[LinuxBIOS] Added mainboard commell/lv671 and compile works, but ...
dieter at bloms.de
Thu Jun 7 08:34:19 CEST 2007
On Wed, Jun 06, Uwe Hermann wrote:
> On Wed, Jun 06, 2007 at 08:36:31AM +0200, Dieter Bloms wrote:
> > I have tared my stuff, maybe someone is willing to have a look at it:
> > http://www.bloms.de/download/commell_lv671.tar.gz
> Please always post (signed-off) patches, tarballs are hard to review and
> comment on.
ok, I will do it in future.
> In Config.lb you have
> option ROM_SIZE=512*1024+128*1024
> which looks wrong. ROM_SIZE is the size of your chip, which is
> probably 512*1024.
without +128*1024 I got a to liddle rom file, but I will correct this
and will see, where to change values to get the right rom sizes.
I saw this by another motherboards like tyan/s2850 board
> Issue 2:
> option USE_FALLBACK_IMAGE=0
> should probably be set to 1. If you only use one image it has to be the
> fallback image AFAIK, otherwise it won't work.
ok, will change that.
> Other than that I cannot spot any obvious problems with the code, it
> _should_ work, usually...
I do not get viruses because I do not use MS software.
If you use Outlook then please do not put my email address in your
address-book so that WHEN you get a virus it won't use my address in the
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 189 bytes
Desc: Digital signature
More information about the coreboot