[coreboot] v3 patches and question

[Myles Watson]

On Thu, Dec 18, 2008 at 11:41 AM, Marc Jones <marcj303 at gmail.com> wrote:

> On Wed, Dec 17, 2008 at 1:42 PM, Myles Watson <mylesgw at gmail.com> wrote:
> > serengeti.diff and dtc-links.diff make serengeti find all of its devices
> > correctly.
> >
> > serengeti.diff
> > - takes out the multiple links for the Opteron (they weren't working
> > correctly)
> > - adds the 8132 devices and makes them pci_a so they don't conflict with
> the
> > 8111
> > - corrects the disabled flags (I think we should have a build error
> > somewhere when there are incorrect flags)
> > - moves the lpc device to the lpc bus
> > - adds back in the second Opteron
> >
> > Signed-off-by: Myles Watson <mylesgw at gmail.com>
> >
>
> Acked-by: Marc Jones <marcj303 at gmail.com>
> But what about amd8151?

I don't know how to put it in correctly right now.  There isn't a working
way to represent multiple busses from a single device in the dts.  Since I
can't test the 8151 (free version of SimNow), this is as complete as I can
make it.

I won't commit since I have to change the dtc code to make this work.

> dtc-links.diff
> > - removes multiple link code.  I know someone could probably fix it, but
> > it's broken and not needed for now.
> > It made siblings that were bridges be multiple links on the same device.
> > That messed a lot of things up for Serengeti.  I think it could be
> changed
> > so that siblings with the same PCI identifier that are bridges become
> > multiple links.  It's ugly, though.
> >
> > Signed-off-by: Myles Watson <mylesgw at gmail.com>
> >
>
> So how does this allow amd8151 to be on a separate link?
>
It doesn't.  I'm not sure how to do that. (See above.)


> > pci_match_v2.diff:
> > Even though Serengeti seems to work the same as v2, it still won't show
> > anything on the display.  The VGA device is not claiming the
> 0xa0000-0xc0000
> > address space.  Since SimNOW is a simulator, I trace the memory space to
> see
> > that the VGA writes are going to RAM.
> >
> > I put this in to make the PCI config space bit-for-bit identical at VGA
> ROM
> > run.  It still doesn't work. :(  Any help would be appreciated.
>
> You have probably look but amdk8_create_vga_resource is working correctly?
>
It seems like it.  The register in the routing table gets set up correctly.
I didn't have to mess with that to get it exactly the same as v2.

Thanks,
Myles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20081218/16181940/attachment.html>