[coreboot] [cbv2]Add serial port information to lbtable

[Peter Stuge]

On Tue, Jan 22, 2008 at 09:43:35PM +0100, Patrick Georgi wrote:
> This patch adds a new record type for lbtable to provide information
> about a serial port. If a port is defined in the board configuration,
> add it to lbtable.
> 
> Signed-off-by: Patrick Georgi <patrick at georgi-clan.de>

Acked-by: Peter Stuge <peter at stuge.se>



> Index: src/include/boot/coreboot_tables.h
> ===================================================================
> --- src/include/boot/coreboot_tables.h	(Revision 3066)
> +++ src/include/boot/coreboot_tables.h	(Arbeitskopie)
> @@ -138,6 +138,13 @@
>  	uint8_t  string[0];
>  };
>  
> +#define LB_TAG_SERIAL		0x000f
> +struct lb_serial {
> +	uint32_t tag;
> +	uint32_t size;
> +	uint16_t ioport;
> +};
> +
>  /* The following structures are for the cmos definitions table */
>  #define LB_TAG_CMOS_OPTION_TABLE 200
>  /* cmos header record */
> Index: src/arch/i386/boot/coreboot_table.c
> ===================================================================
> --- src/arch/i386/boot/coreboot_table.c	(Revision 3066)
> +++ src/arch/i386/boot/coreboot_table.c	(Arbeitskopie)
> @@ -74,6 +74,22 @@
>  	return mem;
>  }
>  
> +struct lb_serial *lb_serial(struct lb_header *header)
> +{
> +#if defined(TTYS0_BASE)
> +	struct lb_record *rec;
> +	struct lb_serial *serial;
> +	rec = lb_new_record(header);
> +	serial = (struct lb_serial *)rec;
> +	serial->tag = LB_TAG_SERIAL;
> +	serial->size = sizeof(*serial);
> +	serial->ioport = TTYS0_BASE;
> +	return serial;
> +#else
> +	return header;
> +#endif
> +}
> +
>  struct lb_mainboard *lb_mainboard(struct lb_header *header)
>  {
>  	struct lb_record *rec;
> @@ -406,8 +422,10 @@
>  	 * size of the coreboot table.
>  	 */
>  
> -	/* Record our motheboard */
> +	/* Record our motherboard */
>  	lb_mainboard(head);
> +	/* Record the serial port, if present */
> +	lb_serial(head);
>  	/* Record our various random string information */
>  	lb_strings(head);
>