[LinuxBIOS] trying to boot gigabyte m57sli-s4
Ward Vandewege
ward at gnu.org
Thu Mar 8 20:33:12 CET 2007
On Tue, Mar 06, 2007 at 04:17:32PM -0800, Lu, Yinghai wrote:
> Please try 64bit latest kernel.
OK, I tried a stock 2.6.20.1 kernel. This kernel boots fine with the
proprietary BIOS (see attached file minicom-gb-20070308-07-with-noapic.cap).
With LinuxBIOS, it doesn't even get to the kernel panic - it simply fails to
find its sata drives (sata_nv says it can't do anything with the SATA
controller devices because there's no IRQ assigned). The boot fails
consequently because it can't find its root filesystem. See the attached file
minicom-gb-20070308-04.cap.
Thanks,
Ward.
--
Ward Vandewege <ward at fsf.org>
Free Software Foundation - Senior System Administrator
-------------- next part --------------
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
LinuxBIOS-1.1.8_m57sli_Fallback Thu Mar 8 11:42:29 EST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 310a12120a0c0202
end msr fid, vid 310a120a0a0c020c
mcp55_num:01
ht reset -
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 5
n_ports: 10
ehci reset done
ehci started
No device found in debug port 5
debug_port: 6
n_ports: 10
ehci reset done
ehci started
No device found in debug port 6
debug_port: 7
n_ports: 10
ehci reset done
ehci started
No device found in debug port 7
debug_port: 8
n_ports: 10
ehci reset done
ehci started
No device found in debug port 8
debug_port: 9
n_ports: 10
ehci reset done
ehci started
No device found in debug port 9
debug_port: 10
n_ports: 10
ehci reset done
ehci started
No device found in debug port 10
debug_port: 1
n_ports: 10
ehci reset done
ehci started
No device found in debug port 1
debug_port: 2
n_ports: 10
ehci reset done
ehci started
No device found in debug port 2
debug_port: 3
n_ports: 10
ehci reset done
ehci started
No device found in debug port 3
debug_port: 4
n_ports: 10
ehci reset done
ehci started
No device found in debug port 4
LinuxBIOS-1.1.8_m57sli_Fallback Thu Mar 8 11:42:29 EST 2007 starting...
*sysinfo range: [000cf000,000cf730)
bsp_apicid=00
core0 started:
started ap apicid: 01
SBLink=00
NC node|link=00
begin msr fid, vid 310a120a0a0c020c
end msr fid, vid 310a120a0a0c020c
mcp55_num:01
Ram1.00
Ram2.00
Unbuffered
400Mhz
Interleaved
RAM: 0x00200000 KB
Ram3
dimm_mask = 00000011
x4_mask = 00000000
x16_mask = 00000000
single_rank_mask = 00000000
ODC = 00113222
Addr Timing= 00202520
Initializing memory: done
Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB
set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=1a done
set DQS timing:DQSPos: 00 done
set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=2c done
Total DQS Training : tsc [00]=00000007e462bdd8
Total DQS Training : tsc [01]=00000007e5b43f2e
Total DQS Training : tsc [02]=0000000850354ebe
Total DQS Training : tsc [03]=00000008515a962e
Ram4
v_esp=000ceec4
Copying data from cache to ram -- switching to use ram as stack... Done
Disabling cache as ram now
Clearing initial memory region: Done
Copying LinuxBIOS to ram.
src=fffdf000
dst=00100000
linxbios_ram.nrv2b length = 0000d318
linxbios_ram.bin length = 000212b0
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8_m57sli_Fallback Thu Mar 8 11:42:29 EST 2007 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [10de/0369] enabled
PCI: 00:01.0 [10de/0360] enabled
PCI: 00:01.1 [10de/0368] enabled
PCI: 00:01.2 [10de/036a] enabled
PCI: 00:01.3 [10de/036b] enabled
PCI: 00:02.0 [10de/036c] enabled
PCI: 00:02.1 [10de/036d] enabled
PCI: 00:04.0 [10de/036e] enabled
PCI: 00:05.0 [10de/037f] enabled
PCI: 00:05.1 [10de/037f] enabled
PCI: 00:05.2 [10de/037f] enabled
PCI: 00:06.0 [10de/0370] enabled
PCI: 00:06.1 [10de/0371] enabled
PCI: 00:08.0 [10de/0373] enabled
PCI: 00:0a.0 [10de/0376] enabled
PCI: 00:0b.0 [10de/0374] enabled
PCI: 00:0c.0 [10de/0374] enabled
PCI: 00:0d.0 [10de/0378] enabled
PCI: 00:0e.0 [10de/0375] enabled
PCI: 00:0f.0 [10de/0377] enabled
PNP: 002e.0 disabled
PNP: 002e.1 enabled
PNP: 002e.2 disabled
PNP: 002e.3 disabled
PNP: 002e.4 disabled
PNP: 002e.5 enabled
PNP: 002e.6 enabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled
smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled
smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled
PCI: pci_scan_bus for bus 01
PCI: pci_scan_bus returning with max=001
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [10de/0392] enabled
PCI: pci_scan_bus returning with max=002
PCI: pci_scan_bus for bus 03
PCI: pci_scan_bus returning with max=003
PCI: pci_scan_bus for bus 04
PCI: pci_scan_bus returning with max=004
PCI: pci_scan_bus for bus 05
PCI: pci_scan_bus returning with max=005
PCI: pci_scan_bus for bus 06
PCI: pci_scan_bus returning with max=006
PCI: pci_scan_bus for bus 07
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
PCI: pci_scan_bus returning with max=007
done
Allocating resources...
