[LinuxBIOS] [BUILDROM] Clean up some files that are no longer needed or never used

Jordan Crouse jordan.crouse at amd.com
Tue Oct 2 22:00:34 CEST 2007


I was going through buildrom today, and found some files that are not useful
to us, so this patch removes them.

-- 
Jordan Crouse
Systems Software Development Engineer 
Advanced Micro Devices, Inc.
-------------- next part --------------
[BUILDROM] Clean up some files that are no longer needed or never used

Remove files that snuck in there by mistake or are no longer needed.

Signed-off-by: Jordan Crouse <jordan.crouse at amd.com>
Index: buildrom-devel/packages/bin/README
===================================================================
--- buildrom-devel.orig/packages/bin/README	2007-10-03 11:47:24.000000000 -0600
+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
@@ -1,4 +0,0 @@
-This directory contains the binary bits that make up various parts of the 
-ROM:
-
-olpc_vsa.64k.bin - VSA code for the ROM.  Stored from 32k to 64k in the ROM.
Index: buildrom-devel/packages/bin/README.md5sums
===================================================================
--- buildrom-devel.orig/packages/bin/README.md5sums	2007-10-03 11:47:24.000000000 -0600
+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
@@ -1 +0,0 @@
-fdf7a6ed9f3d27b901b87e30dce5a14d  olpc_vsa.64k.bin
Index: buildrom-devel/packages/nanox/conf/defconfig
===================================================================
--- buildrom-devel.orig/packages/nanox/conf/defconfig	2007-10-03 11:45:19.000000000 -0600
+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
@@ -1,386 +0,0 @@
-####################################################################
-# Microwindows and Nano-X configuration file
-#
-# This package can be configured to run on Linux (MIPS, ARM, POWERPC or x86)
-# UNIX, ELKS, DJGPP, or RTEMS.
-# On Linux, we've got drivers for Linux 2.x framebuffers, X11, or,
-# svgalib for VGA hardware.
-# In addition, a gpm or direct serial mouse driver can be configured.
-# On ELKS, the bios screen driver and serial mouse driver are always used.
-#
-# Either Microwindows and/or Nano-X can be built.
-# Microwindows and Nano-X have several demos.
-#
-# For MSDOS makes, see mcmwin.mak and mcnanox.mak
-####################################################################
-
-####################################################################
-#
-# build target platform
-#
-# Valid ARCH values are:
-#
-# LINUX-NATIVE
-# LINUX-TCC
-# LINUX-ARM
-# LINUX-MIPS
-# LINUX-POWERPC (BIGENDIAN=Y)
-# LINUX-SPARC (BIGENDIAN=Y)
-# LINUX-SH
-# FREEBSD-X86
-# SOLARIS (BIGENDIAN=Y)
-# TRIMEDIA
-# RTEMS
-# DJGPP
-# ELKS
-#
-# note: ELKS can't build client/server nano-X, nor widget lib
-#
-####################################################################
-ARCH                     = LINUX-NATIVE
-BIGENDIAN                = N
-NATIVETOOLSPREFIX        = 
-ARMTOOLSPREFIX           = arm-linux-
-MIPSTOOLSPREFIX          = mipsel-linux-
-POWERPCTOOLSPREFIX       = powerpc-linux-
-SHTOOLSPREFIX            = sh-linux-gnu
-RTEMSTOOLSPREFIX         = i386-rtemself-
-
-####################################################################
-#
-# Compiling options
-#
-####################################################################
-OPTIMIZE                 = Y
-DEBUG                    = N
-VERBOSE                  = Y
-THREADSAFE               = N
-
-####################################################################
-#
-# Libraries to build: microwin, nano-X, nanowidget, object frameworks
-#
-####################################################################
-MICROWIN                 = N
-NANOX                    = Y
-SHAREDLIBS               = N
-OBJFRAMEWORK             = N
-
-
-####################################################################
-#
-# Demos to build
-#
-####################################################################
-MICROWINDEMO             = N
-NANOXDEMO                = N
-
-####################################################################
-#
-# Applications to build
-#
-####################################################################
-NANOWM                   = N
-
-####################################################################
-#
-# The pixeltype of the native hardware or underlying graphics library.
-# This definition defines the PIXELVAL to be 32, 16 or 8 bits wide.
-# If using Linux framebuffer, set to MWPF_TRUECOLOR0888, and use fbset.
-# It also enables GdArea/GrArea for this particular pixel packing format.
-#
-# define MWPF_PALETTE       /* pixel is packed 8 bits 1, 4 or 8 pal index*/
-# define MWPF_TRUECOLOR8888 /* pixel is packed 32 bits 8/8/8/8 truecolor w/alpha*/
-# define MWPF_TRUECOLOR0888 /* pixel is packed 32 bits 8/8/8 truecolor*/
-# define MWPF_TRUECOLOR888  /* pixel is packed 24 bits 8/8/8 truecolor*/
-# define MWPF_TRUECOLOR565  /* pixel is packed 16 bits 5/6/5 truecolor*/
-# define MWPF_TRUECOLOR555  /* pixel is packed 16 bits 5/5/5 truecolor*/
-# define MWPF_TRUECOLOR332  /* pixel is packed 8 bits 3/3/2 truecolor*/
-#
-####################################################################
-#SCREEN_PIXTYPE           = MWPF_TRUECOLOR0888
-SCREEN_PIXTYPE		  = MWPF_TRUECOLOR565
-
-####################################################################
