[LinuxBIOS] trying to boot gigabyte m57sli-s4

Ward Vandewege ward at gnu.org
Thu Mar 8 19:03:56 CET 2007


On Tue, Mar 06, 2007 at 04:17:32PM -0800, Lu, Yinghai wrote:
> Please try 64bit latest kernel.

Please find the boot log for 2.6.15-amd64 (standard Ubuntu Dapper kernel)
attached. Same problem it seems.

I'll try a stock 2.6.20.1 after lunch and send in the boot log.

Thanks,
Ward.

-- 
Ward Vandewege <ward at fsf.org>
Free Software Foundation - Senior System Administrator
-------------- next part --------------
debug_port: 7
n_ports:    10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports:    10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports:    10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports:    10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports:    10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports:    10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports:    10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports:    10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports:    10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports:    10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 6
n_ports:    10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports:    10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports:    10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports:    10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports:    10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports:    10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports:    10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports:    10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports:    10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports:    10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 5
n_ports:    10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports:    10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports:    10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports:    10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports:    10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports:    10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports:    10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports:    10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports:    10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports:    10
ehci reset done
ehci started
No device found in debug port 4


LinuxBIOS-1.1.8_m57sli_Fallback Thu Mar  8 11:42:29 EST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started: 
started ap apicid:  01
SBLink=00
NC node|link=00
begin msr fid, vid 310a120a0a0c020c
end   msr fid, vid 310a120a0a0c020c
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
400Mhz
Interleaved
RAM: 0x00200000 KB
Ram3
	dimm_mask = 00000011
	x4_mask = 00000000
	x16_mask = 00000000
	single_rank_mask = 00000000
	ODC = 00113222
	Addr Timing= 00202520
Initializing memory:  done
Setting variable MTRR 2, base:    0MB, range: 2048MB, type WB
set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=1a done
set DQS timing:DQSPos: 00 done
set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=2c done
Total DQS Training : tsc [00]=00000007e45f4eb0
Total DQS Training : tsc [01]=00000007e5b481be
Total DQS Training : tsc [02]=0000000851cc9e86
Total DQS Training : tsc [03]=0000000852ef494e
Ram4
v_esp=000ceec4
Copying data from cache to ram -- switching to use ram as stack... Done
Disabling cache as ram now 
Clearing initial memory region: Done
Copying LinuxBIOS to ram.
src=fffdf000
dst=00100000
linxbios_ram.nrv2b length = 0000d318
linxbios_ram.bin   length = 000212b0
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8_m57sli_Fallback Thu Mar  8 11:42:29 EST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
  PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:01.0 [10de/0360] enabled
PCI: 00:01.1 [10de/0368] enabled
PCI: 00:01.2 [10de/036a] enabled
PCI: 00:01.3 [10de/036b] enabled
PCI: 00:02.0 [10de/036c] enabled
PCI: 00:02.1 [10de/036d] enabled
PCI: 00:04.0 [10de/036e] enabled
PCI: 00:05.0 [10de/037f] enabled
PCI: 00:05.1 [10de/037f] enabled
PCI: 00:05.2 [10de/037f] enabled
PCI: 00:06.0 [10de/0370] enabled
PCI: 00:06.1 [10de/0371] enabled
PCI: 00:08.0 [10de/0373] enabled
PCI: 00:0a.0 [10de/0376] enabled
PCI: 00:0b.0 [10de/0374] enabled
