[LinuxBIOS] [PATCH] BCOM WinNET100 improvements

Stefan Reinauer stepan at coresystems.de
Tue Oct 23 14:02:14 CEST 2007


* Uwe Hermann <uwe at hermann-uwe.de> [071014 19:10]:
> See patch.

> This patch should also fix the broken abuild-run on this board...
> 
> Thanks, Uwe.

> Some fixes for the BCOM WinNET100, mostly in Config.lb:
> 
>  - Add missing entry for the NIC:
> 
>      device pci 0f.0 on end           # Ethernet (onboard)
> 
>  - Drop the following lines:
> 
>      register "com1" = "{115200}"
>      register "com2" = "{38400}"
> 
>    Those entries hardcode the BAUD rate (as far as I can tell, please
>    correct me if I'm wrong). We don't want that -- instead the config option
>    TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those
>    lines will not break serial output (COM1, 115200, 8n1).
> 
>  - Enable IDE (PCI device 00:12.2) and add the following register lines
>    to tell the CS5530 code to actually enable IDE channel 0:
> 
>       register "ide0_enable" = "1"
>       register "ide1_enable" = "0"     # Not available/needed on this board
> 
>    Tested with a 2.5" hard drive and FILO, works fine.
> 
>  - Enable USB (PCI device 00:13.0), not sure why it was commented.
> 
>  - Enable COM2 as it's used by the smartcard reader.
> 
>  - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix
>    abuild for this board.
> 
>  - Add some more comments.
> 
> Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>

Acked-by: Stefan Reinauer <stepan at coresystems.de>

-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.dehttp://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866




More information about the coreboot mailing list