[LinuxBIOS] r2706 build service

[LinuxBIOS information]

Dear LinuxBIOS readers!

This is the automated build check service of LinuxBIOS.

The developer "uwe" checked in revision 2706 to
the LinuxBIOS source repository and caused the following 
changes:

Change Log:
The UART disable code was causing a hang and was worked around with a
return that skipped the disable code. This patch removes the return and
fixes the UART disable code.

The problem was that the disable code was ORing bits into the Legacy_IO
MSR causing issues with the LPC SIOs init code that would manifest as a
hang because the IO would not be decoded correctly. ANDing to clear the
bits fixes the issue.

Signed-off-by: Marc Jones <marc.jones at amd.com>
Acked-by: Ronald G. Minnich <rminnich at gmail.com>
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>



Build Log:
Compilation of arima:hdama is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2706&device=hdama&vendor=arima
Configuration of artecgroup:dbe61 is still broken
Compilation of ibm:e325 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2706&device=e325&vendor=ibm
Compilation of ibm:e326 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2706&device=e326&vendor=ibm
Compilation of iwill:dk8s2 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2706&device=dk8s2&vendor=iwill
Compilation of iwill:dk8x is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2706&device=dk8x&vendor=iwill


If something broke during this checkin please be a pain 
in uwe's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     LinuxBIOS automatic build system