x00fdffffff] mem
> >      > PCI: 00:01.1 14 <- [0x00fe000000 - 0x00fe003fff] mem
> >      > PCI: 00:01.1 18 <- [0x00fe004000 - 0x00fe007fff] mem
> >      > PCI: 00:01.1 1c <- [0x00fe008000 - 0x00fe00bfff] mem
> >      > PCI: 00:01.1 20 <- [0x00fe00c000 - 0x00fe00ffff] mem
> >      > PCI: 00:01.2 10 <- [0x00fe010000 - 0x00fe013fff] mem
> >      > PCI: 00:0d.0 10 <- [0x0000001000 - 0x00000010ff] io
> >      > PCI: 00:0d.0 14 <- [0x00fe019000 - 0x00fe0190ff] mem
> >      > PCI: 00:0f.0 10 <- [0x0000001cb0 - 0x0000001cb7] io
> >      > PCI: 00:0f.0 14 <- [0x0000001400 - 0x00000014ff] io
> >      > PCI: 00:0f.0 18 <- [0x0000001c00 - 0x0000001c3f] io
> >      > PCI: 00:0f.0 1c <- [0x0000001c80 - 0x0000001c9f] io
> >      > PCI: 00:0f.0 20 <- [0x0000001800 - 0x000000187f] io
> >      > PCI: 00:0f.0 24 <- [0x0000001c40 - 0x0000001c7f] io
> >      > PCI: 00:0f.2 20 <- [0x0000001ca0 - 0x0000001caf] io
> >      > PCI: 00:0f.3 10 <- [0x0000001880 - 0x00000018ff] io
> >      > PCI: 00:0f.4 10 <- [0x00fe016000 - 0x00fe016fff] mem
> >      > PCI: 00:0f.5 10 <- [0x00fe017000 - 0x00fe017fff] mem
> >      > PCI: 00:0f.6 10 <- [0x00fe014000 - 0x00fe015fff] mem
> >      > PCI: 00:0f.7 10 <- [0x00fe018000 - 0x00fe018fff] mem
> >      > Done setting resources.
> >      > Done allocating resources.
> >      > Enabling resources...
> >      > PCI: 00:01.0 cmd <- 145
> >      > PCI: 00:01.1 subsystem <- 00/00
> >      > PCI: 00:01.1 cmd <- 142
> >      > PCI: 00:01.2 cmd <- 142
> >      > PCI: 00: 0d.0 cmd <- 143
> >      > cs5536: cs5536_pci_dev_enable_resources()
> >      > PCI: 00:0f.0 cmd <- 149
> >      > PCI: 00:0f.2 cmd <- 141
> >      > PCI: 00:0f.3 cmd <- 141
> >      > PCI: 00:0f.4 cmd <- 142
> >      > PCI: 00: 0f.5 cmd <- 142
> >      > PCI: 00: 0f.6 cmd <- 142
> >      > PCI: 00:0f.7 cmd <- 142
> >      > done.
> >      > Initializing devices...
> >      > Root Device init
> >      > Norwich ENTER init
> >      > Norwich EXIT init
> >      > PCI: 00: 01.0 init
> >      > PCI: 00:01.1 init
> >      > APIC_CLUSTER: 0 init
> >      > Initializing CPU #0
> >      > CPU: vendor AMD device 5a2
> >      > CPU: family 05, model 0a, stepping 02
> >      > model_lx_init
> >      > Enabling cache
> >      > A20 (0x92): 2
> >      > A20 (0x92): 2
> >      > CPU model_lx_init DONE
> >      > CPU #0 Initialized
> >      > PCI: 00:01.2 init
> >      > PCI: 00: 0d.0 init
> >      > PCI: 00:0f.0 init
> >      > cs5536: southbridge_init
> >      > RTC Init
> >      > rct_init finished
> >      > cs5536: southbridge_init: enable_ide_nand_flash is 36
> >      > Disabling VPCI device: 0x0000106C
> >      > Disabling VPCI device: 0x00001075
> >      > Disabling VPCI device: 0x0000107E
> >      > Disabling VPCI device: 0x00001087
> >      > Disabling VPCI device: 0x00001090
> >      > Disabling VPCI device: 0x00001099
> >      > Disabling VPCI device: 0x000010A2
> >      > Disabling VPCI device: 0x000010AB
> >      > PCI: 00:0f.2 init
> >      > PCI: 00:0f.3 init
> >      > PCI: 00:0f.4 init
> >      > PCI: 00:0f.5 init
> >      > PCI: 00:0f.6 init
> >      > PCI: 00:0f.7 init
> >      > Devices initialized
> >      > Copying IRQ routing tables to 0xf0000...done.
