[LinuxBIOS] trying to boot Gigabyte M575SLI
Andreas B. Mundt
andi.mundt at web.de
Tue Jun 5 20:19:26 CEST 2007
So, here now the booting with standard filo (just the delay(1) patched)
which works fine and the completely patched filo (same Config).
Unfortunately the initrd is not found in the later case :(
Thanks,
Andi
standard filo:
=============================
LinuxBIOS-2.0.0_m57sli_Fallback Tue Jun 5 19:38:44 CEST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 3107121207110202
set fid failed for apicid =00
end msr fid, vid 3107120707110210
mcp55_num:01
ht reset -
LinuxBIOS-2.0.0_m57sli_Fallback Tue Jun 5 19:38:44 CEST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 3107120707110210
set fid failed for apicid =00
end msr fid, vid 3107120707110210
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
333Mhz
Interleaved
RAM: 0x00400000 KB
Ram3
dimm_mask = 00000033
x4_mask = 00000000
x16_mask = 00000000
single_rank_mask = 00000000
ODC = 00111322
Addr Timing= 002b2220
Initializing memory: done
RAM: 0x00500000 KB
Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 3, base: 2048MB, range: 1024MB, type WB
set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=13 done
set DQS timing:DQSPos: 00 done
set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=34 done
Total DQS Training : tsc [00]=00000000459aab84
Total DQS Training : tsc [01]=000000004753ffde
Total DQS Training : tsc [02]=000000009cc8465f
Total DQS Training : tsc [03]=000000009f127ae6
Ram4
v_esp=000cee78
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to RAM.
src=fffdf000
dst=00100000
linxbios_ram.nrv2b length = 0000d634
linxbios_ram.bin length = 00022510
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0_m57sli_Fallback Tue Jun 5 19:38:44 CEST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:01.0 [10de/0360] enabled
PCI: 00:01.1 [10de/0368] enabled
PCI: 00:01.2 [10de/036a] enabled
PCI: 00:01.3 [10de/036b] enabled
PCI: 00:02.0 [10de/036c] enabled
PCI: 00:02.1 [10de/036d] enabled
PCI: 00:04.0 [10de/036e] enabled
PCI: 00:05.0 [10de/037f] enabled
PCI: 00:05.1 [10de/037f] enabled
PCI: 00:05.2 [10de/037f] enabled
PCI: 00:06.0 [10de/0370] enabled
PCI: 00:06.1 [10de/0371] enabled
PCI: 00:08.0 [10de/0373] enabled
PCI: 00:0a.0 [10de/0376] enabled
PCI: 00:0b.0 [10de/0374] enabled
PCI: 00:0c.0 [10de/0374] enabled
PCI: 00:0d.0 [10de/0378] enabled
PCI: 00:0e.0 [10de/0375] enabled
PCI: 00:0f.0 [10de/0377] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 disabled
PNP: 002e.4 enabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
PCI: pci_scan_bus for bus 01
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: 07:00.0 [10de/0392] enabled
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
done
Allocating resources...
Reading resources...
PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io
PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem
PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
Done reading resources.
Allocating VGA resource PCI: 07:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0f.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f61fffff] mem <node 0 link 0>
PCI: 00:01.0 14 <- [0x00f6144000 - 0x00f6144fff] mem
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.4 60 <- [0x0000000290 - 0x0000000297] io
PNP: 002e.4 62 <- [0x0000000230 - 0x0000000237] io
PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io
PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io
PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io
PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:01.3 10 <- [0x00f6100000 - 0x00f613ffff] mem
PCI: 00:02.0 10 <- [0x00f6145000 - 0x00f6145fff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io
PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io
PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io
PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io
PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io
PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io
PCI: 00:05.0 24 <- [0x00f6146000 - 0x00f6146fff] mem
PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io
PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io
PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io
PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io
PCI: 00:05.1 24 <- [0x00f6147000 - 0x00f6147fff] mem
PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io
PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io
PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io
PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io
PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io
PCI: 00:05.2 24 <- [0x00f6148000 - 0x00f6148fff] mem
PCI: 00:06.1 10 <- [0x00f6140000 - 0x00f6143fff] mem
PCI: 00:08.0 10 <- [0x00f6149000 - 0x00f6149fff] mem
PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io
PCI: 00:08.0 18 <- [0x00f614b000 - 0x00f614b0ff] mem
PCI: 00:08.0 1c <- [0x00f614c000 - 0x00f614c00f] mem
PCI: 00:0f.0 1c <- [0x0000001000 - 0x0000001fff] bus 07 io
PCI: 00:0f.0 24 <- [0x00e0000000 - 0x00efffffff] bus 07 prefmem
PCI: 00:0f.0 20 <- [0x00f4000000 - 0x00f60fffff] bus 07 mem
PCI: 07:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] mem
PCI: 07:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64
PCI: 07:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] mem64
PCI: 07:00.0 24 <- [0x0000001000 - 0x000000107f] io
PCI: 07:00.0 30 <- [0x00f6000000 - 0x00f601ffff] romem
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:00.0 subsystem <- 1022/2b80
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 subsystem <- 1022/2b80
PCI: 00:01.0 cmd <- 14f
mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
mcp55 lpc decode:PNP: 002e.4, base=0x00000290, end=0x00000297
mcp55 lpc decode:PNP: 002e.4, base=0x00000230, end=0x00000237
mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
PCI: 00:01.1 subsystem <- 1022/2b80
PCI: 00:01.1 cmd <- 141
PCI: 00:01.2 cmd <- 540
PCI: 00:01.3 cmd <- 142
PCI: 00:02.0 subsystem <- 1022/2b80
PCI: 00:02.0 cmd <- 142
PCI: 00:02.1 subsystem <- 1022/2b80
PCI: 00:02.1 cmd <- 142
PCI: 00:04.0 subsystem <- 1022/2b80
PCI: 00:04.0 cmd <- 141
PCI: 00:05.0 subsystem <- 1022/2b80
PCI: 00:05.0 cmd <- 143
PCI: 00:05.1 subsystem <- 1022/2b80
PCI: 00:05.1 cmd <- 143
PCI: 00:05.2 subsystem <- 1022/2b80
PCI: 00:05.2 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0a03
PCI: 00:06.0 cmd <- 144
PCI: 00:06.1 subsystem <- 1022/2b80
PCI: 00:06.1 cmd <- 142
PCI: 00:08.0 subsystem <- 1022/2b80
PCI: 00:08.0 cmd <- 143
PCI: 00:0a.0 bridge ctrl <- 0003
PCI: 00:0a.0 cmd <- 140
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 140
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 140
PCI: 00:0e.0 bridge ctrl <- 0003
PCI: 00:0e.0 cmd <- 140
PCI: 00:0f.0 bridge ctrl <- 000b
PCI: 00:0f.0 cmd <- 147
PCI: 07:00.0 cmd <- 143
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b
Initializing CPU #0
CPU: vendor AMD device 60fb1
CPU: family 0f, model 6b, stepping 01
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 60fb1
CPU: family 0f, model 6b, stepping 01
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.4 init
FAN_CTL: reg = 0x02a9, read value = 0x50
FAN_CTL: reg = 0x02a9, writing value = 0xd7
PNP: 002e.5 init
PNP: 002e.6 init
PCI: 00:01.1 init
PCI: 00:02.1 init
PCI: 00:04.0 init
IDE0
PCI: 00:05.0 init
SATA S SATA P
PCI: 00:05.1 init
SATA S SATA P
PCI: 00:05.2 init
SATA S SATA P
PCI: 00:06.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:06.1 init
base = f6140000
codec_mask = 01
codec viddid: 10ec0883
No verb!