PCI: 00:0c.0 [10de/0374] enabled
PCI: 00:0d.0 [10de/0378] enabled
PCI: 00:0e.0 [10de/0375] enabled
PCI: 00:0f.0 [10de/0377] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 disabled
PNP: 002e.4 disabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
PCI: pci_scan_bus for bus 01
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [10de/0392] enabled
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
done
Allocating resources...
Reading resources...
PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
PCI: 00:0f.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io
PCI: 00:0f.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem
PCI: 00:0f.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem
Done reading resources.
Allocating VGA resource PCI: 02:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0a.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f61fffff] mem <node 0 link 0>
PCI: 00:01.0 14 <- [0x00f6144000 - 0x00f6144fff] mem
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io
PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io
PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io
PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:01.3 10 <- [0x00f6100000 - 0x00f613ffff] mem
PCI: 00:02.0 10 <- [0x00f6145000 - 0x00f6145fff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io
PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io
PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io
PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io
PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io
PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io
PCI: 00:05.0 24 <- [0x00f6146000 - 0x00f6146fff] mem
PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io
PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io
PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io
PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io
PCI: 00:05.1 24 <- [0x00f6147000 - 0x00f6147fff] mem
PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io
PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io
PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io
PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io
PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io
PCI: 00:05.2 24 <- [0x00f6148000 - 0x00f6148fff] mem
PCI: 00:06.1 10 <- [0x00f6140000 - 0x00f6143fff] mem
PCI: 00:08.0 10 <- [0x00f6149000 - 0x00f6149fff] mem
PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io
PCI: 00:08.0 18 <- [0x00f614b000 - 0x00f614b0ff] mem
PCI: 00:08.0 1c <- [0x00f614c000 - 0x00f614c00f] mem
PCI: 00:0a.0 1c <- [0x0000001000 - 0x0000001fff] bus 02 io
PCI: 00:0a.0 24 <- [0x00e0000000 - 0x00efffffff] bus 02 prefmem
PCI: 00:0a.0 20 <- [0x00f4000000 - 0x00f60fffff] bus 02 mem
PCI: 02:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] mem
PCI: 02:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64
PCI: 02:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] mem64
PCI: 02:00.0 24 <- [0x0000001000 - 0x000000107f] io
PCI: 02:00.0 30 <- [0x00f6000000 - 0x00f601ffff] romem
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:00.0 subsystem <- 1022/2b80
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 subsystem <- 1022/2b80
PCI: 00:01.0 cmd <- 14f
mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
PCI: 00:01.1 subsystem <- 1022/2b80
PCI: 00:01.1 cmd <- 141
PCI: 00:01.2 cmd <- 540
PCI: 00:01.3 cmd <- 142
PCI: 00:02.0 subsystem <- 1022/2b80
PCI: 00:02.0 cmd <- 142
PCI: 00:02.1 subsystem <- 1022/2b80
PCI: 00:02.1 cmd <- 142
PCI: 00:04.0 subsystem <- 1022/2b80
PCI: 00:04.0 cmd <- 141
PCI: 00:05.0 subsystem <- 1022/2b80
PCI: 00:05.0 cmd <- 143
PCI: 00:05.1 subsystem <- 1022/2b80
PCI: 00:05.1 cmd <- 143
PCI: 00:05.2 subsystem <- 1022/2b80
PCI: 00:05.2 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0a03
PCI: 00:06.0 cmd <- 144
PCI: 00:06.1 subsystem <- 1022/2b80
PCI: 00:06.1 cmd <- 142
PCI: 00:08.0 subsystem <- 1022/2b80
PCI: 00:08.0 cmd <- 143
PCI: 00:0a.0 bridge ctrl <- 000b
PCI: 00:0a.0 cmd <- 147
PCI: 02:00.0 cmd <- 143
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 140
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 140
PCI: 00:0e.0 bridge ctrl <- 0003
PCI: 00:0e.0 cmd <- 140
PCI: 00:0f.0 bridge ctrl <- 0003
PCI: 00:0f.0 cmd <- 140
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00005000, offset=0x00110000, code_size=0x0000005b