Reading resources...
PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io
PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem
PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem
PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io
PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem
PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem
PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io
PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem
PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem
PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io
PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem
PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem
PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io
PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem
PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem
PCI: 00:0f.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io
PCI: 00:0f.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem
PCI: 00:0f.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem
Done reading resources.
Allocating VGA resource PCI: 02:00.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0a.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Setting resources...
VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device
PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io <node 0 link 0>
PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem <node 0 link 0>
PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f61fffff] mem <node 0 link 0>
PCI: 00:01.0 14 <- [0x00f6144000 - 0x00f6144fff] mem
PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq
PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io
PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io
PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io
PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io
PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io
PCI: 00:01.3 10 <- [0x00f6100000 - 0x00f613ffff] mem
PCI: 00:02.0 10 <- [0x00f6145000 - 0x00f6145fff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem
PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io
PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io
PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io
PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io
PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io
PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io
PCI: 00:05.0 24 <- [0x00f6146000 - 0x00f6146fff] mem
PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io
PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io
PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io
PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io
PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io
PCI: 00:05.1 24 <- [0x00f6147000 - 0x00f6147fff] mem
PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io
PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io
PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io
PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io
PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io
PCI: 00:05.2 24 <- [0x00f6148000 - 0x00f6148fff] mem
PCI: 00:06.1 10 <- [0x00f6140000 - 0x00f6143fff] mem
PCI: 00:08.0 10 <- [0x00f6149000 - 0x00f6149fff] mem
PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io
PCI: 00:08.0 18 <- [0x00f614b000 - 0x00f614b0ff] mem
PCI: 00:08.0 1c <- [0x00f614c000 - 0x00f614c00f] mem
PCI: 00:0a.0 1c <- [0x0000001000 - 0x0000001fff] bus 02 io
PCI: 00:0a.0 24 <- [0x00e0000000 - 0x00efffffff] bus 02 prefmem
PCI: 00:0a.0 20 <- [0x00f4000000 - 0x00f60fffff] bus 02 mem
PCI: 02:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] mem
PCI: 02:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64
PCI: 02:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] mem64
PCI: 02:00.0 24 <- [0x0000001000 - 0x000000107f] io
PCI: 02:00.0 30 <- [0x00f6000000 - 0x00f601ffff] romem
PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resources...
PCI: 00:18.0 cmd <- 140
PCI: 00:00.0 subsystem <- 1022/2b80
PCI: 00:00.0 cmd <- 146
PCI: 00:01.0 subsystem <- 1022/2b80
PCI: 00:01.0 cmd <- 14f
mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff
mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060
mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064
PCI: 00:01.1 subsystem <- 1022/2b80
PCI: 00:01.1 cmd <- 141
PCI: 00:01.2 cmd <- 540
PCI: 00:01.3 cmd <- 142
PCI: 00:02.0 subsystem <- 1022/2b80
PCI: 00:02.0 cmd <- 142
PCI: 00:02.1 subsystem <- 1022/2b80
PCI: 00:02.1 cmd <- 142
PCI: 00:04.0 subsystem <- 1022/2b80
PCI: 00:04.0 cmd <- 141
PCI: 00:05.0 subsystem <- 1022/2b80
PCI: 00:05.0 cmd <- 143
PCI: 00:05.1 subsystem <- 1022/2b80
PCI: 00:05.1 cmd <- 143
PCI: 00:05.2 subsystem <- 1022/2b80
PCI: 00:05.2 cmd <- 143
PCI: 00:06.0 bridge ctrl <- 0a03
PCI: 00:06.0 cmd <- 144
PCI: 00:06.1 subsystem <- 1022/2b80
PCI: 00:06.1 cmd <- 142
PCI: 00:08.0 subsystem <- 1022/2b80
PCI: 00:08.0 cmd <- 143
PCI: 00:0a.0 bridge ctrl <- 000b
PCI: 00:0a.0 cmd <- 147
PCI: 02:00.0 cmd <- 143
PCI: 00:0b.0 bridge ctrl <- 0003
PCI: 00:0b.0 cmd <- 140
PCI: 00:0c.0 bridge ctrl <- 0003
PCI: 00:0c.0 cmd <- 140
PCI: 00:0d.0 bridge ctrl <- 0003
PCI: 00:0d.0 cmd <- 140
PCI: 00:0e.0 bridge ctrl <- 0003
PCI: 00:0e.0 cmd <- 140
PCI: 00:0f.0 bridge ctrl <- 0003
PCI: 00:0f.0 cmd <- 140
PCI: 00:18.1 subsystem <- 1022/2b80
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 1022/2b80
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
start_eip=0x00005000, offset=0x00110000, code_size=0x0000005b
Final : tsc [0a]=00000008c7a746a0
Initializing CPU #0
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Setting up local apic... apic_id: 0x00 done.
ECC Disabled
CPU #0 Initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
CPU: vendor AMD device 40fb2
CPU: family 0f, model 4b, stepping 02
brandId=08cd
Enabling cache
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
MTRR check
Fixed MTRRs : Enabled
Variable MTRRs: Enabled
Setting up local apic... apic_id: 0x01 done.
