[LinuxBIOS] get some output on serial console of commel lv671 board, but not readable one
Stefan Reinauer
stepan at coresystems.de
Fri Jun 15 20:17:16 CEST 2007
* Dieter Bloms <linuxbios at bloms.de> [070615 20:08]:
> Hi,
>
> I managed to get some stuff on my serial out, when I switch on my
> commell lv671 board with i82801 chip and w83627hf superio, but it is not
> readable. The most of it are ? inverse colour like :
>
> ����������������SSQ����|���Ӌ����E���������������L�������E�����������i�������������������������iT���������������i�������[10;1H�����������������Ϝ������������������Ϭ�������������������������ϼԜ�������������������Ϭ�����������������������������c߈�w�H��
> I use 115200,8N1, which works fine, if I boot into linux with original
> bios.
Try changing the baud rate in your terminal program to, say, 57600
This may be a clock rate issue of the superio clock.
Output is goood. This looks like its the wrong baudrate.
--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de • http://www.coresystems.de/
More information about the coreboot
mailing list