[coreboot] v3 cn700 patch dump
c-d.hailfinger.devel.2006 at gmx.net
Wed Dec 10 12:40:37 CET 2008
On 10.12.2008 11:00, Corey Osgood wrote:
> On Tue, Dec 9, 2008 at 12:15 PM, Corey Osgood <corey.osgood at gmail.com>wrote:
>> Attached is the net result of what I've done to try to figure out what's
>> going on with the cn700, right now it reboots part of the way through
>> initram, probably as a result of the GP3 timer not getting reset like it
>> should. I'm heading into finals week, so I probably won't be able to get
>> back to this until late December.
> Ignore that patch, something Carl-Daniel quoted that I just read reminded me
> what the problem was, it was my 1Mbit flash chip not being set up properly.
> Attached patch fixes that, checks for CAR area and ROM collision (for C7 at
> least), and....well, just look at the patch.
> This patch:
> * Moves non-DRAM early init code out of initram and into stage1, where it should have been in the first place
> * Fixes an issue with GP3 timer causing system reboot (possibly not present in current svn, but was present in my local copy)
> * Fixes serial garbage from stage1 on jetway j7f2
> * Fixes ROM mapping for flash > 512k on vt8237
> * Checks that the CAR base + size allows for the selected ROM size
Could you move the CAR base + size checks into a separate patch? That
would be great.
> * Makes a couple minor whitespace changes
> * Moves some function prototypes to the headers where they belong
> * Nukes some phase2 hackery that belongs in phase4 (eventually)
> * Comments out early_mtrr_init() for via/epia-cn, this breaks booting on jetway j7f2
early_mtrr_init is broken for ALL chipsets and processors because it
disables CAR. I plan to nuke it or at least rewrite it completely. Don't
just comment the call out, remove the call altogether.
> * Moves troublesome SATA init code into stage1 - change of device class hangs coreboot
> * Gets to vt8237 IDE phase6 init and dies on jetway/j7f2:
> Phase 6: Initializing devices...
> Phase 6: Root Device init.
> Phase 6: PCI: 00:10.1 init.
> Primary IDE interface enabled
> Secondary IDE interface enabled
> Signed-off-by: Corey Osgood <corey.osgood at gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
One question remains, though. You removed some code which I didn't see
reappear anywhere. Example follows.
> Index: northbridge/via/cn700/initram.c
> --- northbridge/via/cn700/initram.c (revision 1066)
> +++ northbridge/via/cn700/initram.c (working copy)
> @@ -353,10 +262,6 @@
> pci_conf1_write_config8(dev->d0f3, 0x74, 0x04);
> pci_conf1_write_config8(dev->d0f3, 0x75, 0x04);
> pci_conf1_write_config8(dev->d0f3, 0x76, 0x00);
> - /* Thanks to Urbez Santana Roma for this */
> - pci_conf1_write_config8(dev->d1f0, 0x19, 0x1);
> - pci_conf1_write_config8(dev->d1f0, 0x1a, 0x1);
Is that code obsolete? I couldn't find any mentioning of it in your
More information about the coreboot