[coreboot] r151 - in buildrom-devel: config/platforms packages/coreboot-v2 packages/filo/conf

Tue Apr 22 00:17:56 CEST 2008

Author: uwe
Date: 2008-04-22 00:17:56 +0200 (Tue, 22 Apr 2008)
New Revision: 151

Added:
   buildrom-devel/config/platforms/asus_a8v-e_se.conf
   buildrom-devel/packages/coreboot-v2/asus_a8v-e_se.mk
   buildrom-devel/packages/filo/conf/asus_a8v-e_se-Config
Modified:
   buildrom-devel/config/platforms/Config.in
   buildrom-devel/config/platforms/platforms.conf
Log:
Initial buildrom support for the ASUS A8V-E SE board.
This code also works (and has been tested) on ASUS A8V-E Deluxe.
 
So far only FILO and Etherboot have been tested (Etherboot loads
fine but doesn't work as the old version we use in buildrom doesn't
support the onboard NIC on this board yet).
 
Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
Acked-by: Jordan Crouse <jordan.crouse at amd.com>



Modified: buildrom-devel/config/platforms/Config.in
===================================================================

--- buildrom-devel/config/platforms/Config.in	2008-04-19 14:52:31 UTC (rev 150)
+++ buildrom-devel/config/platforms/Config.in	2008-04-21 22:17:56 UTC (rev 151)
@@ -12,6 +12,10 @@
 config VENDOR_ARTEC_GROUP
 	bool "Artec Group"
 
+config VENDOR_ASUS
+	bool "ASUS"
+	depends COREBOOT_V2
+
 config VENDOR_ADVANCED_DIGITAL_LOGIC
 	bool "Advanced Digital Logic"
 
@@ -79,6 +83,13 @@
        select PLATFORM
        select PLATFORM_SUPPORT_64BIT
 
+config PLATFORM_ASUS_A8V_E_SE
+       bool "ASUS A8V-E SE"
+       depends VENDOR_ASUS
+       depends COREBOOT_V2
+       select PLATFORM
+       select PLATFORM_SUPPORT_64BIT
+
 config PLATFORM_GA_2761GXDK
 	bool "GIGABYTE GA-2761GXDK"
 	depends on VENDOR_GIGABYTE

Added: buildrom-devel/config/platforms/asus_a8v-e_se.conf
===================================================================
--- buildrom-devel/config/platforms/asus_a8v-e_se.conf	                        (rev 0)
+++ buildrom-devel/config/platforms/asus_a8v-e_se.conf	2008-04-21 22:17:56 UTC (rev 151)
@@ -0,0 +1,52 @@
+# Support for the ASUS A8V-E SE board
+
+#### Platform configuration
+
+CC=gcc
+STRIP=strip
+AS=as
+
+ifeq ($(CONFIG_TARGET_64BIT),y)
+TARGET_ARCH=x86_64
+CFLAGS_platform =
+else
+TARGET_ARCH=i686
+CFLAGS_platform =
+endif
+
+# Targets
+
+# TODO
+# KERNEL_MK=$(PACKAGE_DIR)/kernel/asus_a8v-e_se.mk
+CBV2_MK=$(PACKAGE_DIR)/coreboot-v2/asus_a8v-e_se.mk
+
+# kernel configuration (for LAB)
+
+# TODO
+# KERNEL_VERSION=2.6.22.2
+# 
+# ifeq ($(CONFIG_TARGET_64BIT),y)
+# $(error You must specify a kernel configuration for 64 bit)
+# else
+# KERNEL_CONFIG=$(PACKAGE_DIR)/kernel/conf/defconfig-asus_a8v-e_se
+# endif
+
+UCLIBC_ARCH=$(TARGET_ARCH)
+
+# Etherboot configuration
+
+ETHERBOOT_ARCH=i386
+
+# coreboot configuration
+
+COREBOOT_VENDOR=asus
+COREBOOT_BOARD=a8v-e_se
+CBV2_CONFIG=Config.lb
+CBV2_PAYLOAD_FILE_EXT=elf
+CBV2_TDIR=asus_a8v-e_se
+CBV2_TAG=3241
+
+# FILO configuration
+
+FILO_CONFIG=asus_a8v-e_se-Config
+

