[LinuxBIOS] different versions of the GA-M57SLI-S4 (PLCC vs SPI)
st at iss.tu-darmstadt.de
Fri Sep 7 13:49:17 CEST 2007
> > Mh, i don't know anything about SPI, but i think if they also have
> > #init pins it should work.
> They don't.
If i remember correctly on my v1.0 M57SLI-S4 there have been SPI pins within
the PLCC connectors. These pins where not connected to any of the open
presumably SPI pins.
But well i don't have a new board and i don't know SPI stuff. But you should
try to measure all the pins i used for my stuff. Probably there is a
connection... or the CS# of both SPI chips is connected to different pins of
More information about the coreboot