[LinuxBIOS] r2833 - trunk/util/superiotool

svn at openbios.org svn at openbios.org
Sun Oct 7 21:04:26 CEST 2007


Author: uwe
Date: 2007-10-07 21:04:26 +0200 (Sun, 07 Oct 2007)
New Revision: 2833

Modified:
   trunk/util/superiotool/winbond.c
Log:
Add dump support for the Winbond W83627THF/THG.

Signed-off-by: David Hendricks <david.hendricks at gmail.com>
Acked-by: Peter Stuge <peter at stuge.se>
Acked-by: Uwe Hermann <uwe at hermann-uwe.de>



Modified: trunk/util/superiotool/winbond.c
===================================================================
--- trunk/util/superiotool/winbond.c	2007-10-07 15:26:40 UTC (rev 2832)
+++ trunk/util/superiotool/winbond.c	2007-10-07 19:04:26 UTC (rev 2833)
@@ -97,6 +97,49 @@
 	{0x708, "W83637HF/HG", {
 		{EOT}}},
 	{0x828, "W83627THF/THG", { /* We assume rev is bits 3..0 of 0x21. */
+		{NOLDN, NULL,
+			{0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x29,0x2a,
+			 0x2b,0x2c,0x2d,0x2e,0x2f,EOT},
+			{0x82,NANA,0xff,0x00,MISC,0x00,MISC,0x00,0x00,0x00,
+			 MISC,MISC,MISC,0x00,0x00,EOT}},
+		/* Some register defaults depend on the value of PNPCSV. */
+		{0x0, "Floppy",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,0xf2,0xf4,
+			 0xf5,EOT},
+			{0x01,0x03,0xf0,0x06,0x02,0x0e,0x00,0xff,0x00,
+			 0x00,EOT}},
+		{0x1, "Parallel port",
+			{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
+			{0x01,0x03,0x78,0x07,0x04,0x3f,EOT}},
+		{0x2, "COM1",
+			{0x30,0x60,0x61,0x70,0xf0,EOT},
+			{0x01,0x03,0xf8,0x04,0x00,EOT}},
+		{0x3, "COM2",
+			{0x30,0x60,0x61,0x70,0xf0,0xf1,EOT},
+			{0x01,0x02,0xf8,0x03,0x00,0x00,EOT}},
+		{0x5, "Keyboard",
+			{0x30,0x60,0x61,0x62,0x63,0x70,0x72,0xf0,EOT},
+			{0x01,0x00,0x60,0x00,0x64,0x01,0x0c,0x80,EOT}},
+		{0x7, "GPIO 1, GPIO 5, game port, MIDI port",
+			{0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,0xf3,
+			 0xf4,0xf5,EOT},
+			{0x00,0x02,0x01,0x03,0x30,0x09,0xff,0x00,0x00,0xff,
+			 0x00,0x00,EOT}},
+		{0x8, "GPIO 2",
+			{0x30,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,EOT},
+			{0x00,0xff,0x00,0x00,0x00,RSVD,0x00,0x00,0x00,EOT}},
+		{0x9, "GPIO 3, GPIO 4",
+			{0x30,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,EOT},
+			{0x00,0xff,0x00,0x00,0x00,0xff,0x00,0x00,EOT}},
+		{0xa, "ACPI",
+			/* Note: Datasheet says 0xe2 can't be read/written. */
+			{0x30,0x70,0xe0,0xe1,0xe2,0xe3,0xe4,0xe5,0xe6,0xe7,
+			 0xf0,0xf1,0xf3,0xf4,0xf6,0xf7,0xf9,0xfe,0xff,EOT},
+			{0x00,0x00,0x00,0x00,MISC,MISC,0x00,0x00,0x00,0x00,
+			 0x00,0x00,0x00,0x00,0x00,0x00,0x00,RSVD,RSVD,EOT}},
+		{0xb, "Hardware monitor",
+			{0x30,0x60,0x61,0x70,EOT},
+			{0x00,0x00,0x00,0x00,EOT}},
 		{EOT}}},
 #if 0
 	{0x85x, "W83687THF", {	/* TODO: sensors-detect: 0x85 */





More information about the coreboot mailing list