[LinuxBIOS] Problems on Compilation with abuild

[ccases at navista.fr]

Hi,

If I use autobuild (abuild), I have this message :

Processing mainboard/amd/quartet (i386: ok)
Using existing test target
/home/../LinuxBIOSv2/targets/amd/quartet/Config-abuild.lb ok
  Creating builddir...ok
  Compiling image ..FAILED after 4s! Log excerpt:
/bin/sh: -c: line 1: syntax error near unexpected token `('
/bin/sh: -c: line 1: `gcc -Os -Wall -DARCH='i386' -DHAVE_MOVNTI='1'
-DCROSS_COMPILE -DCC='gcc' -DHOSTCC='gcc' -DOBJCOPY='objcopy --gap-fill
0xff' -DLINUXBIOS_VERSION='"2.0.0"' -DLINUXBIOS_BUILD='"mar mar  6
11:06:48 CET 2007"' -DLINUXBIOS_COMPILE_TIME='"11:06:48"'
-DLINUXBIOS_COMPILE_BY='"ccases"' -DLINUXBIOS_COMPILE_HOST='"TestBios"'
-DLINUXBIOS_COMPILE_DOMAIN='"localdomain"' -DLINUXBIOS_COMPILER='"version
gcc 3.3.5 (Debian 1:3.3.5-13)"' -DLINUXBIOS_LINKER='"GNU ld version 2.15"'
-DLINUXBIOS_ASSEMBLER='"Version de l'assembleur GNU 2.15 (i386-linux)
utilisant la version BFD 2.15"' -DCONFIG_USE_INIT='0'
-DHAVE_FALLBACK_BOOT='1' -DHAVE_FAILOVER_BOOT='0'
-DROM_IMAGE_SIZE='0x20000' -DPAYLOAD_SIZE='0x20000'
-D_ROMBASE='0xfffa0000' -D_RESET='0xfffa0000'
-D_EXCEPTION_VECTORS='0xfffa0100' -DSTACK_SIZE='0x2000'
-DHEAP_SIZE='0x4000' -D_RAMBASE='0x4000' -DUSE_DCACHE_RAM='0'
-DDCACHE_RAM_BASE='0xc0000' -DDCACHE_RAM_SIZE='0x1000'
-DDCACHE_RAM_GLOBAL_VAR_SIZE='0x0' -DCONFIG_AP_CODE_IN_CAR='0'
-DMEM_TRAIN_SEQ='0' -DWAIT_BEFORE_CPUS_INIT='0' -DCONFIG_COMPRESS='1'
-DCONFIG_UNCOMPRESSED='0' -DCONFIG_LB_MEM_TOPK='2048'
-DHAVE_OPTION_TABLE='1' -DUSE_OPTION_TABLE='1' -DLB_CKS_RANGE_START='49'
-DLB_CKS_RANGE_END='122' -DLB_CKS_LOC='123'
-DCRT0='/home/ccases/LinuxBIOSv2/src/arch/i386/init/crt0.S.lb' -DDEBUG='1'
-DCONFIG_CONSOLE_VGA='0' -DCONFIG_CONSOLE_VGA_MULTI='0'
-DCONFIG_CONSOLE_VGA_ONBOARD_AT_FIRST='0' -DCONFIG_CONSOLE_BTEXT='0'
-DCONFIG_CONSOLE_LOGBUF='0' -DCONFIG_CONSOLE_SROM='0'
-DCONFIG_CONSOLE_SERIAL8250='1' -DDEFAULT_CONSOLE_LOGLEVEL='8'
-DMAXIMUM_CONSOLE_LOGLEVEL='8' -DCONFIG_SERIAL_POST='0'
-DTTYS0_BASE='0x3f8' -DTTYS0_BAUD='115200' -DTTYS0_LCS='0x3'
-DCONFIG_USE_PRINTK_IN_CAR='0'
-DMAINBOARD='/home/ccases/LinuxBIOSv2/src/mainboard/amd/quartet'
-DMAINBOARD_PART_NUMBER='"QUARTET"' -DMAINBOARD_VENDOR='"AMD"'
-DMAINBOARD_PCI_SUBSYSTEM_VENDOR_ID='0'
-DMAINBOARD_PCI_SUBSYSTEM_DEVICE_ID='0x0' -DCONFIG_MAX_PCI_BUSES='255'
-DCONFIG_SMP='1' -DCONFIG_MAX_CPUS='4' -DCONFIG_MAX_PHYSICAL_CPUS='4'