CPU #1 Initialized
All AP CPUs stopped
Final : tsc [0b]=00000008d79b33cb
PCI: 00:18.0 init
PCI: 00:01.0 init
set power on after power fail
RTC Init
RTC: Checksum invalid zeroing cmos
Invalid CMOS LB checksum
PNP: 002e.1 init
PNP: 002e.5 init
PNP: 002e.6 init
PCI: 00:01.1 init
PCI: 00:02.1 init
PCI: 00:04.0 init
IDE0
PCI: 00:05.0 init
SATA S SATA P
PCI: 00:05.1 init
SATA S SATA P
PCI: 00:05.2 init
SATA S SATA P
PCI: 00:06.0 init
dev_root mem base = 0x00e0000000
[0x50] <-- 0xe0000000
PCI: 00:06.1 init
base = f6140000
codec_mask = 01
codec viddid: 10ec0883
No verb!
PCI: 00:08.0 init
MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1
PCI: 00:0a.0 init
PCI: 00:0b.0 init
PCI: 00:0c.0 init
PCI: 00:0d.0 init
PCI: 00:0e.0 init
PCI: 00:0f.0 init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:01.2 init
PCI: 00:01.3 init
PCI: 02:00.0 init
rom address for PCI: 02:00.0 = f6000000
copying VGA ROM Image from f6000000 to c0000, ee00 bytes
entering emulator
halt_sys: file /home/ward/lb/yh/freebios2/src/devices/emulator/x86emu/ops.c, line 4387
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 00000274
Adjust low_table_end from 0x00000500 to 0x00001000
Adjust rom_table_end from 0x000f0400 to 0x00100000
Wrote linuxbios table at: 00000500 - 00000db0 checksum bfd7
Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3
rom_stream: 0xfffc0000 - 0xfffdefff
Found ELF candiate at offset 0
New segment addr 0x100000 size 0x3ff20 offset 0xc0 filesize 0x16168
(cleaned up) New segment addr 0x100000 size 0x3ff20 offset 0xc0 filesize 0x16168
New segment addr 0x13ff20 size 0x48 offset 0x16240 filesize 0x48
(cleaned up) New segment addr 0x13ff20 size 0x48 offset 0x16240 filesize 0x48
Dropping non PT_LOAD segment
Dropping non PT_LOAD segment
Loading Segment: addr: 0x000000007ff84000 memsz: 0x000000000003e000 filesz: 0x0000000000016168
Clearing Segment: addr: 0x000000007ff9a168 memsz: 0x0000000000027e98
Loading Segment: addr: 0x000000000013ff20 memsz: 0x0000000000000048 filesz: 0x0000000000000048
Loading Segment: addr: 0x000000000013e000 memsz: 0x0000000000001f20 filesz: 0x0000000000000000
Clearing Segment: addr: 0x000000000013e000 memsz: 0x0000000000001f20
Jumping to boot code at 0x10f768
FILO version 0.5 (ward at neuromancer) Tue Mar 6 14:58:22 EST 2007
collect_sys_info: boot eax = 0xe1fb007
collect_sys_info: boot ebx = 0x7ffe2180
collect_sys_info: boot arg = 0x7ffe2180
malloc_diag: alloc: 0 bytes (0 blocks), free: 16376 bytes (1 blocks)
malloc_diag: alloc: 24 bytes (1 blocks), free: 16352 bytes (1 blocks)
collect_elfboot_info: Bootloader: elfboot
collect_elfboot_info: Version: 1.3
malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks)
collect_linuxbios_info: Searching for LinuxBIOS tables...
find_lb_table: Found canidate at: 00000500
find_lb_table: header checksum o.k.
find_lb_table: table checksum o.k.
find_lb_table: record count o.k.
collect_linuxbios_info: Found LinuxBIOS table at: 00000500
malloc_diag: alloc: 128 bytes (3 blocks), free: 16248 bytes (1 blocks)
convert_memmap: 0x00000000000000 0x00000000001000 16
convert_memmap: 0x00000000001000 0x0000000009f000 1
convert_memmap: 0x000000000c0000 0x00000000030000 1
convert_memmap: 0x000000000f0000 0x00000000010000 16
convert_memmap: 0x00000000100000 0x0000007ff00000 1
collect_sys_info: 0000000000001000-00000000000a0000
collect_sys_info: 00000000000c0000-00000000000f0000
collect_sys_info: 0000000000100000-0000000080000000
collect_sys_info: RAM 2048 MB
relocate: Current location: 0x100000-0x13ff67
relocate: Relocating to 0x7ffc0090-0x7ffffff7... ok
setup_timers: CPU 2000 MHz
pci_init: Scanning PCI: found 25 devices
malloc_diag: alloc: 440 bytes (4 blocks), free: 15936 bytes (1 blocks)
pci_init: 00:00.0 10de:0369 0500 00
pci_init: 00:01.0 10de:0360 0601 00
pci_init: 00:01.1 10de:0368 0c05 00
pci_init: 00:01.2 10de:036a 0500 00
pci_init: 00:01.3 10de:036b 0b40 00
pci_init: 00:02.0 10de:036c 0c03 10
pci_init: 00:02.1 10de:036d 0c03 20
pci_init: 00:04.0 10de:036e 0101 8a
pci_init: 00:05.0 10de:037f 0101 85
pci_init: 00:05.1 10de:037f 0101 85
pci_init: 00:05.2 10de:037f 0101 85
pci_init: 00:06.0 10de:0370 0604 00
pci_init: 00:06.1 10de:0371 0403 00
pci_init: 00:08.0 10de:0373 0680 00
pci_init: 00:0a.0 10de:0376 0604 00
pci_init: 00:0b.0 10de:0374 0604 00
pci_init: 00:0c.0 10de:0374 0604 00
pci_init: 00:0d.0 10de:0378 0604 00
pci_init: 00:0e.0 10de:0375 0604 00
pci_init: 00:0f.0 10de:0377 0604 00
pci_init: 00:18.0 1022:1100 0600 00
pci_init: 00:18.1 1022:1101 0600 00
pci_init: 00:18.2 1022:1102 0600 00
pci_init: 00:18.3 1022:1103 0600 00
pci_init: 02:00.0 10de:0392 0300 00
menu: hde1:/boot/grub/menu.lst
