[coreboot] alix1c and v3

Peter Stuge peter at stuge.se
Sun Jan 27 06:35:40 CET 2008

On Sat, Jan 26, 2008 at 09:07:23PM -0800, ron minnich wrote:
> OK, VSA is running fine. BUT, after VSA runs, memory at 0x1000 is
> ZERO'd. This is Bad, as this is where stage2 lives!

Can you confirm it is not zero before calling do_vsmbios() and zero
immediately after returning? That would indicate that the VSA setup
empties the area.


More information about the coreboot mailing list