> >      > Verifing copy of IRQ routing tables at 0xf0000...done
> >      > Checking IRQ routing table consistency...
> >      > check_pirq_routing_table() - irq_routing_table located at:
> 0x000f0000
> >      > /home/otavio/LinuxBIOSv2/src/arch/i386/boot/pirq_routing.c:
> >      > 36:check_pirq_routing_table() - checksum is: 0x00 but should be:
> >     0xfd
> >      > done.
> >      > write_pirq_routing_table(8000785C, BAAA)
> >      > PIR Entry 0 Dev/Fn: 8 Slot: 0
> >      > INT: A bitmap: 400 PIRQ: 10
> >      > INT: B bitmap: 0 PIRQ: 0
> >      > INT: C bitmap: 0 PIRQ: 0
> >      > INT: D bitmap: 0 PIRQ: 0
> >      > Assigning IRQ 10 to 0: 1.1
> >      >   Readback = 10
> >      > Assigning IRQ 10 to 0:1.2
> >      >   Readback = 10
> >      > PIR Entry 1 Dev/Fn: 78 Slot: 0
> >      > INT: A bitmap: 400 PIRQ: 10
> >      > INT: B bitmap: 400 PIRQ: 10
> >      > INT: C bitmap: 400 PIRQ: 10
> >      > INT: D bitmap: 800 PIRQ: 11
> >      > Assigning IRQ 10 to 0:f.3
> >      >   Readback = 10
> >      > Assigning IRQ 11 to 0:f.4
> >      >   Readback = 11
> >      > Assigning IRQ 11 to 0:f.5
> >      >   Readback = 11
> >      > PIR Entry 2 Dev/Fn: 68 Slot: 1
> >      > INT: A bitmap: 400 PIRQ: 10
> >      > INT: B bitmap: 400 PIRQ: 10
> >      > INT: C bitmap: 800 PIRQ: 11
> >      > INT: D bitmap: 400 PIRQ: 10
> >      > Assigning IRQ 10 to 0: d.0
> >      >   Readback = 10
> >      > PIR Entry 3 Dev/Fn: 70 Slot: 2
> >      > INT: A bitmap: 400 PIRQ: 10
> >      > INT: B bitmap: 800 PIRQ: 11
> >      > INT: C bitmap: 400 PIRQ: 10
> >      > INT: D bitmap: 400 PIRQ: 10
> >      > PIR Entry 4 Dev/Fn: 58 Slot: 3
> >      > INT: A bitmap: 800 PIRQ: 11
> >      > INT: B bitmap: 400 PIRQ: 10
> >      > INT: C bitmap: 400 PIRQ: 10
> >      > INT: D bitmap: 400 PIRQ: 10
> >      > PIR Entry 5 Dev/Fn: 60 Slot: 4
> >      > INT: A bitmap: 400 PIRQ: 10
> >      > INT: B bitmap: 400 PIRQ: 10
> >      > INT: C bitmap: 400 PIRQ: 10
> >      > INT: D bitmap: 800 PIRQ: 11
> >      > Moving GDT to 0x500...ok
> >      > Adjust low_table_end from 0x00000530 to 0x00001000
> >      > Adjust rom_table_end from 0x000f0400 to 0x00100000
> >      > Wrote linuxbios table at: 00000530 - 000006c4  checksum fba9
> >      >
> >      > Welcome to elfboot, the open sourced starter.
> >      > January 2002, Eric Biederman.
> >      > Version 1.3
> >      >
> >      > rom_stream: 0xfff89000 - 0xfffeffff
> >      > Found ELF candidate at offset 0
> >      > header_offset is 0
> >      > Try to load at offset 0x0
> >      > New segment addr 0x100000 size 0x306e0 offset 0xc0 filesize
> 0xb248
> >      > (cleaned up) New segment addr 0x100000 size 0x306e0 offset 0xc0
> >     filesize
> >      > 0xb248
> >      > New segment addr 0x1306e0 size 0x48 offset 0xb320 filesize 0x48
> >      > (cleaned up) New segment addr 0x1306e0 size 0x48 offset 0xb320
> >     filesize 0x48
> >      > Dropping non PT_LOAD segment
> >      > Dropping non PT_LOAD segment
> >      > Loading Segment: addr: 0x0000000000100000 memsz:
> 0x00000000000306e0
> >      > filesz: 0x000000000000b248
> >      > Clearing Segment: addr: 0x000000000010b248 memsz:
> 0x0000000000025498
> >      > Loading Segment: addr: 0x00000000001306e0 memsz:
> 0x0000000000000048
> >      > filesz: 0x0000000000000048
> >      > Jumping to boot code at 0x108bdc
> >      > FILO version 0.5 (otavio at labdes15) Wed Jun 20 08:56:24 BRT 2007
> >      > collect_linuxbios_info: Searching for LinuxBIOS tables...