malloc_diag: alloc: 456 bytes (5 blocks), free: 15920 bytes (1 blocks)
file_open: dev=hde1, path=/boot/grub/menu.lst
find_ide_controller: found PCI IDE controller 10de:037f prog_if=0x85
find_ide_controller: primary channel: native PCI mode
find_ide_controller: cmd_base=0x3000 ctrl_base=0x3070
ide_software_reset: Waiting for ide2 to become ready for reset... ok
init_drive: Testing for hde
init_drive: Probing for hde
init_drive: LBA mode, sectors=268435455
init_drive: LBA48 mode, sectors=488397168
init_drive: Init device params... ok
hde: LBA48 250GB: WDC WD2500JS-60NCB1
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
init_drive: Testing for hdf
init_drive: Probing for hdf
print_status: IDE: status=0x0, err=0x0
devopen: Partition 1 start 63 length 476327187
Mounted ext2fs
malloc_diag: alloc: 440 bytes (4 blocks), free: 15936 bytes (1 blocks)
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press `ESC' to enter the menu... 2 Press `ESC' to enter the menu... 1 Press `ESC' to enter the menu... 0 Booting 'Ubuntu LB, kernel 2.6.20.1'
root (hd4,0)
kernel /boot/vmlinuz-2.6.20.1 root=/dev/hde1 ro noapic console=tty0 console=tt
yS0,115200
boot
Booting 'hde1:/boot/vmlinuz-2.6.20.1 root=/dev/hde1 ro noapic console=tty0 cons
ole=ttyS0,115200'
malloc_diag: alloc: 536 bytes (5 blocks), free: 15840 bytes (1 blocks)
malloc_diag: alloc: 552 bytes (6 blocks), free: 15824 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1
devopen: already open
malloc_diag: alloc: 536 bytes (5 blocks), free: 15840 bytes (1 blocks)
elf_load: Not a bootable ELF image
malloc_diag: alloc: 552 bytes (6 blocks), free: 15824 bytes (1 blocks)
file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1
devopen: already open
malloc_diag: alloc: 536 bytes (5 blocks), free: 15840 bytes (1 blocks)
Found Linux version 2.6.20.1 (root at neuromancer) #1 SMP PREEMPT Thu Mar 8 12:14:22 EST 2007 (protocol 0x204) (loadflags 0x1) bzImage.
init_linux_params: Setting up paramters at 0x90000
set_memory_size: 0000000000001000 - 00000000000a0000
set_memory_size: 00000000000c0000 - 00000000000f0000
set_memory_size: 0000000000100000 - 0000000080000000
set_memory_size: ramtop=0x80000000
set_memory_size: ext_mem_k=64512, alt_mem_k=2096128
parse_command_line: original command line: "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200"
parse_command_line: kernel command line at 0x91000
parse_command_line: kernel command line (58 bytes): "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200"
load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1cd437
Loading kernel... ok
start_linux: eip=0x100000
Jumping to entry point...
[ 0.000000] Linux version 2.6.20.1 (root at neuromancer) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Mar 8 12:14:22 EST 2007
[ 0.000000] Command line: root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
[ 0.000000] end_pfn_map = 524288
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI: Unable to locate RSDP
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 1 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 1 -> 160
[ 0.000000] 0: 192 -> 240
[ 0.000000] 0: 256 -> 524288
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: GIGABYTE MPTABLE: Product ID: M57SLI MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] Processor #1
[ 0.000000] I/O APIC #2 at 0xF6144000.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Processors: 2
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000c0000
[ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000)
[ 0.000000] PERCPU: Allocating 32704 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515953
[ 0.000000] Kernel command line: root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 44.821296] Console: colour VGA+ 80x25
[ 45.005114] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 45.013507] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 45.021027] Checking aperture...
[ 45.024310] CPU 0: aperture @ f0000000 size 64 MB
[ 45.043697] Memory: 2060484k/2097152k available (2640k kernel code, 36384k reserved, 1032k data, 232k init)
[ 45.129427] Calibrating delay using timer specific routine.. 4007.33 BogoMIPS (lpj=8014666)
[ 45.137915] Security Framework v1.0.0 initialized
[ 45.142667] SELinux: Disabled at boot.
[ 45.146560] Mount-cache hash table entries: 256
[ 45.151220] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 45.158392] CPU: L2 Cache: 512K (64 bytes/line)
[ 45.162964] CPU: Physical Processor ID: 0
[ 45.167020] CPU: Processor Core ID: 0
[ 45.170748] Freeing SMP alternatives: 28k freed
[ 45.175364] Using local APIC timer interrupts.
[ 45.229761] result 12500073
[ 45.232588] Detected 12.500 MHz APIC timer.
