[coreboot] Black window when running qemu with coreboot+LegacyBIOS

[Jordan Crouse]

On 20/06/08 08:56 -0400, Kevin O'Connor wrote:
> On Fri, Jun 20, 2008 at 11:01:14AM +0800, Zhang Rui wrote:
> > 2008/6/19 Kevin O'Connor <kevin at koconnor.net>:
> > I get the right elf file after I executed:
> >         ld -melf_i386 -e 0xf66e0 -Tdata 0xf0000 -b binary bios.bin -o
> > bios.bin.elf
> 
> Okay, thanks.  I've checked this change into latest git.
> 
> > And then I build it as payload of coreboot and then run qemu with coreboot.
> > I get the following messages in the console:
> > 
> > [...]
> > enter handle_10: a=00000e0a b=00000000 c=00000000 d=00000000
> > si=00000000 di=00000000
> >   ds=00000000 es=00000000 ip=0000e818 cs=0000f000 f=00000002 r=0000f674
> > enter handle_18: NULL
> > No bootable device.
> > 
> > Is that OK?
> 
> You have succesfully launched LegacyBIOS.  However, the vga rom was
> not found.  Make sure you're running with the latest vgabios.  Also,
> you probably haven't specified a floppy, hard drive, or cdrom to boot
> from.

We should discuss what needs to be done to bring this goodness to buildrom.

Jordan

-- 
Jordan Crouse
Systems Software Development Engineer 
Advanced Micro Devices, Inc.