Final              : tsc [0a]=00000008c9394b08
Initializing CPU #0
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped

Final              : tsc [0b]=00000008d92f11a3
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.5 init
PNP: 002e.6 init
PCI: 00:01.1 init
PCI: 00:02.1 init
PCI: 00:04.0 init
IDE0
PCI: 00:05.0 init
SATA S 	SATA P 
PCI: 00:05.1 init
SATA S 	SATA P 
PCI: 00:05.2 init
SATA S 	SATA P 
PCI: 00:06.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:06.1 init
base = f6140000
codec_mask = 01
codec viddid: 10ec0883
No verb!
PCI: 00:08.0 init
MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:0f.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:01.2 init
PCI: 00:01.3 init
PCI: 02:00.0 init
rom address for PCI: 02:00.0 = f6000000
copying VGA ROM Image from f6000000 to c0000, ee00 bytes
entering emulator
halt_sys: file /home/ward/lb/yh/freebios2/src/devices/emulator/x86emu/ops.c, line 4387
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 00000274
Adjust low_table_end from 0x00000500 to 0x00001000 
Adjust rom_table_end from 0x000f0400 to 0x00100000 
Wrote linuxbios table at: 00000500 - 00000db0  checksum bfd7

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candiate at offset 0
New segment addr 0x100000 size 0x3ff20 offset 0xc0 filesize 0x16168
(cleaned up) New segment addr 0x100000 size 0x3ff20 offset 0xc0 filesize 0x16168
New segment addr 0x13ff20 size 0x48 offset 0x16240 filesize 0x48
(cleaned up) New segment addr 0x13ff20 size 0x48 offset 0x16240 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x000000007ff84000 memsz: 0x000000000003e000 filesz: 0x0000000000016168
Clearing Segment: addr: 0x000000007ff9a168 memsz: 0x0000000000027e98
Loading Segment: addr: 0x000000000013ff20 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Loading Segment: addr: 0x000000000013e000 memsz: 0x0000000000001f20 filesz: 0x0000000000000000
Clearing Segment: addr: 0x000000000013e000 memsz: 0x0000000000001f20
Jumping to boot code at 0x10f768
FILO version 0.5 (ward at neuromancer) Tue Mar  6 14:58:22 EST 2007
collect_sys_info: boot eax = 0xe1fb007
collect_sys_info: boot ebx = 0x7ffe2180
collect_sys_info: boot arg = 0x7ffe2180
malloc_diag: alloc: 0 bytes (0 blocks), free: 16376 bytes (1 blocks)
malloc_diag: alloc: 24 bytes (1 blocks), free: 16352 bytes (1 blocks)
collect_elfboot_info: Bootloader: elfboot
collect_elfboot_info: Version: 1.3
malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks)
collect_linuxbios_info: Searching for LinuxBIOS tables...
find_lb_table: Found canidate at: 00000500
find_lb_table: header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table: record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at: 00000500
malloc_diag: alloc: 128 bytes (3 blocks), free: 16248 bytes (1 blocks)
convert_memmap: 0x00000000000000 0x00000000001000 16
convert_memmap: 0x00000000001000 0x0000000009f000 1
convert_memmap: 0x000000000c0000 0x00000000030000 1
convert_memmap: 0x000000000f0000 0x00000000010000 16
convert_memmap: 0x00000000100000 0x0000007ff00000 1
collect_sys_info: 0000000000001000-00000000000a0000
collect_sys_info: 00000000000c0000-00000000000f0000
collect_sys_info: 0000000000100000-0000000080000000
collect_sys_info: RAM 2048 MB
relocate: Current location: 0x100000-0x13ff67
relocate: Relocating to 0x7ffc0090-0x7ffffff7... ok
setup_timers: CPU 2000 MHz
pci_init: Scanning PCI: found 25 devices
malloc_diag: alloc: 440 bytes (4 blocks), free: 15936 bytes (1 blocks)
pci_init: 00:00.0 10de:0369 0500 00
pci_init: 00:01.0 10de:0360 0601 00
pci_init: 00:01.1 10de:0368 0c05 00
pci_init: 00:01.2 10de:036a 0500 00
pci_init: 00:01.3 10de:036b 0b40 00
pci_init: 00:02.0 10de:036c 0c03 10
pci_init: 00:02.1 10de:036d 0c03 20
pci_init: 00:04.0 10de:036e 0101 8a
pci_init: 00:05.0 10de:037f 0101 85
pci_init: 00:05.1 10de:037f 0101 85
pci_init: 00:05.2 10de:037f 0101 85
pci_init: 00:06.0 10de:0370 0604 00
pci_init: 00:06.1 10de:0371 0403 00
pci_init: 00:08.0 10de:0373 0680 00
pci_init: 00:0a.0 10de:0376 0604 00
pci_init: 00:0b.0 10de:0374 0604 00
pci_init: 00:0c.0 10de:0374 0604 00
pci_init: 00:0d.0 10de:0378 0604 00
pci_init: 00:0e.0 10de:0375 0604 00
pci_init: 00:0f.0 10de:0377 0604 00
pci_init: 00:18.0 1022:1100 0600 00
pci_init: 00:18.1 1022:1101 0600 00