[ 45.237320] Booting processor 1/2 APIC 0x1
[ 45.251717] Initializing CPU#1
[ 45.329047] Calibrating delay using timer specific routine.. 4000.28 BogoMIPS (lpj=8000578)
[ 45.329053] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 45.329055] CPU: L2 Cache: 512K (64 bytes/line)
[ 45.329058] CPU: Physical Processor ID: 0
[ 45.329059] CPU: Processor Core ID: 1
[ 45.329135] AMD Processor model unknown stepping 02
[ 45.333044] CPU 1: Syncing TSC to CPU 0.
[ 45.333140] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 501 cycles)
[ 45.333148] Brought up 2 CPUs
[ 45.383876] testing NMI watchdog ... OK.
[ 45.427899] time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
[ 45.434204] time.c: Detected 2000.009 MHz processor.
[ 46.073920] migration_cost=178
[ 46.077373] NET: Registered protocol family 16
[ 46.082219] PCI: Using configuration type 1
[ 46.087153] ACPI: Interpreter disabled.
[ 46.091044] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 46.096761] pnp: PnP ACPI: disabled
[ 46.100411] SCSI subsystem initialized
[ 46.104276] PCI: Probing PCI hardware
[ 46.109687] PCI: Using IRQ router default [10de/0370] at 0000:00:06.0
[ 46.116544] PCI: Bridge: 0000:00:06.0
[ 46.120276] IO window: disabled.
[ 46.123742] MEM window: disabled.
[ 46.127267] PREFETCH window: disabled.
[ 46.131244] PCI: Bridge: 0000:00:0a.0
[ 46.134962] IO window: 1000-1fff
[ 46.138403] MEM window: f4000000-f60fffff
[ 46.142622] PREFETCH window: e0000000-efffffff
[ 46.147276] PCI: Bridge: 0000:00:0b.0
[ 46.150976] IO window: disabled.
[ 46.154412] MEM window: disabled.
[ 46.157939] PREFETCH window: disabled.
[ 46.161894] PCI: Bridge: 0000:00:0c.0
[ 46.165594] IO window: disabled.
[ 46.169028] MEM window: disabled.
[ 46.172548] PREFETCH window: disabled.
[ 46.176504] PCI: Bridge: 0000:00:0d.0
[ 46.180203] IO window: disabled.
[ 46.183637] MEM window: disabled.
[ 46.187157] PREFETCH window: disabled.
[ 46.191113] PCI: Bridge: 0000:00:0e.0
[ 46.194814] IO window: disabled.
[ 46.198247] MEM window: disabled.
[ 46.201768] PREFETCH window: disabled.
[ 46.205722] PCI: Bridge: 0000:00:0f.0
[ 46.209422] IO window: disabled.
[ 46.212856] MEM window: disabled.
[ 46.216376] PREFETCH window: disabled.
[ 46.220412] NET: Registered protocol family 2
[ 46.259284] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 46.266723] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 46.276114] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 46.283300] TCP: Hash tables configured (established 262144 bind 65536)
[ 46.289947] TCP reno registered
[ 46.303760] audit: initializing netlink socket (disabled)
[ 46.309198] audit(1173376729.192:1): initialized
[ 46.313959] VFS: Disk quotas dquot_6.5.1
[ 46.317934] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 46.324494] io scheduler noop registered
[ 46.328499] io scheduler anticipatory registered (default)
[ 46.334113] io scheduler deadline registered
[ 46.338474] io scheduler cfq registered
[ 46.342704] assign_interrupt_mode Found MSI capability
[ 46.347976] assign_interrupt_mode Found MSI capability
[ 46.353234] assign_interrupt_mode Found MSI capability
[ 46.358492] assign_interrupt_mode Found MSI capability
[ 46.363744] assign_interrupt_mode Found MSI capability
[ 46.369000] assign_interrupt_mode Found MSI capability
[ 46.395466] Linux agpgart interface v0.101 (c) Dave Jones
[ 46.400899] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 46.408780] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 46.415617] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 46.423306] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 46.431724] PCI: No IRQ known for interrupt pin A of device 0000:00:08.0. Please try using pci=biosirq.
[ 46.441153] forcedeth: using HIGHDMA
[ 46.966107] eth0: forcedeth.c: subsystem: 01022:2b80 bound to 0000:00:08.0
[ 46.973012] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 46.979391] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 46.987457] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
[ 46.993581] NFORCE-MCP55: chipset revision 161
[ 46.998055] NFORCE-MCP55: not 100% native mode: will probe irqs later
[ 47.004529] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
[ 47.010744] ide0: BM-DMA at 0x2cc0-0x2cc7, BIOS settings: hda:pio, hdb:pio
[ 47.421143] hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
[ 48.099860] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 48.672426] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
[ 48.680131] Uniform CD-ROM driver Revision: 3.20
[ 48.703366] PCI: No IRQ known for interrupt pin A of device 0000:00:05.0. Please try using pci=biosirq.
[ 48.712812] sata_nv 0000:00:05.0: is not available: No interrupt assigned.
[ 48.719739] PCI: No IRQ known for interrupt pin B of device 0000:00:05.1. Please try using pci=biosirq.
[ 48.729176] sata_nv 0000:00:05.1: is not available: No interrupt assigned.
[ 48.736100] PCI: No IRQ known for interrupt pin C of device 0000:00:05.2. Please try using pci=biosirq.
[ 48.745542] sata_nv 0000:00:05.2: is not available: No interrupt assigned.