Modified: buildrom-devel/config/platforms/platforms.conf
===================================================================
--- buildrom-devel/config/platforms/platforms.conf	2008-04-19 14:52:31 UTC (rev 150)
+++ buildrom-devel/config/platforms/platforms.conf	2008-04-21 22:17:56 UTC (rev 151)
@@ -12,6 +12,7 @@
 PLATFORM-$(CONFIG_PLATFORM_DB800) = db800.conf
 PLATFORM-$(CONFIG_PLATFORM_DBE61) = dbe61.conf
 PLATFORM-$(CONFIG_PLATFORM_GA_M57SLI_S4) = m57sli.conf
+PLATFORM-$(CONFIG_PLATFORM_ASUS_A8V_E_SE) = asus_a8v-e_se.conf
 PLATFORM-$(CONFIG_PLATFORM_TYAN_S2881) = tyan-s2881.conf
 PLATFORM-$(CONFIG_PLATFORM_TYAN_S2882) = tyan-s2882.conf
 PLATFORM-$(CONFIG_PLATFORM_TYAN_S2891) = tyan-s2891.conf

Added: buildrom-devel/packages/coreboot-v2/asus_a8v-e_se.mk
===================================================================
--- buildrom-devel/packages/coreboot-v2/asus_a8v-e_se.mk	                        (rev 0)
+++ buildrom-devel/packages/coreboot-v2/asus_a8v-e_se.mk	2008-04-21 22:17:56 UTC (rev 151)
@@ -0,0 +1,41 @@
+ifeq ($(CONFIG_PLATFORM),y)
+ifeq ($(CBV2_TAG),)
+$(error You need to specify a version to pull in your platform config)
+endif
+endif
+
+CBV2_PATCHES= 
+
+# ifeq ($(CONFIG_PAYLOAD_KERNEL),y)
+# 	CBV2_CONFIG = Config-lab.lb
+# 	CBV2_PAYLOAD_FILE_EXT = elf.lzma
+# endif
+# 
+# ifeq ($(CONFIG_PAYLOAD_LAB),y)
+# 	CBV2_CONFIG = Config-lab.lb
+# 	CBV2_PAYLOAD_FILE_EXT = elf.lzma
+# endif
+
+
+CBV2_BASE_DIR=svn
+CBV2_URL=svn://coreboot.org/repos/trunk/coreboot-v2
+CBV2_TARBALL=coreboot-svn-$(CBV2_TAG).tar.gz
+CBV2_PAYLOAD_TARGET=$(CBV2_BUILD_DIR)/payload.$(CBV2_PAYLOAD_FILE_EXT)
+TARGET_ROM = $(COREBOOT_VENDOR)-$(COREBOOT_BOARD).rom
+
+include $(PACKAGE_DIR)/coreboot-v2/coreboot.inc
+
+$(SOURCE_DIR)/$(CBV2_TARBALL): 
+	@ echo "Fetching the coreboot code..."
+	@ mkdir -p $(SOURCE_DIR)/coreboot
+	@ $(BIN_DIR)/fetchsvn.sh $(CBV2_URL) $(SOURCE_DIR)/coreboot \
+	$(CBV2_TAG) $(SOURCE_DIR)/$(CBV2_TARBALL) \
+	> $(CBV2_FETCH_LOG) 2>&1
+
+$(OUTPUT_DIR)/$(TARGET_ROM): $(CBV2_OUTPUT)
+	@ mkdir -p $(OUTPUT_DIR)
+	@ cat $(CBV2_OUTPUT) > $@
+	
+coreboot: $(OUTPUT_DIR)/$(TARGET_ROM)
+coreboot-clean: generic-coreboot-clean
+coreboot-distclean: generic-coreboot-distclean

Added: buildrom-devel/packages/filo/conf/asus_a8v-e_se-Config
===================================================================
--- buildrom-devel/packages/filo/conf/asus_a8v-e_se-Config	                        (rev 0)
+++ buildrom-devel/packages/filo/conf/asus_a8v-e_se-Config	2008-04-21 22:17:56 UTC (rev 151)
@@ -0,0 +1,17 @@
+USE_GRUB = 1
+MENULST_FILE = "hda2:/boot/grub/menu.lst"
+IDE_DISK = 1
+IDE_DISK_POLL_DELAY = 1
+SLOW_SATA = 1
+USB_DISK = 1
+VGA_CONSOLE = 1
+PC_KEYBOARD = 1
+SERIAL_CONSOLE = 1
+SERIAL_IOBASE = 0x3f8
+SERIAL_SPEED = 115200
+FSYS_EXT2FS = 1
+FSYS_ISO9660 = 1
+ELTORITO = 1
+SUPPORT_PCI = 1
+PCI_BRUTE_SCAN = 1
+LINUX_LOADER = 1