pci_init: 00:18.2 1022:1102 0600 00
pci_init: 00:18.3 1022:1103 0600 00
pci_init: 02:00.0 10de:0392 0300 00
menu: hde1:/boot/grub/menu.lst
malloc_diag: alloc: 456 bytes (5 blocks), free: 15920 bytes (1 blocks)
file_open: dev=hde1, path=/boot/grub/menu.lst
find_ide_controller: found PCI IDE controller 10de:037f prog_if=0x85
find_ide_controller: primary channel: native PCI mode
find_ide_controller: cmd_base=0x3000 ctrl_base=0x3070
ide_software_reset: Waiting for ide2 to become ready for reset... ok
init_drive: Testing for hde
init_drive: Probing for hde
init_drive: LBA mode, sectors=268435455
init_drive: LBA48 mode, sectors=488397168
init_drive: Init device params... ok
hde: LBA48 250GB: WDC WD2500JS-60NCB1                     
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
devopen: Partition 1 start 63 length 476327187
Mounted ext2fs
malloc_diag: alloc: 440 bytes (4 blocks), free: 15936 bytes (1 blocks)
Press any key to continue.
Press any key to continue.
malloc_diag: alloc: 600 bytes (5 blocks), free: 15776 bytes (1 blocks)
malloc_diag: alloc: 616 bytes (6 blocks), free: 15760 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
devopen: already open
malloc_diag: alloc: 600 bytes (5 blocks), free: 15776 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 616 bytes (6 blocks), free: 15760 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic
devopen: already open
malloc_diag: alloc: 600 bytes (5 blocks), free: 15776 bytes (1 blocks)
Found Linux version 2.6.15-23-amd64-generic (buildd at yellow) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-23-amd64-generic"
parse_command_line: kernel command line at 0x91000
malloc_diag: alloc: 656 bytes (6 blocks), free: 15720 bytes (1 blocks)
parse_command_line: initrd=/boot/initrd.img-2.6.15-23-amd64-generic
parse_command_line: kernel command line (58 bytes): "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1689b7
Loading kernel... ok
file_open: dev=<NULL>, path=/boot/initrd.img-2.6.15-23-amd64-generic
load_initrd: start=0x7f8d0000 end=0x7ffbf25f
Loading initrd... ok
malloc_diag: alloc: 600 bytes (5 blocks), free: 15776 bytes (1 blocks)
start_linux: eip=0x100000
Jumping to entry point...
[    0.000000] Bootdata ok (command line is root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200)
[    0.000000] Linux version 2.6.15-23-amd64-generic (buildd at yellow) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
[    0.000000] ACPI: Unable to locate RSDP
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of nodes 1
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000080000000
[    0.000000] Using node hash shift of 63
[    0.000000] Bootmem setup node 0 0000000000000000-0000000080000000
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] OEM ID: GIGABYTE <6>Product ID: M57SLI       <6>APIC at: 0xFEE00000
[    0.000000] Processor #0 15:11 APIC version 16
[    0.000000] Processor #1 15:11 APIC version 16
[    0.000000] I/O APIC #2 Version 17 at 0xF6144000.
[    0.000000] Setting APIC routing to physical flat
[    0.000000] Processors: 2
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
[    0.000000] Checking aperture...
[    0.000000] CPU 0: aperture @ f0000000 size 64 MB
[    0.000000] SMP: Allowing 3 CPUs, 1 hotplug CPUs
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[    0.000000] time.c: Using 1.193182 MHz PIT timer.
[    0.000000] time.c: Detected 2000.011 MHz processor.
[   82.365239] Console: colour VGA+ 80x25
[   82.549966] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   82.559079] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   82.581397] Memory: 2053920k/2097152k available (2139k kernel code, 42844k reserved, 754k data, 180k init)
[   82.651325] Calibrating delay using timer specific routine.. 4004.99 BogoMIPS (lpj=2002499)
[   82.660637] Security Framework v1.0.0 initialized
[   82.665841] SELinux:  Disabled at boot.
[   82.670111] Mount-cache hash table entries: 256
[   82.675215] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   82.683089] CPU: L2 Cache: 512K (64 bytes/line)
[   82.688103] CPU 0(2) -> Node 0 -> Core 0
[   82.692459] mtrr: v2.0 (20020519)
[   82.696144] SMP alternatives: switching to UP code
[   82.701642] checking if image is initramfs... it is