-#
-# NanoX: Put Y to the following line to link the nano-X application
-# with the server.  This is required for ELKS, if no network is present,
-# or for speed or debugging.  This affects the nano-X server only.
-#
-####################################################################
-LINK_APP_INTO_SERVER     = Y
-
-####################################################################
-# Shared memory support for Nano-X client/server protocol speedup
-####################################################################
-HAVE_SHAREDMEM_SUPPORT   = N
-
-####################################################################
-#
-# File I/O support
-# Supporting either below drags in libc stdio, which may not be wanted
-#
-####################################################################
-HAVE_FILEIO              = Y
-
-####################################################################
-# BMP, GIF reading support
-####################################################################
-HAVE_BMP_SUPPORT         = N
-HAVE_GIF_SUPPORT         = N
-HAVE_PNM_SUPPORT         = Y
-HAVE_XPM_SUPPORT         = N
-
-####################################################################
-# JPEG support through libjpeg, see README.txt in contrib/jpeg
-####################################################################
-HAVE_JPEG_SUPPORT        = N
-INCJPEG                  = .
-LIBJPEG                  = /usr/lib/libjpeg.a
-
-####################################################################
-# PNG support via libpng and libz
-####################################################################
-HAVE_PNG_SUPPORT         = N
-INCPNG                   = .
-LIBPNG                   = /usr/lib/libpng.a
-LIBZ                     = /usr/lib/libz.a
-
-####################################################################
-# TIFF support through libtiff
-####################################################################
-HAVE_TIFF_SUPPORT        = N
-INCTIFF                  = .
-LIBTIFF                  = /usr/lib/libtiff.a
-
-####################################################################
-# native .fnt loadable font support
-####################################################################
-HAVE_FNT_SUPPORT         = N
-HAVE_FNTGZ_SUPPORT       = N
-FNT_FONT_DIR             = "fonts/bdf"
-
-####################################################################
-# T1 adobe type1 font support thru t1lib
-####################################################################
-HAVE_T1LIB_SUPPORT       = N
-INCT1LIB                 = .
-LIBT1LIB                 = /usr/local/lib/libt1.a
-
-####################################################################
-# TrueType font support thru FreeType 1.x
-####################################################################
-HAVE_FREETYPE_SUPPORT    = N
-INCFTLIB                 = /usr/include/freetype1
-LIBFTLIB                 = /usr/lib/libttf.so
-FREETYPE_FONT_DIR        = "fonts/truetype"
-
-####################################################################
-# Support for many kinds of font thru FreeType 2.x
-# Must also set FREETYPE_FONT_DIR in the Freetype 1.x section
-####################################################################
-HAVE_FREETYPE_2_SUPPORT  = N
-INCFT2LIB                = .
-LIBFT2LIB                = /usr/lib/libfreetype.a
-
-####################################################################
-# PCF font support 
-# Selecting HAVE_PCFGZ_SUPPORT will allow you to directly read
-# .pcf.gz files, but it will add libz to the size of the server
-####################################################################
-HAVE_PCF_SUPPORT         = N
-HAVE_PCFGZ_SUPPORT       = N
-PCF_FONT_DIR             = "fonts/pcf"
-
-####################################################################
-# Chinese Han Zi Ku loadable font support
-####################################################################
-HAVE_HZK_SUPPORT         = N
-HZK_FONT_DIR             = "fonts/chinese"
-
-####################################################################
-# Chinese BIG5 compiled in font support (big5font.c)
-####################################################################
-HAVE_BIG5_SUPPORT        = N
-
-####################################################################
-# Chinese GB2312 compiled in font support (gb2312font.c)
-####################################################################
-HAVE_GB2312_SUPPORT      = N
-
-####################################################################
-# Japanese JISX0213 compiled in font support (jisx0213-12x12.c)
-####################################################################
-HAVE_JISX0213_SUPPORT    = N
-
-####################################################################
-# Korean HANGUL font support (jo16x16.c)
-####################################################################
-HAVE_KSC5601_SUPPORT     = N
-
-####################################################################
-# Japanese EUC-JP support using loadable MGL font
-####################################################################
-HAVE_EUCJP_SUPPORT       = N
-EUCJP_FONT_DIR           = "fonts/japanese"
-
-####################################################################