> >      > find_lb_table: Found canidate at: 00000530
> >      > find_lb_table: header checksum o.k.
> >      > find_lb_table: table checksum o.k.
> >      > find_lb_table: record count o.k.
> >      > collect_linuxbios_info: Found LinuxBIOS table at: 00000530
> >      > convert_memmap: 0x00000000000000 0x00000000001000 16
> >      > convert_memmap: 0x00000000001000 0x0000000009f000 1
> >      > convert_memmap: 0x000000000f0000 0x00000000010000 16
> >      > convert_memmap: 0x00000000100000 0x0000000f6e0000 1
> >      > Press <Enter> for default boot, or <Esc> for boot prompt... 2   1
> >      >  timed out
> >      > boot: hda1:/boot/vmlinuz root=/dev/hda1 initrd=/boot/initrd
> >      > console=tty0  console=ttyS0,115200
> >      > hda: LBA 40GB: ST340014A
> >      > Mounted ext2fs
> >      > Found Linux version 2.6.8-2-386
> >     (horms at tabatha.lab.ultramonkey.org
> >     <mailto:horms at tabatha.lab.ultramonkey.org>
> >      > <mailto:horms at tabatha.lab.ultramonkey.org
> >     <mailto:horms at tabatha.lab.ultramonkey.org>>) #1 Thu May 19 17:40:50
> JST
> >      > 2005 (protocol 0x203) (loadflags 0x1) bzImage.
> >      > init_linux_params: Setting up paramters at 0x90000
> >      > set_memory_size: 0000000000001000 - 00000000000a0000
> >      > set_memory_size: 0000000000100000 - 000000000f7e0000
> >      > set_memory_size: ramtop=0xf7e0000
> >      > set_memory_size: ext_mem_k=64512, alt_mem_k=252800
> >      > parse_command_line: original command line: "root=/dev/hda1
> >      > initrd=/boot/initrd console=tty0  console=ttyS0,115200"
> >      > parse_command_line: kernel command line at 0x91000
> >      > parse_command_line: initrd=/boot/initrd
> >      > parse_command_line: kernel command line (48 bytes):
> "root=/dev/hda1
> >      > console=tty0 console=ttyS0,115200"
> >      > load_linux_kernel: offset=0x1600 addr=0x100000 size=0x10a8cb
> >      > Loading kernel... ok
> >      > load_initrd: start=0xf391000 end=0xf7af000
> >      > Loading initrd... ok
> >      > start_linux: eip=0x100000
> >      > Jumping to entry point...
> >      > Linux version 2.6.8-2-386 (horms at tabatha.lab.ultramonkey.org
> >     <mailto:horms at tabatha.lab.ultramonkey.org>
> >      > <mailto:horms at tabatha.lab.ultramonkey.org
> >     <mailto:horms at tabatha.lab.ultramonkey.org>>) (gcc version 3.3.5(Debian
> >      > 1:3.3.5-12)) #1 Thu May 19 17:40:50 JST 2005
> >      >
> >      > BIOS-provided physical RAM map:
> >      >
> >      >  BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
> >      >
> >      >  BIOS-e820: 0000000000100000 - 000000000f7e0000 (usable)
> >      >
> >      > 247MB LOWMEM available.
> >      >
> >      > DMI not present.
> >      >
> >      > ACPI: Unable to locate RSDP
> >      >
> >      > Built 1 zonelists
> >      >
> >      > Kernel command line: root=/dev/hda1 console=tty0
> console=ttyS0,115200
> >      >
> >      > No local APIC present or hardware disabled
> >      >
> >      > Initializing CPU#0
> >      >
> >      > PID hash table entries: 1024 (order 10: 8192 bytes)
> >      >
> >      > Detected 431.857 MHz processor.
> >      >
> >      > Using tsc for high-res timesource
> >      >
> >      > Console: colour dummy device 80x25
> >      >
> >      > Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> >      >
> >      > Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> >      >
> >      > Memory: 244168k/253824k available (1336k kernel code, 8916k
> reserved,
> >      > 732k data, 204k init, 0k highmem)
> >      >
> >      > Checking if this processor honours the WP bit even in supervisor
> >     mode...
> >      > Ok.