[   83.253693] Freeing initrd memory: 7100k freed
[   83.261720] Using local APIC timer interrupts.
[   83.316774] Detected 12.500 MHz APIC timer.
[   83.321709] SMP alternatives: switching to SMP code
[   83.327448] Booting processor 1/2 APIC 0x1
[   83.342477] Initializing CPU#1
[   83.402739] Calibrating delay using timer specific routine.. 3999.44 BogoMIPS (lpj=1999720)
[   83.402745] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   83.402747] CPU: L2 Cache: 512K (64 bytes/line)
[   83.402749] CPU 1(2) -> Node 0 -> Core 1
[   83.402825] AMD Processor model unknown stepping 02
[   83.402832] CPU 1: Syncing TSC to CPU 0.
[   83.402928] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 518 cycles)
[   83.402935] Brought up 2 CPUs
[   83.456986] time.c: Using PIT/TSC based timekeeping.
[   83.462723] testing NMI watchdog ... OK.
[   83.477641] NET: Registered protocol family 16
[   83.483135] PCI: Using configuration type 1
[   83.488512] ACPI: Subsystem revision 20051216
[   83.493571] ACPI: Interpreter disabled.
[   83.498043] Linux Plug and Play Support v0.97 (c) Adam Belay
[   83.504629] pnp: PnP ACPI: disabled
[   83.508721] PCI: Probing PCI hardware
[   83.514661] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
[   83.522178] PCI: IRQ 0 for device 0000:00:06.1 doesn't match PIRQ mask - try pci=usepirqmask
[   83.532040] PCI-DMA: Disabling IOMMU.
[   83.536481] PCI: Bridge: 0000:00:06.0
[   83.540725]   IO window: disabled.
[   83.544672]   MEM window: disabled.
[   83.548728]   PREFETCH window: disabled.
[   83.553253] PCI: Bridge: 0000:00:0a.0
[   83.557498]   IO window: 1000-1fff
[   83.561452]   MEM window: f4000000-f60fffff
[   83.566298]   PREFETCH window: e0000000-efffffff
[   83.571641] PCI: Bridge: 0000:00:0b.0
[   83.575869]   IO window: disabled.
[   83.579833]   MEM window: disabled.
[   83.583862]   PREFETCH window: disabled.
[   83.588412] PCI: Bridge: 0000:00:0c.0
[   83.592666]   IO window: disabled.
[   83.596603]   MEM window: disabled.
[   83.600643]   PREFETCH window: disabled.
[   83.605196] PCI: Bridge: 0000:00:0d.0
[   83.609432]   IO window: disabled.
[   83.613368]   MEM window: disabled.
[   83.617405]   PREFETCH window: disabled.
[   83.621948] PCI: Bridge: 0000:00:0e.0
[   83.626176]   IO window: disabled.
[   83.630139]   MEM window: disabled.
[   83.634194]   PREFETCH window: disabled.
[   83.638754] PCI: Bridge: 0000:00:0f.0
[   83.643001]   IO window: disabled.
[   83.646954]   MEM window: disabled.
[   83.651010]   PREFETCH window: disabled.
[   83.655816] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   83.664440] audit: initializing netlink socket (disabled)
[   83.670725] audit(1173376879.307:1): initialized
[   83.676248] VFS: Disk quotas dquot_6.5.1
[   83.680842] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   83.688394] Initializing Cryptographic API
[   83.693181] io scheduler noop registered
[   83.697810] io scheduler anticipatory registered
[   83.703205] io scheduler deadline registered
[   83.708223] io scheduler cfq registered
[   83.712935] pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS
[   83.721638] assign_interrupt_mode Found MSI capability
[   83.727665] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
[   83.736372] assign_interrupt_mode Found MSI capability
[   83.742391] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
[   83.751117] assign_interrupt_mode Found MSI capability
[   83.757153] pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
[   83.765865] assign_interrupt_mode Found MSI capability
[   83.771889] pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS
[   83.780594] assign_interrupt_mode Found MSI capability
[   83.786613] pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS
[   83.795299] assign_interrupt_mode Found MSI capability
[   83.813198] Real Time Clock Driver v1.12
[   83.817809] Linux agpgart interface v0.101 (c) Dave Jones
[   83.824189] PNP: No PS/2 controller found. Probing ports directly.
[   83.831565] serio: i8042 AUX port at 0x60,0x64 irq 12
[   83.837442] serio: i8042 KBD port at 0x60,0x64 irq 1
