[LinuxBIOS] MSI MS-6337 (i815 based)

[Jouni Mettälä]

I tried to flash. MS-6337 with recently added MS-6178. It was needed to put
WP# and TBL# pins to high but since another chip is in use it is ok.

With filo as payload, post card gave 10 ... pause... 80,  f8, fe ..short
pause and ff. (+ some other codes between them)

So at least ram is ok I think.

With very small kernel as payload post card gave just ff.

I didn't do any modifications to MS6178. Probably some is needed.

Any suggestions?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070914/db5a4b0b/attachment.html>