PCI: 00:08.0 init
MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:0f.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:01.2 init
PCI: 00:01.3 init
PCI: 07:00.0 init
rom address for PCI: 07:00.0 = f6000000
copying VGA ROM Image from 0xf6000000 to 0xc0000, 0xf600 bytes
entering emulator
halt_sys: file /home/andi/freeBIOS/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 00000274
Moving GDT to 0x500...ok
Adjust low_table_end from 0x00000530 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote linuxbios table at: 00000530 - 00000dd4 checksum 5c17
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
New segment addr 0x100000 size 0x30700 offset 0xc0 filesize 0xb268
(cleaned up) New segment addr 0x100000 size 0x30700 offset 0xc0 filesize 0xb268
New segment addr 0x130700 size 0x48 offset 0xb340 filesize 0x48
(cleaned up) New segment addr 0x130700 size 0x48 offset 0xb340 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x00000000bff80000 memsz: 0x0000000000030700 filesz: 0x000000000000b268
Clearing Segment: addr: 0x00000000bff8b268 memsz: 0x0000000000025498
Loading Segment: addr: 0x00000000bffb0700 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Jumping to boot code at 0x108e64
FILO version 0.5 (andi at flashgordon) Tue Jun 5 19:36:25 CEST 2007
setup_timers: CPU 2400 MHz
Press <Enter> for default boot, or <Esc> for boot prompt... 5 4 3 2 1 timed out
boot: hde5:/vmlinuz initrd=hde5:/boot/initrd.img-2.6.21-1-amd64 root=/dev/sda2 ro console=ttyS0,115200
find_ide_controller: found PCI IDE controller 10de:037f prog_if=0x85
find_ide_controller: primary channel: native PCI mode
find_ide_controller: cmd_base=0x3000 ctrl_base=0x3070
ide_software_reset: Waiting for ide2 to become ready for reset... ok
init_drive: Testing for hde
init_drive: Probing for hde
init_drive: LBA mode, sectors=268435455
init_drive: LBA48 mode, sectors=488395055
init_drive: Init device params... ok
hde: LBA48 250GB: SAMSUNG SP2504C
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
Mounted ext2fs
Found Linux version 2.6.21-1-amd64 (unknown at Debian) #1 SMP Fri May 18 23:28:21 CEST 2007 bzImage.
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
Linux version 2.6.21-1-amd64 (Debian 2.6.21-2) (waldi at debian.org) (gcc version 4.1.3 20070514 (prerelease) (Debian 4.1.2-7)) #1 SMP Fri May 18 23:28:21 CEST 2007
Command line: root=/dev/sda2 ro console=ttyS0,115200
BIOS-provided physical RAM map:
BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable)
BIOS-e820: 0000000000100000 - 00000000c0000000 (usable)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
end_pfn_map = 1310720
DMI not present or invalid.
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 0000000140000000
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-0000000140000000
Zone PFN ranges:
DMA 1 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1310720
early_node_map[4] active PFN ranges
0: 1 -> 160
0: 192 -> 240
0: 256 -> 786432
0: 1048576 -> 1310720
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Intel MultiProcessor Specification v1.4
MPTABLE: OEM ID: GIGABYTE MPTABLE: Product ID: M57SLI MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
I/O APIC #2 at 0xF6144000.
Setting APIC routing to physical flat
Processors: 2
Nosave address range: 00000000000a0000 - 00000000000c0000
Nosave address range: 00000000000f0000 - 0000000000100000
Nosave address range: 00000000c0000000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:40000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37504 bytes of per cpu data
Built 1 zonelists. Total pages: 1029631
Kernel command line: root=/dev/sda2 ro console=ttyS0,115200
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Detected 2400.010 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ f0000000 size 64 MB
Memory: 4106608k/5242880k available (1975k kernel code, 87500k reserved, 931k data, 296k init)
Calibrating delay using timer specific routine.. 4803.89 BogoMIPS (lpj=9607797)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
ACPI Exception (tbxface-0618): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126]
ACPI: Unable to load the System Description Tables
Using local APIC timer interrupts.
result 12500064
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.35 BogoMIPS (lpj=9600704)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 01
Brought up 2 CPUs
migration_cost=203
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
PCI->APIC IRQ transform: 0000:00:01.1[A] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:01.3[B] -> IRQ 10
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 22
PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 20
PCI->APIC IRQ transform: 0000:00:05.1[B] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:05.2[C] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:06.1[B] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 22
PCI->APIC IRQ transform: 0000:07:00.0[A] -> IRQ 17
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f0000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0a.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0f.0
IO window: 1000-1fff
MEM window: f4000000-f60fffff
PREFETCH window: e0000000-efffffff
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5507k freed
audit: initializing netlink socket (disabled)
audit(1181065315.696:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 296k freed
Loading, please wait...
input: AT Translated Set 2 keyboard as /class/input/input0
Begin: Loading essential drivers... ...
Done.
Begin: Running /scripts/init-premount ...