[   83.843204] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[   83.853246] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   83.861914] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   83.870734] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   83.878114] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   83.887608] mice: PS/2 mouse device common for all mice
[   83.893785] NET: Registered protocol family 2
[   83.908510] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[   83.917114] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   83.927831] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   83.936168] TCP: Hash tables configured (established 262144 bind 65536)
[   83.943874] TCP reno registered
[   83.947600] input: AT Translated Set 2 keyboard as /class/input/input0
[   83.955279] TCP bic registered
[   83.958835] NET: Registered protocol family 1
[   83.963903] NET: Registered protocol family 8
[   83.968976] NET: Registered protocol family 20
[   83.974208] Freeing unused kernel memory: 180k freed
Begin: Loading essential drivers... ...
[   84.018144] Capability LSM initialized
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
[   84.463146] SCSI subsystem initialized
[   84.469803] PCI: No IRQ known for interrupt pin A of device 0000:00:05.0. Please try using pci=biosirq.
[   84.480787] ata1: SATA max UDMA/133 cmd 0x3000 ctl 0x3072 bmdma 0x2CD0 irq 0
[   84.488973] ata2: SATA max UDMA/133 cmd 0x3010 ctl 0x3082 bmdma 0x2CD8 irq 0
[   84.497177] Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: 
[   84.503534] <ffffffff8020f2e2>{strlen+2}
[   84.510993] PGD 7dd8a067 PUD 7faa3067 PMD 0 
[   84.516079] Oops: 0000 [1] PREEMPT SMP 
[   84.520663] CPU 0 
[   84.523033] Modules linked in: sata_nv libata scsi_mod processor fbcon tileblit font bitblit softcursor capability commoncap
[   84.536407] Pid: 1705, comm: modprobe Not tainted 2.6.15-23-amd64-generic #1
[   84.544569] RIP: 0010:[<ffffffff8020f2e2>] <ffffffff8020f2e2>{strlen+2}
[   84.552066] RSP: 0000:ffff81007dd89cb0  EFLAGS: 00010246
[   84.558484] RAX: 0000000000000000 RBX: 0000000000000009 RCX: 0000000000000000
[   84.566757] RDX: ffff81007fa59390 RSI: ffffffff80277c90 RDI: 0000000000000000
[   84.575033] RBP: ffff81007fa59390 R08: 0000000000000000 R09: 0000000000000020
[   84.583294] R10: 0000000000000001 R11: 000000000000000a R12: ffffffff88049fc0
[   84.591538] R13: ffff81007fa593a0 R14: ffffffff88049f00 R15: 0000000000000000
[   84.599824] FS:  00002aaaaadfb6d0(0000) GS:ffffffff80447800(0000) knlGS:0000000000000000
[   84.609215] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   84.615877] CR2: 0000000000000000 CR3: 000000007faf5000 CR4: 00000000000006e0
[   84.624131] Process modprobe (pid: 1705, threadinfo ffff81007dd88000, task ffff81007fb90920)
[   84.633928] Stack: ffffffff80274d61 ffff81007dc01280 ffffffff88049fc0 ffff81007fa59390 
[   84.643110]        ffffffff80274e79 0000000000000000 ffff81007fa59390 ffff81007fa59000 
[   84.652546]        0000000000000202 0000000000003010 
[   84.658499] Call Trace:<ffffffff80274d61>{make_class_name+33} <ffffffff80274e79>{class_device_del+185}
[   84.669406]        <ffffffff80274f49>{class_device_unregister+9} <ffffffff88028bc3>{:scsi_mod:scsi_remove_host+243}
[   84.681630]        <ffffffff88050b60>{:libata:ata_host_remove+16} <ffffffff880551b3>{:libata:ata_device_add+1251}
[   84.693680]        <ffffffff80294711>{pcibios_set_master+129} <ffffffff880673d5>{:sata_nv:nv_init_one+469}
[   84.704993]        <ffffffff8021c353>{pci_device_probe+243} <ffffffff802742d5>{driver_probe_device+101}
[   84.716029]        <ffffffff802743b0>{__driver_attach+0} <ffffffff802743f0>{__driver_attach+64}
[   84.726209]        <ffffffff802743b0>{__driver_attach+0} <ffffffff80273679>{bus_for_each_dev+73}
[   84.736512]        <ffffffff80273bb0>{bus_add_driver+128} <ffffffff8021bf52>{__pci_register_driver+178}
[   84.747471]        <ffffffff801641f5>{stop_machine_run+69} <ffffffff8015c751>{sys_init_module+257}
[   84.757996]        <ffffffff8010fede>{system_call+126} 
[   84.764421] 
[   84.764422] Code: 80 3f 00 74 14 48 89 f8 66 66 90 66 66 90 48 ff c0 80 38 00 
[   84.775294] RIP <ffffffff8020f2e2>{strlen+2} RSP <ffff81007dd89cb0>
[   84.782622] CR2: 0000000000000000
[   84.786455]  udevd-event[1704]: run_program: '/sbin/modprobe' abnormal exit
^[[5~^H^H


More information about the coreboot mailing list