[LinuxBIOS] new target iei juki-511p/rocky-512
uwe at hermann-uwe.de
Thu Jun 7 23:01:41 CEST 2007
On Mon, Jun 04, 2007 at 06:15:17PM +0600, Nikolay Petukhov wrote:
> 2007/6/3, Stefan Reinauer <stepan at coresystems.de>:
> >Please sign off the patch according to
> >so we can check this patch in!
> Add sign-off.
The Super I/O patch is committed as r2714, the JUKI-511P code in r2716,
both with minor cosmetic changes.
I also renamed the directory to juki-511p (minus vs. underscore).
> >What does not work? ide1? AFAICS the boards only have one IDE port!?
> The this boards has two IDE ports. IDE0 has 40-pin IDE connector. IDE1
> has CF connector.
Ah, ok. Does booting from IDE1 work with a proprietary BIOS? Try my
CS5530 patch, that _may_ fix the problem (it initializes both IDE0 and
IDE1). Some more IDE work may be needed in LinuxBIOS, though.
Please post a boot log with the CS5530 patch applied.
> +#dir /pc80
> +#config chip.h
Why is this commented? Not needed?
> + device pci 12.1 on end # SMI
> + device pci 12.2 on end # IDE
> + device pci 12.3 on end # Audio
> + device pci 12.4 on end # VGA onboard
With my CS5530 patch you might need to enable IDE0/IDE1 explicitly here:
register "ide0_enable" = "1"
register "ide1_enable" = "1"
http://www.hermann-uwe.de | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 189 bytes
Desc: Digital signature
More information about the coreboot