[LinuxBIOS] [IMPORT] GIGABYTE GA-2761GXDK

Morgan Tsai my_tsai at sis.com
Fri Oct 12 10:35:21 CEST 2007


Dear Corey,

I used manually partition, only /dev/sda1 for root '/' and /dev/sda2 for 
swap, no lvm.
Thanks for your idea.   :)


Morgan

----- Original Message ----- 
From: "Corey Osgood" <corey.osgood at gmail.com>
To: "Morgan Tsai" <my_tsai at sis.com>
Cc: "ron minnich" <rminnich at gmail.com>; "Uwe Hermann" <uwe at hermann-uwe.de>; 
"Russell Whitaker" <russ at ashlandhome.net>; "Dennis Chang /SiS" 
<ktchang at sis.com>; "Eric Lin" <ericlin at sis.com>; <linuxbios at linuxbios.org>
Sent: Friday, October 12, 2007 4:22 PM
Subject: Re: [LinuxBIOS] [IMPORT] GIGABYTE GA-2761GXDK


> Morgan Tsai wrote:
>> Dear ron,
>>
>> I got a problem. When I connect an existing FC6 hdd on GA-2761GXDK, the
>> message is:
>>
>> Jumping to boot code at 0x10dbf4
>> FILO version 0.5 (morgan at cvs.sis.com) Mon Oct. 8 16:42:41 CST 2007
>> Press <Enter> for default menu.lst (hde1:/boot/grub/menu.lst), or <Esc> 
>> for
>> prom
>> pt... timed out
>> menu: hde1:/boot/grub/menu.lst
>> hde: LBA 8622MB: ST38410A
>> Mounted ext2fs
>> Attempt to read out of device/partition
>> File not found
>> Press any key to continue.
>> .................
>>
>> I had installed Fedora 6 with another board, and the original root 
>> partition
>> is /dev/sda1
>> Any idea?  Thanks!
>
> Doesn't fedora's installer usually like to make a seperate /boot
> partition? If so, that's where you'll have to point FILO to. I don't
> think FILO can handle lvm either (another default "feature" last time I
> tried fedora), but I could be wrong.
>
> -Corey 





More information about the coreboot mailing list