FATAL: Error inserting fan (/lib/modules/2.6.21-1-amd64/kernel/drivers/acpi/fan.ko): No such device
WARNING: Error ithermal: Unknown symbol acpi_processor_set_thermal_limit
nserting processor (/lib/modules/2.6.21-1-amd64/kernel/drivers/acpi/processor.ko): No such device
FATAL: Error inserting thermal (/lib/modules/2.6.21-1-amd64/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg)
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf6145000
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf614a000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
NFORCE-MCP55: chipset revision 161
NFORCE-MCP55: not 100% native mode: will probe irqs later
NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0x2cc0-0x2cc7, BIOS settings: hda:pio, hdb:pio
hda: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive
usb 1-2: new low speed USB device using ohci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HID 1241:1166 as /class/input/input1
input: USB HID v1.00 Mouse [HID 1241:1166] on usb-0000:00:02.0-2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
SCSI subsystem initialized
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0
ata1: SATA max UDMA/133 cmd 0x0000000000013000 ctl 0x0000000000013072 bmdma 0x0000000000012cd0 irq 20
ata2: SATA max UDMA/133 cmd 0x0000000000013010 ctl 0x0000000000013082 bmdma 0x0000000000012cd8 irq 20
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
ata1.00: 488395055 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013017
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
ata3: SATA max UDMA/133 cmd 0x0000000000013020 ctl 0x0000000000013092 bmdma 0x0000000000012ce0 irq 23
ata4: SATA max UDMA/133 cmd 0x0000000000013030 ctl 0x00000000000130a2 bmdma 0x0000000000012ce8 irq 23
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013027
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013037
ata5: SATA max UDMA/133 cmd 0x0000000000013040 ctl 0x00000000000130b2 bmdma 0x0000000000012cf0 irq 21
ata6: SATA max UDMA/133 cmd 0x0000000000013050 ctl 0x00000000000130c2 bmdma 0x0000000000012cf8 irq 21
scsi4 : sata_nv
ata5: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013047
scsi5 : sata_nv
ata6: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0x0000000000013057
SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
sda: Write Protect is off
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 488395055 512-byte hdwr sectors (250058 MB)
sda: Write Protect is off
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 <<6>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
sda5 >
sd 0:0:0:0: Attached scsi disk sda
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount ...
kinit: name_to_dAttempting manual resume
ev_t(/dev/sda1) = sda1(8,1)
kinit: trying to resume from /dev/sda1
kinit: No resume image, doing normal boot...
Done.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2c40
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2c80
input: PC Speaker as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
done.
GActivating swap...Adding 7815580k swap on /dev/sda1. Priority:-1 extents:1 across:7815580k
done.
Checking root file system...fsck 1.40-WIP (14-Nov-2006)
/dev/sda2: clean, 170121/2443200 files, 1253024/EXT3 FS on sda2, 4883760 blocks
internal journal
done.
Setting the system clock..
Cleaning up ifupdown....
Loading kernel modules...loop: loaded (max 8 devices)
powernow_k8: Unknown symbol acpi_processor_notify_smm
powernow_k8: Unknown symbol acpi_processor_unregister_performance
powernow_k8: Unknown symbol acpi_processor_register_performance
it87: Found IT8716F chip at 0x290, revision 0
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
done.
Loading device-mapper supportdevice-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel at redhat.com
.
Checking file systems...fsck 1.40-WIP (14-Nov-2006)
/dev/sda3: clean, 14349/4889248 files, 238250/9765511 blocks
/dev/sda5: clean, 28584/1281696 files, 207922/2560351 blocks (check after next mount)
done.
Setting kernel variables...done.
Mounting local filesystems...kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Detecting hardware...Setting up networking....
Configuring network interfaces...done.
Starting portmap daemon....
Setting sensors limits: done.
Setting console screen modes and fonts.
RSetting console screen modes and fonts.
Setting up ALSA...done.
INIT: Entering runlevel: 2
Starting system log daemon....
Starting kernel log daemon....
Starting virtual private network daemon:.
Starting portmap daemon...Already running..
Starting HP Linux Printing and Imaging System: hpiod hpssd.
Starting BitTorrent tracker: disabled in /etc/default/bittorrent.
Starting console-log:Couldnt get a file descriptor referring to the console
E: openvt failed. headless system?...failed.
Starting Common Unix Printing System: cupsdlp: driver loaded but no devices found
ppdev: user-space parallel port driver
.
Starting system message bus: dbus.
Starting network connection manager: NetworkManager.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting network events dispatcher: NetworkManagerDispatcher.
Starting DirMngr: dirmngr.
Starting MTA: exim4.
Starting LAN Information Server: lisa.
Starting internet superserver: inetd.
Starting powernowd: required sysfs objects not found!
Read /usr/share/doc/powernowd/README.Debian for more information.
Starting OpenBSD Secure Shell server: sshdNET: Registered protocol family 10
lo: Disabled Privacy Extensions
.
