[LinuxBIOS] Question about raminit.c

[joe at smittys.pointclark.net]

Is SPD detection done though the memory controller or through the  
superIO via the SMBUS (i2c)?

Thanks - Joe

Quoting Peter Stuge <stuge-linuxbios at cdy.org>:

> On Fri, May 04, 2007 at 01:37:20AM -0400, joe at smittys.pointclark.net wrote:
>> Or, does it have to set the register values just enough to get
>> going so it can then detect spd?
>
> Probably true, the SPD EEPROM is on the RAM module itself so at least
> some part of the memory controller may need to be working to reach
> it.
>
>
> //Peter
>
> --
> linuxbios mailing list
> linuxbios at linuxbios.org
> http://www.linuxbios.org/mailman/listinfo/linuxbios
>
>