[coreboot] Problem booting 2.6.24 with db800-Board

Marc Jones Marc.Jones at amd.com
Tue Apr 29 17:54:41 CEST 2008

Jordan Crouse wrote:
> On 29/04/08 13:18 +0200, Peter Stuge wrote:
>> Hi Uwe,
>> On Tue, Apr 29, 2008 at 12:47:18PM +0200, Uwe Schwarz wrote:
>>> I try to boot linux 2.6.24 with coreboot-v2 and filo on a db800
>>> (geode lx) board, but it hangs when probing for PCI.
>> I think this is a known issue.
>>> geode-mfgpt:  Registered timer 0
>>> mfgpt-timer:  registering the MFGT timer as a clock event.
>>> geode:  2 MFGPT timers available.
>> MFGPT timers on LX boards seem to not yet work correctly.
> Hmmm - no, this is badness.  2.4.24 and db800 should work fine in -v2.
> At least, it worked fine last time I booted a few weeks ago.  We must
> have regressed.
> Jordan

I found and fixed one issue(r3219) in the new (r3196) generic irq 
routing code back at the summit but it seems like there is still 
something wrong. Also, which VSA is getting built in?


Marc Jones
Senior Firmware Engineer
(970) 226-9684 Office
mailto:Marc.Jones at amd.com

More information about the coreboot mailing list