Starting file alteration monitor: FAM.
Starting GNOME Display Manager: gdm.
Starting NFS common utilities: statd.
Starting NTP server: ntpd.
Starting DHCP D-Bus daemon: dhcdbdmtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
.
Starting Hardware abstraction layer: hald.
Starting anac(h)ronistic cron: anacron.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Not starting K Display Manager (kdm); it is not the default display manager.
mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
==============================
==============================
fast filo:
==============================
LinuxBIOS-2.0.0_m57sli_Fallback Tue Jun 5 19:47:22 CEST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 3107121207110202
set fid failed for apicid =00
end msr fid, vid 3107120707110210
mcp55_num:01
ht reset -
LinuxBIOS-2.0.0_m57sli_Fallback Tue Jun 5 19:47:22 CEST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 3107120707110210
set fid failed for apicid =00
end msr fid, vid 3107120707110210
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
333Mhz
Interleaved
RAM: 0x00400000 KB
Ram3
dimm_mask = 00000033
x4_mask = 00000000
x16_mask = 00000000
single_rank_mask = 00000000
ODC = 00111322
Addr Timing= 002b2220
Initializing memory: done
RAM: 0x00500000 KB
Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 3, base: 2048MB, range: 1024MB, type WB
set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=14 done
set DQS timing:DQSPos: 00 done
set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=34 done
Total DQS Training : tsc [00]=00000000459a078a
Total DQS Training : tsc [01]=000000004754aa55
Total DQS Training : tsc [02]=0000000094ce9001
Total DQS Training : tsc [03]=00000000971778f5
Ram4
v_esp=000cee78
testx = 5a5a5a5a
Copying data from cache to RAM -- switching to use RAM as stack... Done
testx = 5a5a5a5a
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to RAM.
src=fffdf000
dst=00100000
linxbios_ram.nrv2b length = 0000d634
linxbios_ram.bin length = 00022510
Jumping to LinuxBIOS.
LinuxBIOS-2.0.0_m57sli_Fallback Tue Jun 5 19:47:22 CEST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:01.0 [10de/0360] enabled
PCI: 00:01.1 [10de/0368] enabled
PCI: 00:01.2 [10de/036a] enabled
PCI: 00:01.3 [10de/036b] enabled
PCI: 00:02.0 [10de/036c] enabled
PCI: 00:02.1 [10de/036d] enabled
PCI: 00:04.0 [10de/036e] enabled
PCI: 00:05.0 [10de/037f] enabled
PCI: 00:05.1 [10de/037f] enabled
PCI: 00:05.2 [10de/037f] enabled
PCI: 00:06.0 [10de/0370] enabled
PCI: 00:06.1 [10de/0371] enabled
PCI: 00:08.0 [10de/0373] enabled
PCI: 00:0a.0 [10de/0376] enabled
PCI: 00:0b.0 [10de/0374] enabled
PCI: 00:0c.0 [10de/0374] enabled
PCI: 00:0d.0 [10de/0378] enabled
PCI: 00:0e.0 [10de/0375] enabled
PCI: 00:0f.0 [10de/0377] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 disabled
PNP: 002e.4 enabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
PCI: pci_scan_bus for bus 01
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: 07:00.0 [10de/0392] enabled
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
done
Allocating resources...
Reading resources...
PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
PCI: 00:0a.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 02 io
PCI: 00:0a.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 02 prefmem
PCI: 00:0a.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 02 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
Done reading resources.
