[LinuxBIOS] MSI interrupts

Thomas Ekstrand thomas.ekstrand at gmail.com
Thu May 31 12:17:24 CEST 2007


1. custom board based on the broadcom blast.
2. via PCIX bridge internally in the ht2000

Thomas

2007/5/30, yhlu <yinghailu at gmail.com>:
> 1. Blast based, what doesn't mean?
> 2. your broadcom is PCIX or PCI-E?
>
> YH
>
> On 5/30/07, Thomas Ekstrand <thomas.ekstrand at gmail.com> wrote:
> > Hi!
> >
> > I have this error:
> > --snip--
> > tg3: eth0: No interrupt was generated using MSI, switching to INTx mode. Please
> > report this failure to the PCI maintainer and include system chipset
> > information.
> > tg3: eth1: No interrupt was generated using MSI, switching to INTx mode. Please
> > report this failure to the PCI maintainer and include system chipset
> > information.
> > --snip--
> >
> > How can I get the interrupt to go through MSI?
> > Currently there are no interrupts at all.
> > I'm running on broadcom blast based board with the bcm5780/5785 chipset
> >
> > regards
> > Thomas
> >
> > --
> > linuxbios mailing list
> > linuxbios at linuxbios.org
> > http://www.linuxbios.org/mailman/listinfo/linuxbios
> >
>




More information about the coreboot mailing list