[coreboot] alix1c PATA
jordan.crouse at amd.com
Mon May 5 18:54:05 CEST 2008
On 05/05/08 10:50 -0600, Jordan Crouse wrote:
> On 05/05/08 18:32 +0200, Peter Stuge wrote:
> > On Mon, May 05, 2008 at 09:26:39AM -0600, Jordan Crouse wrote:
> > > > > pata_cs5536: disabled by BIOS
> > > >
> > > > Hmm, I wonder if this is something coreboot has disabled or not
> > > > enabled?
> > > > drivers/ata/pata_cs5536.c:244 tests a bit in the IDE config
> > > > register of CS5536.
> > >
> > > Can you try the legacy driver (ide/pci/amd74xx.c)?
> > Will try later.
> > > It sounds like the libata port brought over something distasteful.
> > > I've been using the old CS5536 driver for a very long time no with
> > > no problems.
> > Regardless, no bit should indicate that PATA is disabled.
> > Particularly surprising since IDE is enabled from reset.
> The enable bits for the AMD74XX controller (which the 5536 uses) are
> in PCI config byte 0x40. bit 1 is the enable bit for port 0 and bit 0
> is the enable bit for port 1.
> I have just tried both db800 and norwich in v2 with the legacy AMD5536 driver
> and both worked (well, db800 puked, but for other reasons). Here's the
> boot log:
> AMD5536: IDE controller (0x1022:0x209a rev 0x01) at PCI slot 0000:00:0f.2
> AMD5536: not 100% native mode: will probe irqs later
> AMD5536: 0000:00:0f.2 (rev 01) UDMA100 controller
> ide0: BM-DMA at 0x1ca0-0x1ca7, BIOS settings: hda:pio, hdb:pio
> AMD5536: IDE port disabled
> The last line is the secondary bus being disabled.
> I looked at the libata driver, and it seems to be doing the right thing -
> reading 0x40 and checking bit 1.
> So I checked the code: in v2, src/southbridge/amd/cs5536/cs5536_ide.c
> handles the honors.
> So long story short - this is possibly something that just never got
> brought over to v3?
Followup - the code is in v3, but is gated by sb->enable_ide, which
defaults to 0. I presume thats where your problem lies.
Systems Software Development Engineer
Advanced Micro Devices, Inc.
More information about the coreboot