[ 48.752539] PNP: No PS/2 controller found. Probing ports directly.
[ 48.758960] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 48.763969] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 48.769142] mice: PS/2 mouse device common for all mice
[ 48.799023] input: AT Translated Set 2 keyboard as /class/input/input0
[ 48.810091] md: raid1 personality registered for level 1
[ 48.815510] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel at redhat.com
[ 48.824148] TCP cubic registered
[ 48.827455] NET: Registered protocol family 1
[ 48.831879] NET: Registered protocol family 8
[ 48.836305] NET: Registered protocol family 20
[ 49.527051] input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
[ 49.568810] md: Autodetecting RAID arrays.
[ 49.572958] md: autorun ...
[ 49.575799] md: ... autorun DONE.
[ 49.579276] VFS: Cannot open root device "hde1" or unknown-block(0,0)
[ 49.585762] Please append a correct "root=" boot option
[ 49.591028] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 49.599332]
-------------- next part --------------
[ 0.000000] Linux version 2.6.20.1 (root at neuromancer) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Mar 8 12:14:22 EST 2007
[ 0.000000] Command line: root=/dev/sda1 ro console=tty0 console=ttyS0,115200 noapic
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524272
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 at 0xFEC00000.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Processors: 2
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:50000000)
[ 0.000000] PERCPU: Allocating 32704 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515887
[ 0.000000] Kernel command line: root=/dev/sda1 ro console=tty0 console=ttyS0,115200 noapic
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 33.722830] Console: colour VGA+ 80x25
[ 33.983599] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 33.991944] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 33.999447] Checking aperture...
[ 34.002700] CPU 0: aperture @ 3ffc000000 size 32 MB
[ 34.007608] Aperture too small (32 MB)
[ 34.016055] No AGP bridge found
[ 34.033400] Memory: 2060028k/2097088k available (2640k kernel code, 36392k reserved, 1032k data, 232k init)
[ 34.119338] Calibrating delay using timer specific routine.. 4023.91 BogoMIPS (lpj=8047839)
[ 34.127794] Security Framework v1.0.0 initialized
[ 34.132535] SELinux: Disabled at boot.
[ 34.136416] Mount-cache hash table entries: 256
[ 34.141061] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 34.148218] CPU: L2 Cache: 512K (64 bytes/line)
[ 34.152780] CPU: Physical Processor ID: 0
[ 34.156822] CPU: Processor Core ID: 0
[ 34.160528] Freeing SMP alternatives: 28k freed
[ 34.165099] ACPI: Core revision 20060707
[ 34.173425] ACPI: setting ELCR to 0200 (from 8c20)
[ 34.179703] Using local APIC timer interrupts.
[ 34.233890] result 12564592
[ 34.236707] Detected 12.564 MHz APIC timer.
[ 34.243338] Booting processor 1/2 APIC 0x1
[ 34.257291] Initializing CPU#1
[ 34.334774] Calibrating delay using timer specific routine.. 4028.18 BogoMIPS (lpj=8056371)
[ 34.334779] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 34.334781] CPU: L2 Cache: 512K (64 bytes/line)
[ 34.334784] CPU: Physical Processor ID: 0
[ 34.334785] CPU: Processor Core ID: 1
[ 34.334858] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
[ 34.338779] CPU 1: Syncing TSC to CPU 0.
[ 34.339293] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 464 cycles)
[ 34.339300] Brought up 2 CPUs
[ 34.391637] testing NMI watchdog ... OK.
[ 34.435642] Disabling vsyscall due to use of PM timer
[ 34.440744] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 34.446523] time.c: Detected 2010.332 MHz processor.
[ 35.074530] migration_cost=159
[ 35.077968] NET: Registered protocol family 16
[ 35.082515] ACPI: bus type pci registered
[ 35.089362] PCI: Using MMCONFIG at f0000000
[ 35.093604] PCI: No mmconfig possible on device 00:18
[ 35.106051] ACPI: Interpreter enabled
[ 35.109757] ACPI: Using PIC for interrupt routing
[ 35.114955] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 35.120405] PCI: Transparent bridge - 0000:00:06.0
[ 35.184111] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 35.192486] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 35.200872] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[ 35.208042] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 35.216490] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 35.224861] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 35.233214] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 *15)
[ 35.240359] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 35.248716] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 35.257083] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 *15)
[ 35.264229] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 35.271370] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 35.278507] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 35.286866] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 35.293999] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 35.301146] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 35.309504] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 *15)
[ 35.316647] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 35.323791] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
[ 35.331015] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 35.337874] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 35.344730] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 35.351590] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 35.358449] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 35.365304] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 35.372166] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 35.379031] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 35.385882] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 35.393654] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 35.401430] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 35.410053] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[ 35.417814] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 35.425582] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 35.433358] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 35.441129] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 35.448902] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 35.456672] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 35.464440] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
[ 35.473974] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 35.479671] pnp: PnP ACPI init
[ 35.487251] pnp: PnP ACPI: found 14 devices
[ 35.491585] SCSI subsystem initialized
[ 35.495446] PCI: Using ACPI for IRQ routing
[ 35.499671] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 35.508489] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
[ 35.515226] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[ 35.521616] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[ 35.527997] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
[ 35.534728] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[ 35.541119] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[ 35.547730] PCI: Bridge: 0000:00:06.0
[ 35.551432] IO window: disabled.