> >      >
> >      > Calibrating delay loop... 845.82 BogoMIPS
> >      >
> >      > Security Scaffold v1.0.0 initialized
> >      >
> >      > Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> >      >
> >      > CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
> >      >
> >      > CPU: L2 Cache: 128K (32 bytes/line)
> >      >
> >      > CPU: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
> >      >
> >      > Checking 'hlt' instruction... OK.
> >      >
> >      > Checking for popad bug... OK.
> >      >
> >      > checking if image is initramfs...it isn't (ungzip failed); looks
> >     like an
> >      > initrd
> >      >
> >      > Freeing initrd memory: 4216k freed
> >      >
> >      > NET: Registered protocol family 16
> >      >
> >      > EISA bus registered
> >      >
> >      > PCI: Using configuration type 1
> >      >
> >      > mtrr: v2.0 (20020519)
> >      >
> >      > ACPI: Subsystem revision 20040326
> >      >
> >      > ACPI: Interpreter disabled.
> >      >
> >      > Linux Plug and Play Support v0.97 (c) Adam Belay
> >      >
> >      > PnPBIOS: Scanning system for PnP BIOS support...
> >      >
> >      > PnPBIOS: PnP BIOS support was not detected.
> >      >
> >      > PCI: Probing PCI hardware
> >      >
> >      > PCI: Probing PCI hardware (bus 00)
> >      >
> >      > PCI: Using IRQ router default [1022/2090] at 0000:00:0f.0
> >      >
> >      > VFS: Disk quotas dquot_6.5.1
> >      >
> >      > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> >      >
> >      > devfs: 2004-01-31 Richard Gooch ( rgooch at atnf.csiro.au
> >     <mailto:rgooch at atnf.csiro.au>
> >      > <mailto:rgooch at atnf.csiro.au <mailto:rgooch at atnf.csiro.au>>)
> >      >
> >      > devfs: boot_options: 0x0
> >      >
> >      > Initializing Cryptographic API
> >      >
> >      > isapnp: Scanning for PnP cards...
> >      >
> >      > isapnp: No Plug & Play device found
> >      >
> >      > Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing
> >     enabled
> >      >
> >      > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> >      >
> >      > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
> blocksize
> >      >
> >      > i8042.c : Can't read CTR while initializing i8042.
> >      >
> >      > EISA: Probing bus 0 at eisa0
> >      >
> >      > Cannot allocate resource for EISA slot 1
> >      >
> >      > EISA: Detected 0 cards.
> >      >
> >      > NET: Registered protocol family 2
> >      >
> >      > IP: routing cache hash table of 2048 buckets, 16Kbytes
> >      >
> >      > TCP: Hash tables configured (established 16384 bind 32768)
> >      >
> >      > NET: Registered protocol family 8
> >      >
> >      > NET: Registered protocol family 20
> >      >
> >      > RAMDISK: cramfs filesystem found at block 0
> >      >
> >      > RAMDISK: Loading 4216 blocks [1 disk] into ram disk... | / - \ |
> >     / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -
> >     \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ |
> >     / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -
> >     \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ |
> >     / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -
> >     \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ |
> >     / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / - \ | / -
> >     \ | / - \ | / - \ | / - \ | / - \ | / - \ done.
> >      >
> >      >
> >      > VFS: Mounted root (cramfs filesystem) readonly.
> >      >
> >      > Freeing unused kernel memory: 204k freed
> >      >
> >      > vesafb: probe of vesafb0 failed with error -6
> >      >
> >      > NET: Registered protocol family 1
> >      >
> >      > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> >      >
> >      > ide: Assuming 33MHz system bus speed for PIO modes; override with
> >     idebus=xx
> >      >
> >      > hda: ST340014A, ATA DISK drive
> >      >
> >      > Using anticipatory io scheduler
> >      >
> >      > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> >      >
> >      > hda: max request size: 128KiB
> >      >
> >      > hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
> >      >
> >      >  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
> >      >
> >      >
> >
> >     --
> >     Marc Jones
> >     Senior Software Engineer
> >     (970) 226-9684 Office
> >     mailto:Marc.Jones at amd.com <mailto:Marc.Jones at amd.com>
> >     http://www.amd.com/embeddedprocessors
> >
> >
> >
> >
> >
> > --
> > Otávio Alcântara
> > "I'll never cross to the Dark Side."
> >
>
> --
> Marc Jones
> Senior Software Engineer
> (970) 226-9684 Office
> mailto:Marc.Jones at amd.com
> http://www.amd.com/embeddedprocessors
>
>
>


-- 
Otávio Alcântara
"I'll never cross to the Dark Side."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070713/37b2978a/attachment.html>


More information about the coreboot mailing list