[coreboot] flashrom verify fails, CK804, MCP55
Tiago Marques
tiagomnm at gmail.com
Sat Jun 21 17:50:12 CEST 2008
I would rather do it by e-mail, for now.
What information would you need?
Best regards
On 6/21/08, Peter Stuge <peter at stuge.se> wrote:
> Dear Tiago,
>
>
> On Sun, Jun 01, 2008 at 04:09:07PM +0100, Tiago Marques wrote:
> > Finally had some time to test this.
> > The erase command does nothing, I was still able to download the
> > full BIOS and boot the machine. This using the latest flashrom
> > revision. First step is to make it erase? Where should I start?
>
>
> If this is the case with both Winbond and PMC flash chips it seems
> like the write disable signals to the chip were set, but in that
> case it would not have been possible for flashrom to PROBE
> successfully. Hm.
>
> I am interested in debugging this. Would it be possible for you to
> join our IRC channel sometime for a more effective session?
>
> irc.freenode.net #coreboot
>
> If not, we can do email too. :)
>
>
> //Peter
>
>
> --
> coreboot mailing list
> coreboot at coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>
More information about the coreboot
mailing list