[coreboot] PIRQ Tables

Cimino Vittorio cimino at teamufficio.it
Wed Jan 16 13:10:00 CET 2008

tnx but i know this !

I try to explain (sorry for the english)

I have made a pirq table as show into the web page of the linuxbios.org with
a kernel 2.6.23. The routing table made for the motherboard work, the
request are signaled to the kernel and after to the driver better.

With the same pirq table a kernel 2.4.24 (or 2.6.13) don't work.

There are a kernel option for like (MESSAGE SIGNALED INTERRUPTD) that
override a bad pirq table?


----- Original Message ----- 
From: "ron minnich" <rminnich at gmail.com>
To: "Cimino Vittorio" <cimino at teamufficio.it>
Cc: <linuxbios at linuxbios.org>
Sent: Tuesday, January 15, 2008 10:25 PM
Subject: Re: [coreboot] PIRQ Tables

> I assume you don't want a PIRQ table at all?
> In your TARGET config file, e.g.
> targets/iwill/dk8s2/Config.lb
> add the lines
> option HAVE_PIRQ_TABLE=0
> ron
> -- 
> coreboot mailing list
> coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot

More information about the coreboot mailing list