[LinuxBIOS] Missing IRQ table entries; irq_tables.c problem?

Uwe Hermann uwe at hermann-uwe.de
Sun Sep 16 23:31:13 CEST 2007

On Sun, Sep 16, 2007 at 12:31:09PM -0700, Jonathan Sturges wrote:
> Hi,
> I'm missing something obvious and need someone to point me in the right direction.
> I'm finishing up mapping IRQs on a CS5530 winterminal board I've got.  I know the IRQ mappings of each on-board device and slot, and I put together my irq_tables.c accordingly.  However, only the first 2 entries get written to the IRQ table, even though the file designates 3.  Then, when I boot the LB image, I get this warning:
> Inconsistent IRQ routing table size (0x40/0x50)
> The 0x50 makes sense; that's the "32+16*3" from my irq_tables.c.  But where is the size being set to 0x40?  It seems there's a configuration I missed somewhere.


  default IRQ_SLOT_COUNT=2

(or similar) in the Options.lb of your board.

> const struct irq_routing_table intel_irq_routing_table = {
>     PIRQ_SIGNATURE,  /* u32 signature */
>     PIRQ_VERSION,    /* u16 version   */
>     32+16*3,     /* there can be total 3 devices on the bus */

So this should be


This may or may not fix your issue. Please report back if it does.

http://www.hermann-uwe.de  | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20070916/0388e554/attachment.sig>

More information about the coreboot mailing list