[LinuxBIOS] r2896 build service

LinuxBIOS information info at coresystems.de
Wed Oct 24 23:04:34 CEST 2007

Dear LinuxBIOS readers!

This is the automated build check service of LinuxBIOS.

The developer "uwe" checked in revision 2896 to
the LinuxBIOS source repository and caused the following 

Change Log:
Some fixes for the BCOM WinNET100, mostly in Config.lb:

 - Add missing entry for the NIC:

     device pci 0f.0 on end           # Ethernet (onboard)

 - Drop the following lines:

     register "com1" = "{115200}"
     register "com2" = "{38400}"

   Those entries hardcode the BAUD rate (as far as I can tell, please
   correct me if I'm wrong). We don't want that -- instead the config option
   TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those
   lines will not break serial output (COM1, 115200, 8n1).

 - Enable IDE (PCI device 00:12.2) and add the following register lines
   to tell the CS5530 code to actually enable IDE channel 0:

      register "ide0_enable" = "1"
      register "ide1_enable" = "0"     # Not available/needed on this board

   Tested with a 2.5" hard drive and FILO, works fine.

 - Enable USB (PCI device 00:13.0), not sure why it was commented.

 - Enable COM2 as it's used by the smartcard reader.

 - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix
   abuild for this board.

 - Add some more comments.

Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan at coresystems.de>

Build Log:
Compilation of arima:hdama is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=hdama&vendor=arima
Configuration of bcom:winnet100 has been fixed
Compilation of ibm:e325 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=e325&vendor=ibm
Compilation of ibm:e326 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=e326&vendor=ibm
Compilation of iei:juki-511p is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=juki-511p&vendor=iei
Compilation of iwill:dk8s2 is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=dk8s2&vendor=iwill
Compilation of iwill:dk8x is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=dk8x&vendor=iwill
Compilation of newisys:khepri is still broken
See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2896&device=khepri&vendor=newisys

If something broke during this checkin please be a pain 
in uwe's neck until the issue is fixed.

If this issue is not fixed within 24h the revision should 
be backed out.

   Best regards,
     LinuxBIOS automatic build system

More information about the coreboot mailing list