-DCONFIG_LOGICAL_CPUS='0' -DSERIAL_CPU_INIT='1' -DAPIC_ID_OFFSET='0'
-DENABLE_APIC_EXT_ID='0' -DLIFT_BSP_APIC_ID='0' -DCONFIG_IDE_PAYLOAD='0'
-DCONFIG_ROM_PAYLOAD='1' -DCONFIG_ROM_PAYLOAD_START='0xfff80000'
-DCONFIG_COMPRESSED_PAYLOAD_NRV2B='0' -DCONFIG_COMPRESSED_PAYLOAD_LZMA='0'
-DCONFIG_PRECOMPRESSED_PAYLOAD='0' -DCONFIG_SERIAL_PAYLOAD='0'
-DCONFIG_FS_PAYLOAD='0' -DCONFIG_FS_EXT2='0' -DCONFIG_FS_ISO9660='0'
-DCONFIG_FS_FAT='0' -DAUTOBOOT_DELAY='2'
-DAUTOBOOT_CMDLINE='"hdc1:/vmlinuz root=/dev/hdc3 console=tty0
console=ttyS0,115200"' -DUSE_WATCHDOG_ON_BOOT='0'
-DCONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT='1' -DCONFIG_AGP_PLUGIN_SUPPORT='1'
-DCONFIG_CARDBUS_PLUGIN_SUPPORT='1' -DCONFIG_PCIX_PLUGIN_SUPPORT='1'
-DCONFIG_PCIEXP_PLUGIN_SUPPORT='1' -DCONFIG_IDE='0' -DIDE_BOOT_DRIVE='0'
-DIDE_OFFSET='0' -DPCI_IO_CFG_EXT='0' -DCONFIG_CHIP_NAME='0'
-DHAVE_INIT_TIMER='1' -DMAX_REBOOT_CNT='3' -DFAKE_SPDROM='0'
-DHAVE_ACPI_TABLES='0' -DACPI_SSDTX_NUM='0' -DHT_CHAIN_UNITID_BASE='1'
-DHT_CHAIN_END_UNITID_BASE='32' -DSB_HT_CHAIN_UNITID_OFFSET_ONLY='1'
-DSB_HT_CHAIN_ON_BUS0='0' -DPCI_BUS_SEGN_BITS='0' -DMMCONF_SUPPORT='0'
-DHW_MEM_HOLE_SIZEK='0' -DHW_MEM_HOLE_SIZE_AUTO_INC='0'
-DK8_HT_FREQ_1G_SUPPORT='0' -DK8_REV_F_SUPPORT='0' -DCBB='0' -DCDB='24'
-DDIMM_SUPPORT='0x108' -DCPU_SOCKET_TYPE='16' -DCPU_ADDR_BITS='40'
-DCONFIG_PCI_ROM_RUN='0' -DCONFIG_PCI_64BIT_PREF_MEM='0'
-DHAVE_MP_TABLE='1' -DHAVE_PIRQ_TABLE='1' -DUSE_FALLBACK_IMAGE='0'
-DHAVE_HARD_RESET='1' -DIRQ_SLOT_COUNT='9' -DCONFIG_IOAPIC='1'
-DFALLBACK_SIZE='0x40000' -DROM_SIZE='0x80000'
-DROM_SECTION_SIZE='0x40000' -DROM_SECTION_OFFSET='0x0'
-DXIP_ROM_SIZE='0x10000' -DXIP_ROM_BASE='0xfffb0000'
-DLINUXBIOS_EXTRA_VERSION='".0-normal"'
-DMAINBOARD_POWER_ON_AFTER_POWER_FAIL='MAINBOARD_POWER_ON'
-DCONFIG_UDELAY_IO='0' -DUSE_FAILOVER_IMAGE='0'
-DAGP_APERTURE_SIZE='0x4000000' -DCONFIG_UDELAY_TSC='0'
-DCONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2='0'
/home/ccases/LinuxBIOSv2/util/options/build_opt_tbl.c -o build_opt_tbl'
make[1]: *** [build_opt_tbl] Erreur 2
make[1]: Leaving directory
`/home/ccases/LinuxBIOSv2/util/abuild/linuxbios-builds/amd_quartet/normal'
make: *** [normal/linuxbios.rom] Erreur 1

It's the same message for all of the mainboard,

I use debian and suse the last version,
debian have gcc 3.3.5 & cpp 3.3.5 and suse have gcc 4.0.2 & cpp 4.0.2

I don't understand why the compilation doesn't work, if you have an idea ?

thank's by advance

CCases