[LinuxBIOS] r2725 build service

[LinuxBIOS information]

Dear LinuxBIOS readers!

This is the automated build check service of LinuxBIOS.

The developer "uwe" checked in revision 2725 to
the LinuxBIOS source repository and caused the following 
changes:

Change Log:
This patch fixes up a couple mistakes I made with the i82810 and mew-vw to make
the system boot to a command line.

This patch comments out the code to set up the vga framebuffer to allow
the system to boot, without this fix the system hangs during elfboot.

The only line that is absolutely necessary to change is the SMRAM setup,
however I've commented out all vga setup to make it very obvious to both
the kernel/payload and anyone looking at the code that vga isn't
currently working. This setup might also be better handled in
northbridge.c, if it doesn't need to be done before ram init, yet
another reason to comment it all. In the future, LinuxBIOS needs to be
told that the graphics memory area, 1mb or 512kb (at the user or
developer's option), is reserved for the onchip vga, but I'm not sure if
it's taken at the top or bottom of the memory, yet. LB may also need to
set a base address for the AGP aperture and/or be told that range is
reserved as well, whether this was originally the job of the system bios
or vga bios is still a mystery. It also corrects the number of entries
in irq_tables.c, without this fix the kernel would probably complain and
hang due to unmapped IRQs.

Signed-off-by: Corey Osgood <corey.osgood at gmail.com>
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>



Build Log:
Compilation of arima:hdama is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2725&device=hdama&vendor=arima
Configuration of artecgroup:dbe61 is still broken
Compilation of ibm:e325 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2725&device=e325&vendor=ibm
Compilation of ibm:e326 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2725&device=e326&vendor=ibm
Compilation of iei:juki-511p is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2725&device=juki-511p&vendor=iei
Compilation of iwill:dk8s2 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2725&device=dk8s2&vendor=iwill
Compilation of iwill:dk8x is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2725&device=dk8x&vendor=iwill


If something broke during this checkin please be a pain 
in uwe's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     LinuxBIOS automatic build system