Allocating VGA resource PCI: 07:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0f.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f61fffff] mem <node 0 link 0>
PCI: 00:01.0 14 <- [0x00f6144000 - 0x00f6144fff] mem
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.4 60 <- [0x0000000290 - 0x0000000297] io
PNP: 002e.4 62 <- [0x0000000230 - 0x0000000237] io
PNP: 002e.4 70 <- [0x0000000009 - 0x0000000009] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io
PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io
PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io
PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:01.3 10 <- [0x00f6100000 - 0x00f613ffff] mem
PCI: 00:02.0 10 <- [0x00f6145000 - 0x00f6145fff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io
PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io
PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io
PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io
PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io
PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io
PCI: 00:05.0 24 <- [0x00f6146000 - 0x00f6146fff] mem
PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io
PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io
PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io
PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io
PCI: 00:05.1 24 <- [0x00f6147000 - 0x00f6147fff] mem
PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io
PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io
PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io
PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io
PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io
PCI: 00:05.2 24 <- [0x00f6148000 - 0x00f6148fff] mem
PCI: 00:06.1 10 <- [0x00f6140000 - 0x00f6143fff] mem
PCI: 00:08.0 10 <- [0x00f6149000 - 0x00f6149fff] mem
PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io
PCI: 00:08.0 18 <- [0x00f614b000 - 0x00f614b0ff] mem
PCI: 00:08.0 1c <- [0x00f614c000 - 0x00f614c00f] mem
PCI: 00:0f.0 1c <- [0x0000001000 - 0x0000001fff] bus 07 io
PCI: 00:0f.0 24 <- [0x00e0000000 - 0x00efffffff] bus 07 prefmem
PCI: 00:0f.0 20 <- [0x00f4000000 - 0x00f60fffff] bus 07 mem
PCI: 07:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] mem
PCI: 07:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64
PCI: 07:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] mem64
PCI: 07:00.0 24 <- [0x0000001000 - 0x000000107f] io
PCI: 07:00.0 30 <- [0x00f6000000 - 0x00f601ffff] romem
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:00.0 subsystem <- 1022/2b80
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 subsystem <- 1022/2b80
PCI: 00:01.0 cmd <- 14f
mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
mcp55 lpc decode:PNP: 002e.4, base=0x00000290, end=0x00000297
mcp55 lpc decode:PNP: 002e.4, base=0x00000230, end=0x00000237
mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
PCI: 00:01.1 subsystem <- 1022/2b80
PCI: 00:01.1 cmd <- 141
PCI: 00:01.2 cmd <- 540
PCI: 00:01.3 cmd <- 142
PCI: 00:02.0 subsystem <- 1022/2b80
PCI: 00:02.0 cmd <- 142
PCI: 00:02.1 subsystem <- 1022/2b80
PCI: 00:02.1 cmd <- 142
PCI: 00:04.0 subsystem <- 1022/2b80
PCI: 00:04.0 cmd <- 141
PCI: 00:05.0 subsystem <- 1022/2b80
PCI: 00:05.0 cmd <- 143
PCI: 00:05.1 subsystem <- 1022/2b80
PCI: 00:05.1 cmd <- 143
PCI: 00:05.2 subsystem <- 1022/2b80
PCI: 00:05.2 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0a03
PCI: 00:06.0 cmd <- 144
PCI: 00:06.1 subsystem <- 1022/2b80
PCI: 00:06.1 cmd <- 142
PCI: 00:08.0 subsystem <- 1022/2b80
PCI: 00:08.0 cmd <- 143
PCI: 00:0a.0 bridge ctrl <- 0003
PCI: 00:0a.0 cmd <- 140
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 140
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 140
PCI: 00:0e.0 bridge ctrl <- 0003
PCI: 00:0e.0 cmd <- 140
PCI: 00:0f.0 bridge ctrl <- 000b
PCI: 00:0f.0 cmd <- 147
PCI: 07:00.0 cmd <- 143
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00006000, offset=0x00110000, code_size=0x0000005b
Initializing CPU #0
CPU: vendor AMD device 60fb1
CPU: family 0f, model 6b, stepping 01
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 60fb1
CPU: family 0f, model 6b, stepping 01
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
CPU model AMD Athlon(tm) 64 X2 Dual Core Processor 4800+
Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.4 init
FAN_CTL: reg = 0x02a9, read value = 0x50
FAN_CTL: reg = 0x02a9, writing value = 0xd7
PNP: 002e.5 init
PNP: 002e.6 init
PCI: 00:01.1 init
PCI: 00:02.1 init
PCI: 00:04.0 init
IDE0
PCI: 00:05.0 init
SATA S SATA P
PCI: 00:05.1 init
SATA S SATA P
PCI: 00:05.2 init
SATA S SATA P
PCI: 00:06.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:06.1 init
base = f6140000
codec_mask = 01
codec viddid: 10ec0883
No verb!
