[LinuxBIOS] Interesting.
Feng, Libo
Libo.Feng at amd.com
Fri Nov 30 06:25:31 CET 2007
Hi, all,
But the function init_cpus is called before the three functions: w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); The trace is sent out from the init_cpus.
Best Regards
丰立波 Feng Libo @ AMD Ext: 20906
Mobile Phone: 13683249071
Office Phone: 0086-010-62801406
-----Original Message-----
From: Marc Jones [mailto:marc.jones at amd.com]
Sent: Friday, November 30, 2007 12:47 AM
To: Feng, Libo
Cc: linuxbios
Subject: Re: [LinuxBIOS] Interesting.
Feng, Libo wrote:
>
> Hi, all,
>
> In our board, we found the trace is sent out: "Issuing SOFT_RESET…"
> from the function init_cpus in the file init_cpus.c. But when the
> function runs, the serial port is still far to be initialized, how
> dose the trace is sent out?
>
> Best Regards
>
> 丰立波 Feng Libo @ AMD Ext: 20906
> Mobile Phone: 13683249071
> Office Phone: 0086-010-62801406
>
Each mainboard usually has an early uart setup located in auto.c or cache_as_ram_auto.c.
For example the Serengeti-Cheetah has the following lines.
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init();
Marc
--
Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com
http://www.amd.com/embeddedprocessors
More information about the coreboot
mailing list