[coreboot] Onboard VGA

[Bao C. Ha]

Hello,

How do I modify the Config.lb file to accomodate the onboard VGA?
Following is the relevant lspci:

01:00.0 VGA compatible controller: VIA Technologies, Inc. UniChrome Pro
IGP (rev 01) (prog-if 00 [VGA])
        Subsystem: VIA Technologies, Inc. UniChrome Pro IGP
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 5
        Memory at f4000000 (32-bit, prefetchable) [size=64M]
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at fc000000 [disabled] [size=64K]
        Capabilities: <access denied>

I don't think "device pci 01:00.0" is correct.

Thanks.
Bao
-- 
Best Regards.
Bao C. Ha
Hacom OpenBrick Distributor USA http://www.hacom.net
voice: (714) 564-9693 fax: (714) 564-9932
8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38