[ 35.554868] MEM window: fb000000-fb0fffff
[ 35.559087] PREFETCH window: disabled.
[ 35.563045] PCI: Bridge: 0000:00:0a.0
[ 35.566743] IO window: 9000-9fff
[ 35.570170] MEM window: f8000000-faffffff
[ 35.574391] PREFETCH window: e0000000-efffffff
[ 35.579074] NET: Registered protocol family 2
[ 35.618327] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 35.625786] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 35.635137] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 35.642331] TCP: Hash tables configured (established 262144 bind 65536)
[ 35.648982] TCP reno registered
[ 35.662884] audit: initializing netlink socket (disabled)
[ 35.668326] audit(1173381674.632:1): initialized
[ 35.673105] VFS: Disk quotas dquot_6.5.1
[ 35.677081] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 35.683643] io scheduler noop registered
[ 35.687643] io scheduler anticipatory registered (default)
[ 35.693245] io scheduler deadline registered
[ 35.697595] io scheduler cfq registered
[ 35.726491] assign_interrupt_mode Found MSI capability
[ 35.754987] Linux agpgart interface v0.101 (c) Dave Jones
[ 35.760425] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 35.768318] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.774875] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 35.781062] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 35.788756] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 35.796602] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5
[ 35.802300] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 5 (level, low) -> IRQ 5
[ 35.810959] forcedeth: using HIGHDMA
[ 36.337993] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:08.0
[ 36.344900] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 36.351287] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 36.359361] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
[ 36.365493] NFORCE-MCP55: chipset revision 161
[ 36.369974] NFORCE-MCP55: not 100% native mode: will probe irqs later
[ 36.376446] NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround.
[ 36.384229] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
[ 36.390441] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 37.137225] hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
[ 37.816879] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 38.384713] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
[ 38.392317] Uniform CD-ROM driver Revision: 3.20
[ 38.415656] ACPI: PCI Interrupt Link [LSID] enabled at IRQ 15
[ 38.421443] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSID] -> GSI 15 (level, low) -> IRQ 15
[ 38.430324] ata1: SATA max UDMA/133 cmd 0xA400 ctl 0xA802 bmdma 0xB400 irq 15
[ 38.437510] ata2: SATA max UDMA/133 cmd 0xAC00 ctl 0xB002 bmdma 0xB408 irq 15
[ 38.444680] scsi0 : sata_nv
[ 38.915854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 38.931921] ata1.00: ATA-7, max UDMA/100, 488397168 sectors: LBA48 NCQ (depth 0/32)
[ 38.939617] ata1.00: ata1: dev 0 multi count 16
[ 38.955899] ata1.00: configured for UDMA/100
[ 38.960211] scsi1 : sata_nv
[ 39.275575] ata2: SATA link down (SStatus 0 SControl 300)
[ 39.291280] ATA: abnormal status 0x7F on port 0xAC07
[ 39.296337] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-60N 10.0 PQ: 0 ANSI: 5
[ 39.304537] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 39.311278] sda: Write Protect is off
[ 39.315020] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.324057] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 39.330794] sda: Write Protect is off
[ 39.334502] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 39.343503] sda: sda1 sda2 < sda5 >
[ 39.391501] sd 0:0:0:0: Attached scsi disk sda
[ 39.396038] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 39.401671] ACPI: PCI Interrupt Link [LFID] enabled at IRQ 10
[ 39.407455] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LFID] -> GSI 10 (level, low) -> IRQ 10
[ 39.416321] ata3: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma 0xC800 irq 10
[ 39.423513] ata4: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xC808 irq 10
[ 39.430688] scsi2 : sata_nv
[ 39.747232] ata3: SATA link down (SStatus 0 SControl 300)
[ 39.762935] ATA: abnormal status 0x7F on port 0xB807
[ 39.767937] scsi3 : sata_nv
[ 40.082986] ata4: SATA link down (SStatus 0 SControl 300)
[ 40.098682] ATA: abnormal status 0x7F on port 0xC007
[ 40.103928] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 11
[ 40.109716] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 11 (level, low) -> IRQ 11
[ 40.118568] ata5: SATA max UDMA/133 cmd 0xCC00 ctl 0xD002 bmdma 0xDC00 irq 11
[ 40.125753] ata6: SATA max UDMA/133 cmd 0xD400 ctl 0xD802 bmdma 0xDC08 irq 11
[ 40.132927] scsi4 : sata_nv
[ 40.450718] ata5: SATA link down (SStatus 0 SControl 300)
[ 40.466416] ATA: abnormal status 0x7F on port 0xCC07
[ 40.471416] scsi5 : sata_nv
[ 40.786473] ata6: SATA link down (SStatus 0 SControl 300)
[ 40.802174] ATA: abnormal status 0x7F on port 0xD407
[ 40.807248] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 40.815067] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 40.820109] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 40.825273] mice: PS/2 mouse device common for all mice
[ 40.855250] input: AT Translated Set 2 keyboard as /class/input/input0
[ 40.866239] md: raid1 personality registered for level 1
[ 40.871636] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel at redhat.com
[ 40.880230] TCP cubic registered
[ 40.883501] NET: Registered protocol family 1
[ 40.887899] NET: Registered protocol family 8
[ 40.892294] NET: Registered protocol family 20
[ 41.565674] input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
[ 41.625915] md: Autodetecting RAID arrays.
[ 41.630045] md: autorun ...
[ 41.632873] md: ... autorun DONE.