-# Generate screen driver interface only with no fonts or clipping
-####################################################################
-NOFONTSORCLIPPING        = N
-
-####################################################################
-#
-# Window move algorithms for Microwindows
-# Change for tradeoff between cpu speed and looks
-# ERASEMOVE repaints only backgrounds while window dragging, quicker.
-# Otherwise an XOR redraw is used for window moves only after button up,
-# quickest (should set for ELKS)
-# UPDATEREGIONS paints in update clipping region only for better look and feel
-#
-####################################################################
-ERASEMOVE                = Y
-UPDATEREGIONS            = Y
-
-####################################################################
-#
-# Link with Gray Palette (valid only for 4bpp modes)
-#
-####################################################################
-GRAYPALETTE              = N
-
-####################################################################
-#
-# If the platform is running UNIX, Linux or RTEMS...
-#
-####################################################################
-ifneq ($(ARCH), ELKS)
-
-# X Window screen, mouse and kbd drivers
-X11                      = N
-
-ifeq ($(X11), Y)
-# startup screen width, height, (depth for palette mode only)
-SCREEN_WIDTH             = 800
-SCREEN_HEIGHT            = 600
-SCREEN_DEPTH             = 4 
-
-# You may want to turn this on for XFree86 4.x or if your backing store
-# isn't functioning properly
-USE_EXPOSURE		 = Y
-
-else
-
-# framebuffer screen driver (linear and/or vga 4 planes)
-# set VTSWITCH to include virtual terminal switch code
-# set FBREVERSE to reverse bit orders in 1,2,4 bpp
-# set FBVGA=N for all systems without VGA hardware (for MIPS must=N)
-FRAMEBUFFER              = Y
-FBVGA                    = N
-VTSWITCH                 = N
-FBREVERSE                = N
-
-# set HAVETEXTMODE=Y for systems that can switch between text & graphics.
-# On a graphics-only embedded system, such as Osprey and Embedded
-# Planet boards, set HAVETEXTMODE=N
-HAVETEXTMODE             = Y
-
-# svgalib screen driver
-VGALIB                   = N
-
-# direct VGA hardware access screen driver
-HWVGA                    = N
-
-####################################################################
-# Mouse drivers
-# GPMMOUSE	gpm mouse
-# SERMOUSE	serial Microsoft, PC, Logitech, PS/2 mice (/dev/psaux)
-# SUNMOUSE	Sun Workstation mouse (/dev/sunmouse)
-# NOMOUSE	no mouse driver
-#
-# Touchscreen drivers
-# IPAQMOUSE	Compaq iPAQ, Intel Assabet (/dev/h3600_tsraw)
-# ZAURUSMOUSE	Sharp Zaurus (/dev/sharp_ts)
-# TUXMOUSE	TuxScreen (/dev/ucb1x00-ts)
-# ADSMOUSE	Applied Data Systems GC+ (/dev/ts)
-# ADS7846MOUSE	        ADS7846 chip, PSI OMAP Innovator (/dev/innnovator_ts)
-# EPMOUSE	Embedded Planet (/dev/tpanel)
-# VHMOUSE	Vtech Helio (/dev/tpanel)
-# MTMOUSE	MicroTouch serial (/dev/ttyS1)
-# PSIONMOUSE	Psion 5 (/dev/touch_psion)
-# YOPYMOUSE	Yopy (/dev/yopy-ts)
-# HARRIERMOUSE	NEC Harrier (/dev/tpanel)
-####################################################################
-GPMMOUSE                 = N
-SERMOUSE                 = N
-SUNMOUSE                 = N
-NOMOUSE                  = Y
-IPAQMOUSE                = N
-ZAURUSMOUSE              = N
-TUXMOUSE                 = N
-ADSMOUSE                 = N
-ADS7846MOUSE             = N
-EPMOUSE                  = N
-VHMOUSE                  = N
-MTMOUSE                  = N
-PSIONMOUSE               = N
-YOPYMOUSE                = N
-HARRIERMOUSE             = N
-LIRCMOUSE                = N
-
-# keyboard or null kbd driver
-TTYKBD                   = Y
-SCANKBD                  = N
-PIPEKBD                  = N
-IPAQKBD                  = N
-LIRCKBD                  = N
-NOKBD                    = N
-
-endif
-
-# Secondary keyboard drivers.
-# You may have a normal keyboard driver in addition to these
-# drivers, e.g. for both normal keyboard and IR input.
-LIRCKBD2                 = N
-
-####################################################################
-# Screen driver specific configuration
-# SA1100_LCD_LTLEND 4bpp driver with arm SA1100 LCD controller
-# INVERT4BPP 4bpp inverted pixel driver for VTech Helio
-####################################################################
-SA1100_LCD_LTLEND        = N
-INVERT4BPP               = N
-
-####################################################################
-#
-# If the platform is a RTEMS box ....
-#
-####################################################################
-ifeq ($(ARCH), RTEMS)
-
-# Location & BSP information of the RTEMS build
-RTEMS_BUILD              = /tools/build-i386-elf-rtems
-RTEMS_BSP                = pc386
-LINK_APP_INTO_SERVER     = Y
-
-endif
-
-endif
-
-####################################################################
-#
-# If the platform is an ELKS box ...
-#
-####################################################################
-ifeq ($(ARCH), ELKS)
-
-# Higher speed asm driver, c driver of hercules screen driver
-ASMVGADRIVER             = Y
-CVGADRIVER               = N
-HERCDRIVER               = N
-DBGDRIVER                = N
-
-# Mouse support
-SERMOUSE                 = Y
-
-endif


More information about the coreboot mailing list