[LinuxBIOS] [PATCH] Call for help: superiotool
rasmus at wiman.org
Fri Oct 5 15:32:43 CEST 2007
Uwe Hermann <uwe at hermann-uwe.de> wrote:
> If you want to, feel free to grab the datasheet and add dump support.
> Nothing complex, just a bit time-consuming...
Not so time-consuming for an unemployed guy like me. A few questions,
though. I am not sure how I am supposed to use the constants NANA, RSVD
and MISC, as defined in superiotool.h. I marked the default for global
CR 07 and 21 as NANA, but 07 is logical device number and msd of 21 is
supposedly always 1 and lsd is chip revision id, on my HF it is 7. For
24 the datasheet says "Default 0b1s000s0s", a notation I'm unfamiliar
with, so I set the default to MISC. This is very likely the wrong way
to do it. Also, a few registers are specified as "reserved" or
"Test:Reserver for winbond", but they provide a default, so I entered
Also, I only grabbed the W83627HF/F datasheet, I think there was a HG/G
sheet available too.
Geek for hire
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 1913 bytes
Desc: not available
More information about the coreboot