[ 41.662104] kjournald starting. Commit interval 5 seconds
[ 41.667629] EXT3-fs: mounted filesystem with ordered data mode.
[ 41.673609] VFS: Mounted root (ext3 filesystem) readonly.
[ 41.679084] Freeing unused kernel memory: 232k freed
* INIT: version 2.86 booting
* Reading files needed to boot... [ ok ]
* Preparing restricted drivers... [ ok ]
* Starting basic networking... [ ok ]
* Starting kernel event manager... [ ok ]
* Loading hardware drivers... [ 47.992470] usbcore: registered new interface driver usbfs
[ 47.999146] usbcore: registered new interface driver hub
[ 48.004681] usbcore: registered new device driver usb
[ 48.017117] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 48.023216] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c80
[ 48.035240] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
[ 48.041763] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 5 (level, low) -> IRQ 5
[ 48.050672] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 48.056654] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 48.056969] Floppy drive(s): fd0 is 1.44M
[ 48.068473] ehci_hcd 0000:00:02.1: debug port 4
[ 48.073185] ehci_hcd 0000:00:02.1: irq 5, io mem 0xfb106000
[ 48.078990] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 48.086886] input: PC Speaker as /class/input/input2
[ 48.088452] usb usb1: configuration #1 chosen from 1 choice
[ 48.088801] hub 1-0:1.0: USB hub found
[ 48.088808] hub 1-0:1.0: 10 ports detected
[ 48.112576] FDC 0 is a post-1991 82077
[ 48.133297] parport: PnPBIOS parport detected.
[ 48.137971] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 48.144834] Real Time Clock Driver v1.12ac
[ 48.181730] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 48.193439] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 15
[ 48.199431] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 15 (level, low) -> IRQ 15
[ 48.208508] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 48.213967] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 48.221640] ohci_hcd 0000:00:02.0: irq 15, io mem 0xfb105000
[ 48.287012] usb usb2: configuration #1 chosen from 1 choice
[ 48.292814] hub 2-0:1.0: USB hub found
[ 48.296735] hub 2-0:1.0: 10 ports detected
[ 48.408988] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 48.417282] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 10
[ 48.423287] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNK3] -> GSI 10 (level, low) -> IRQ 10
[ 48.482716] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[fb004000-fb0047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 48.495016] NET: Registered protocol family 17
[ 48.857578] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
[ 48.863551] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 11 (level, low) -> IRQ 11
[ 49.080349] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ ok ]
* Starting PCMCIA services... * PCMCIA not present
* Loading manual drivers... [ ok ]
[ 49.601309] Adding 6032368k swap on /dev/sda5. Priority:-1 extents:1 across:6032368k
* Checking root file system... /dev/sda1: clean, 161226/29786112 files, 1660557/59540898 blocks
[ ok ]
[ 49.641428] EXT3 FS on sda1, internal journal
* Starting RAID devices... [ ok ]
* Setting up LVM Volume Groups... [ ok ]
* Starting Enterprise Volume Management System... [ 50.927875] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 50.935555] device-mapper: ioctl: error adding target to table
[ 50.943019] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 50.950695] device-mapper: ioctl: error adding target to table
[ 50.956990] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 50.964666] device-mapper: ioctl: error adding target to table
[ 50.970941] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 50.978620] device-mapper: ioctl: error adding target to table
[ 50.984876] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 50.992555] device-mapper: ioctl: error adding target to table
[ 50.998790] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 51.006455] device-mapper: ioctl: error adding target to table
[ 51.012711] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 51.020388] device-mapper: ioctl: error adding target to table
[ 51.026611] device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
[ 51.034271] device-mapper: ioctl: error adding target to table
[ ok ]
* Checking all filesystems... [ ok ]
* Configuring network interfaces... [ ok ]
[ 51.614555] NET: Registered protocol family 10
[ 51.619254] lo: Disabled Privacy Extensions
* INIT: Entering runlevel: 2
* Loading ACPI modules... [ ok ]
* Starting ACPI services... [ ok ]
* Starting system log... [ ok ]
* Starting kernel log... [ ok ]
* Starting GNOME Display Manager... [ ok ]
* Starting HP Linux Printing and Imaging System [ ok ]
* Starting Common Unix Printing System: cupsd * Starting system message bus dbus [ ok ]
* Starting Hardware abstraction layer hald [ ok ]
* Starting powernowd... [ ok ]
* Starting OpenBSD Secure Shell server... [ ok ]
* Starting Bluetooth services... hcid sdpd[ 60.315351] Bluetooth: Core ver 2.11
[ 60.319101] NET: Registered protocol family 31
[ 60.323684] Bluetooth: HCI device and connection manager initialized
[ 60.330240] Bluetooth: HCI socket layer initialized
[ 60.407005] Bluetooth: L2CAP ver 2.8
[ 60.410732] Bluetooth: L2CAP socket layer initialized
[ 60.746208] Bluetooth: RFCOMM socket layer initialized
[ 60.751030] Bluetooth: RFCOMM TTY layer initialized
[ 60.755560] Bluetooth: RFCOMM ver 1.8
[ ok ]
* Starting RAID monitoring services... [ ok ]
* Starting anac(h)ronistic cron: anacron [ ok ]
* Starting deferred execution scheduler... [ ok ]
* Starting periodic command scheduler... [ ok ]
* Checking battery state... [ ok ]
* Running local boot scripts (/etc/rc.local) [ ok ]
More information about the coreboot
mailing list