PCI: 00:08.0 init
MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:0f.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:01.2 init
PCI: 00:01.3 init
PCI: 07:00.0 init
rom address for PCI: 07:00.0 = f6000000
copying VGA ROM Image from 0xf6000000 to 0xc0000, 0xf600 bytes
entering emulator
halt_sys: file /home/andi/freeBIOS/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 00000274
Moving GDT to 0x500...ok
Adjust low_table_end from 0x00000530 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote linuxbios table at: 00000530 - 00000dd4 checksum 601b
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candidate at offset 0
header_offset is 0
Try to load at offset 0x0
New segment addr 0x100000 size 0x31240 offset 0xc0 filesize 0xbda8
(cleaned up) New segment addr 0x100000 size 0x31240 offset 0xc0 filesize 0xbda8
New segment addr 0x131240 size 0x48 offset 0xbe80 filesize 0x48
(cleaned up) New segment addr 0x131240 size 0x48 offset 0xbe80 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x00000000bff80000 memsz: 0x0000000000031240 filesz: 0x000000000000bda8
Clearing Segment: addr: 0x00000000bff8bda8 memsz: 0x0000000000025498
Loading Segment: addr: 0x00000000bffb1240 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Jumping to boot code at 0x109618
FILO version 0.5 (andi at flashgordon) Tue Jun 5 19:45:50 CEST 2007
setup_timers: CPU 2400 MHz
Press <Enter> for default boot, or <Esc> for boot prompt... 5 4 3 2 1 timed out
boot: hde5:/vmlinuz initrd=hde5:/boot/initrd.img-2.6.21-1-amd64 root=/dev/sda2 ro console=ttyS0,115200
find_ide_controller: found PCI IDE controller 10de:037f prog_if=0x85
find_ide_controller: primary channel: native PCI mode
find_ide_controller: cmd_base=0x3000 ctrl_base=0x3070
ide_software_reset: Waiting for ide2 to become ready for reset... ok
init_drive: Testing for hde
init_drive: Probing for hde
init_drive: LBA mode, sectors=268435455
init_drive: LBA48 mode, sectors=488395055
init_drive: Init device params... ok
hde: LBA48 250GB: SAMSUNG SP2504C
init_drive: Testing for hdf
init_drive: Probing for hdf
IDE timeout after 50 ms while waiting for drq()
pio_data_in: No DRQ from device after read command
print_status: IDE: status=0x0, err=0x0
init_drive: Testing for hdf
init_drive: Probing for hdf
IDE timeout after 50 ms while waiting for drq()
pio_data_in: No DRQ from device after read command
print_status: IDE: status=0x0, err=0x0
ide_readmany: sector 0 to 0x0010c040
ide_readmany: sector 132825420 to 0x0010d840
ide_readmany: sector 132825485 to 0x0010da40
ide_readmany: sector 132825486 to 0x0010dc40
Mounted ext2fs
ide_readmany: sector 132825491 to 0x0010e640
ide_readmany: sector 132825492 to 0x0010e840
ide_readmany: sector 132825493 to 0x0010ea40
ide_readmany: sector 132825494 to 0x0010ec40
ide_readmany: sector 132825495 to 0x0010ee40
ide_readmany: sector 132825496 to 0x0010f040
ide_readmany: sector 132825497 to 0x0010f240
ide_readmany: sector 132825498 to 0x0010f440
ide_readmany: sector 132825515 to 0x00111640
ide_readmany: sector 132825516 to 0x00111840
ide_readmany: sector 132825517 to 0x00111a40
ide_readmany: sector 132825518 to 0x00111c40
ide_readmany: sector 132825519 to 0x00111e40
ide_readmany: sector 132825520 to 0x00112040
ide_readmany: sector 132825521 to 0x00112240
ide_readmany: sector 132825522 to 0x00112440
ide_readmany: sector 132829571 to 0x0010c640
ide_readmany: sector 132829572 to 0x0010c840
ide_readmany: sector 132829573 to 0x0010ca40
ide_readmany: sector 132829574 to 0x0010cc40
ide_readmany: sector 132829575 to 0x0010ce40
ide_readmany: sector 132829576 to 0x0010d040
ide_readmany: sector 132829577 to 0x0010d240
ide_readmany: sector 132829578 to 0x0010d440
ide_readmany: sector 136233387 to 0x00111640
ide_readmany: sector 136233388 to 0x00111840
