[LinuxBIOS] Setup of Memory Controller

[Myles Watson]

>  Im currently looking at the resourcemap.c for the tyan s2891 and looking at
> simply changing the hex value for the DRAM Limit and Base address for offset
> 44 and 40 to point to node 1 rather than node 0 and cross my fingers.

I've been wondering what would happen if I did that too.  I was
worried that it would try to send coherent packets if it thought the
region mapped to DRAM on another node.

>
>  I should receive my biossavior tomorrow and commence testing over the
> break.
>

I'll be interested to see how it turns out for you.

Myles