[LinuxBIOS] [PATCH] Fix Asus p2b and bitworks ims targets

[roger]

On Tue, 2007-05-08 at 17:03 -0400, Corey Osgood wrote:
> This patch uses auto.c from Uwe's tyan s1846 for both boards, with some
> minor changes, to bring them up to par. It also should remove (but might
> just clean out) the irq_tables.c from both boards, because they were
> just copied from Via Epia to begin with, and weren't usable. As far as I
> can tell, these are the only changes needed to the targets for now,
> aside from fixups to reset.c when the time comes. Both have been build
> tested, but not checked on hardware since I don't have it. I have left
> Uwe as the copyright holder since the only changes I've made are trivial.
> 
> Signed-off-by: Corey Osgood <corey_osgood at verizon.net>

patched ok here.

can i ack too?

(Working tyan/s1846 all day & with asus/p2b tonight trying to get this
stupid DFI P2BXL 440bx output something on serial. :-/ )

--
Roger
http://www.eskimo.com/~roger/index.html
Key fingerprint = 8977 A252 2623 F567 70CD 1261 640F C963 1005 1D61

Tue May 8 23:02:08 PDT 2007