[LinuxBIOS] r2716 build service

[LinuxBIOS information]

Dear LinuxBIOS readers!

This is the automated build check service of LinuxBIOS.

The developer "uwe" checked in revision 2716 to
the LinuxBIOS source repository and caused the following 
changes:

Change Log:
Add support for the IEI JUKI-511P and IEI ROCKY-512 half-size boards.

Both are very similar, thus both use the JUKI-511P target.

Linux with patches from Juergen Beisert
(http://www.linuxbios.org/pipermail/linuxbios/2007-May/020932.html)
boots and work fine (ide, usb, ethernet, serial, keyboard and sound
work normally).

Problems:
 - Filo loads a bzImage only from ide0 (ide1 doesn't work yet).
 - Video doesn't work, yet.

Signed-off-by: Nikolay Petukhov <nikolay.petukhov at gmail.com>
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>



Build Log:
Compilation of arima:hdama is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=hdama&vendor=arima
Configuration of artecgroup:dbe61 is still broken
Compilation of ibm:e325 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=e325&vendor=ibm
Compilation of ibm:e326 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=e326&vendor=ibm
Compilation of iei:juki-511p is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=juki-511p&vendor=iei
Compilation of iwill:dk8s2 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=dk8s2&vendor=iwill
Compilation of iwill:dk8x is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2716&device=dk8x&vendor=iwill


If something broke during this checkin please be a pain 
in uwe's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     LinuxBIOS automatic build system