[coreboot] s2881 - IDE path problem in GRUB if SATA is enabled

[Baski]

Hi,
I had originally configured FILO for PCI support in IDE driver.  When SATA was enabled, it moved around the bus/slot.  Now I compiled FILO without PCI support and it works fine now.
Thanks - Baski

Ward Vandewege <ward at gnu.org> wrote: On Fri, Mar 07, 2008 at 02:31:30PM -0800, Baski wrote:
>    My Config - tyan 2881 + FILO payload + ubuntu on IDE-0 + LBv2
> 
>    So far I've been using this setup with onboard SATA disabled.
>    Today I opened the jumper and enabled the SATA.  It stopped at Grub
>    console.  I manually entered the path for the boot drive "root (hd0,0)",
>    but it says something like
>    hda1:/boot/vmlinuz.... 'Drive 0 not present'.
>    The original BIOS boots ok.

Try (hd4,0), and hde1.

Thanks,
Ward.

-- 
Ward Vandewege 
Free Software Foundation - Senior System Administrator


       
---------------------------------
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20080308/9db0dce1/attachment.html>