ide_readmany: sector 136233389 to 0x00111a40
ide_readmany: sector 136233390 to 0x00111c40
ide_readmany: sector 136233391 to 0x00111e40
ide_readmany: sector 136233392 to 0x00112040
ide_readmany: sector 136233393 to 0x00112240
ide_readmany: sector 136233394 to 0x00112440
ide_readmany: sector 136298891 to 0x0010d640
ide_readmany: sector 136298892 to 0x0010d840
ide_readmany: sector 136298893 to 0x0010da40
ide_readmany: sector 136298894 to 0x0010dc40
ide_readmany: sector 136298895 to 0x0010de40
ide_readmany: sector 136298896 to 0x0010e040
ide_readmany: sector 136298897 to 0x0010e240
ide_readmany: sector 136298898 to 0x0010e440
ext2fs_read_one: block 452608 offset=0 len=52 ret=0
ide_readmany: sector 136446347 to 0x0010d640
ide_readmany: sector 132825515 to 0x00111640
ide_readmany: sector 132825516 to 0x00111840
ide_readmany: sector 132825517 to 0x00111a40
ide_readmany: sector 132825518 to 0x00111c40
ide_readmany: sector 132825519 to 0x00111e40
ide_readmany: sector 132825520 to 0x00112040
ide_readmany: sector 132825521 to 0x00112240
ide_readmany: sector 132825522 to 0x00112440
ide_readmany: sector 136233387 to 0x00111640
ide_readmany: sector 136233388 to 0x00111840
ide_readmany: sector 136233389 to 0x00111a40
ide_readmany: sector 136233390 to 0x00111c40
ide_readmany: sector 136233391 to 0x00111e40
ide_readmany: sector 136233392 to 0x00112040
ide_readmany: sector 136233393 to 0x00112240
ide_readmany: sector 136233394 to 0x00112440
ide_readmany: sector 136298891 to 0x0010d640
ext2fs_read_one: block 452608 offset=0 len=560 ret=0
ide_readmany: sector 136446347 to 0x0010d640
ide_readmany: sector 136446348 to 0x0010d840
Found Linuxblock 452609 offset=1099 len=256 ret=0
ide_readmany: sector 136446357 to 0x0010ea40
version 2.6.21-1-amd64 (unknown at Debian) #1 SMP Fri May 18 23:28:21 CEST 2007 bzImage.
Loading kernel... sector 136446443 to 0x00111640
ide_readmany: sector 136446444 to 0x00111840
ide_readmany: sector 136446445 to 0x00111a40
ide_readmany: sector 136446446 to 0x00111c40
ide_readmany: sector 136446447 to 0x00111e40
ide_readmany: sector 136446448 to 0x00112040
ide_readmany: sector 136446449 to 0x00112240
ide_readmany: sector 136446450 to 0x00112440
ext2fs_read_many: 10 blocks 452610 - 452619 len=1561450 ret=0
ide_readmany: sectors 136446363 - 136446442 ( 80) to 0x40231290
ext2fs_read_many: 372 blocks 452621 - 452992 len=1520490 ret=40960
ide_readmany: sectors 136446451 - 136446706 (256) to 0x4023b290
ide_readmany: sectors 136446707 - 136446962 (256) to 0x4025b290
ide_readmany: sectors 136446963 - 136447218 (256) to 0x4027b290
ide_readmany: sectors 136447219 - 136447474 (256) to 0x4029b290
ide_readmany: sectors 136447475 - 136447730 (256) to 0x402bb290
ide_readmany: sectors 136447731 - 136447986 (256) to 0x402db290
ide_readmany: sectors 136447987 - 136448242 (256) to 0x402fb290
ide_readmany: sectors 136448243 - 136448498 (256) to 0x4031b290
ide_readmany: sectors 136448499 - 136448754 (256) to 0x4033b290
ide_readmany: sectors 136448755 - 136449010 (256) to 0x4035b290
ide_readmany: sectors 136449011 - 136449266 (256) to 0x4037b290
ide_readmany: sectors 136449267 - 136449426 (160) to 0x4039b290
ext2fs_read: discarding 3222 surplus bytes
ext2fs_read: done reading many len=0 ret=1561450
ok
ide_readmany: sector 132825493 to 0x0010ea40
ide_readmany: sector 132825515 to 0x00111640
ide_readmany: sector 132825516 to 0x00111840
ide_readmany: sector 132825517 to 0x00111a40
ide_readmany: sector 132825518 to 0x00111c40
ide_readmany: sector 132825519 to 0x00111e40
ide_readmany: sector 132825520 to 0x00112040
ide_readmany: sector 132825521 to 0x00112240
ide_readmany: sector 132825522 to 0x00112440
File not found
Can't open initrd: hde5:/boot/initrd.img-2.6.21-1-amd64
More information about the coreboot
mailing list