[coreboot] Error Compiling Coreboot v1 for Acer WT300

Uwe Hermann uwe at hermann-uwe.de
Mon Dec 15 13:42:03 CET 2008


On Mon, Dec 15, 2008 at 05:20:56PM +0800, Holden Hao wrote:
> > Coreboot-v1 is VERY old, IIRC it requires gcc 2.xx to compile. Perhaps I
> > could talk you into using coreboot-v2 instead? I see that the Axus TC320 and
> > Bcom WinNet 100 share the same hardware as your board, so porting your board
> > shouldn't require much work. You can find a build tutorial here:
> > http://www.coreboot.org/AXUS_TC320#Building_a_LinuxBIOS_image and various
> > other resources by exploring around coreboot.org. If you need a hand, let
> > us know!
> >
> 
> 
> I have already compiled an Coreboot rom and have burned it into a chip using
> a PROM burner.   However, I could not see any output from the console.
> Reading the article from the other person who has successfully compiled
> Coreboot + Etherboot, the com port of the Acer WT 300 is in com 2 and not
> com 1.  As I understand it, the default com port for coreboot is ttyS0. What
> option can I use to change the default console port to ttyS1?  There seems
> to be no options for this from the Wiki page which lists the available
> options for Coreboot V2.  My config file is below:
 
Try the attached patch, something like that should work (untested).


HTH, Uwe
-- 
http://www.hermann-uwe.de  | http://www.holsham-traders.de
http://www.crazy-hacks.org | http://www.unmaintained-free-software.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: axus_com2.patch
Type: text/x-diff
Size: 1431 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081215/ccdd8ae8/attachment.bin>


More information about the coreboot mailing list